Best Long Length Drill Bits. Reviews August, 2020

12" Long Brad Point Bit Set (7 Drill Bit Set). Perfect For Drilling Wood, Plastic, Drywall and Composite Materials

Search only Fulton brand name
12

Current price: 21.99 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.

More Info

Neiko 10047A 12” Extra Long Drill Bit Set, 5 Piece | 1/8", 3/16", 1/4", 5/16", 3/8"

Search only Neiko brand name
Neiko 10047A 12” Extra Long Drill Bit Set, 5 Piece | 1/8

Current price: 15.95 USD


Check price and availability


Height: 2.8 Inches

Length: 13 Inches

Width: 3.1 Inches

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life

More Info

IRWIN SPEEDBOR Drill Bit, Long Shank, Wood Boring (88716)

Search only IRWIN brand name
IRWIN SPEEDBOR Drill Bit, Long Shank, Wood Boring (88716)

Current price: 9.98 USD

Saving: $5.60 (36%)


Check price and availability


Height: 0.5 Inches

Length: 16 Inches

Width: 1.1 Inches

Weight: 0.2 Pounds

Warranty: Manufacturer

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • For 1/4" and larger electric drills; not for use in drill press
  • Made from Irwin's own special grade tool steel, heat-treated for extra strength
  • Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
  • Bore 2 times faster, last 3 times longer
  • 1" diameter and an extra-long 16" length for longer reach, includes pouch
  • 10% larger shank for added durability
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • Blue-Groove point and cutting edge for faster chip removal

More Info

Bosch BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit

Search only BOSCH brand name
Bosch BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit

Current price: 4.99 USD

Saving: $2.53 (34%)


Check price and availability


Warranty: No

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • For 1/4" and larger electric drills; not for use in drill press
  • Made from Irwin's own special grade tool steel, heat-treated for extra strength
  • Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
  • Bore 2 times faster, last 3 times longer
  • 1" diameter and an extra-long 16" length for longer reach, includes pouch
  • 10% larger shank for added durability
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • Blue-Groove point and cutting edge for faster chip removal
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits

More Info

13Pc 1/16"-1/4" x 64ths 6" Inch Long Aircraft Extension Drill Set

Search only LLDSIMEX brand name
13Pc 1/16

Current price: 21.99 USD


Check price and availability


Weight: 1.10231131 Pounds

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • For 1/4" and larger electric drills; not for use in drill press
  • Made from Irwin's own special grade tool steel, heat-treated for extra strength
  • Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
  • Bore 2 times faster, last 3 times longer
  • 1" diameter and an extra-long 16" length for longer reach, includes pouch
  • 10% larger shank for added durability
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • Blue-Groove point and cutting edge for faster chip removal
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)

More Info

Drill America 1/4" x 12" Cobalt Aircraft Extension Drill Bit, GLBCO Series

Search only Drill America brand name
Drill America 1/4

Current price: 9.09 USD


Check price and availability


Height: 2 Inches

Length: 6 Inches

Width: 4 Inches

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • For 1/4" and larger electric drills; not for use in drill press
  • Made from Irwin's own special grade tool steel, heat-treated for extra strength
  • Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
  • Bore 2 times faster, last 3 times longer
  • 1" diameter and an extra-long 16" length for longer reach, includes pouch
  • 10% larger shank for added durability
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • Blue-Groove point and cutting edge for faster chip removal
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)
  • 12" overall length for drilling where extra length for reach is required
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Round shanks allow use with a wide variety of tool holding systems
  • 135° split point tip prevents drill from walking
  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium

More Info

DEWALT DW1606 1/4-Inch by 12-Inch Extra Long Black Oxide Drill Bit

Search only DEWALT brand name
DEWALT DW1606 1/4-Inch by 12-Inch Extra Long Black Oxide Drill Bit

Current price: 9.99 USD

Saving: $7.09 (42%)


Check price and availability


Height: 0.3 Inches

Length: 14.7 Inches

Width: 1.9 Inches

Weight: 0.1 Pounds

Warranty: 1 Year Full Warranty

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • For 1/4" and larger electric drills; not for use in drill press
  • Made from Irwin's own special grade tool steel, heat-treated for extra strength
  • Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
  • Bore 2 times faster, last 3 times longer
  • 1" diameter and an extra-long 16" length for longer reach, includes pouch
  • 10% larger shank for added durability
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • Blue-Groove point and cutting edge for faster chip removal
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)
  • 12" overall length for drilling where extra length for reach is required
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Round shanks allow use with a wide variety of tool holding systems
  • 135° split point tip prevents drill from walking
  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/4x12 has STL drill bit

More Info

DEWALT DW1602-1/8-Inch by 12-Inch Extra Long Black Oxide Drill Bit

Search only DEWALT brand name
DEWALT DW1602-1/8-Inch by 12-Inch Extra Long Black Oxide Drill Bit

Current price: 5.98 USD

Saving: $8.32 (58%)


Check price and availability


Height: 0.2 Inches

Length: 14.7 Inches

Width: 1.9 Inches

Weight: 0.08 Pounds

Warranty: 1 Year Full Warranty

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • For 1/4" and larger electric drills; not for use in drill press
  • Made from Irwin's own special grade tool steel, heat-treated for extra strength
  • Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
  • Bore 2 times faster, last 3 times longer
  • 1" diameter and an extra-long 16" length for longer reach, includes pouch
  • 10% larger shank for added durability
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • Blue-Groove point and cutting edge for faster chip removal
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)
  • 12" overall length for drilling where extra length for reach is required
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Round shanks allow use with a wide variety of tool holding systems
  • 135° split point tip prevents drill from walking
  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/4x12 has STL drill bit
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit

More Info

Drill America 1/4" x 8" High Speed Steel Extra Long Drill Bit, DWDDL Series

Search only Drill America brand name
Drill America 1/4

Current price: 9.19 USD


Check price and availability


  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • For 1/4" and larger electric drills; not for use in drill press
  • Made from Irwin's own special grade tool steel, heat-treated for extra strength
  • Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
  • Bore 2 times faster, last 3 times longer
  • 1" diameter and an extra-long 16" length for longer reach, includes pouch
  • 10% larger shank for added durability
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • Blue-Groove point and cutting edge for faster chip removal
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)
  • 12" overall length for drilling where extra length for reach is required
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Round shanks allow use with a wide variety of tool holding systems
  • 135° split point tip prevents drill from walking
  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/4x12 has STL drill bit
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

Neiko 10224A Extra Long Security Power Bit Set, 32 Piece | 1/4" Shank, 6" Length | Premium S2 Steel

Search only Neiko brand name
Neiko 10224A Extra Long Security Power Bit Set, 32 Piece | 1/4

Current price: 19.99 USD


Check price and availability


Height: 2.1 Inches

Length: 6.5 Inches

Width: 3.1 Inches

Weight: 2.6 Pounds

  • Each bit is engraved with the size for easy identification.
  • The extra long brad point drill bit set comes with the following diameter drill bits: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" and 1/2".
  • Brad point drill bits don't move from the original contact point which tends to produce much more accurate and cleaner results.
  • Woodworkers love to use brad point drill bits on most all of there projects.
  • If you have drilled a piece of wood and came up short or had to somehow line it up from the other side and attempt to correctly drill, then this drill bit set is for you. Each bit in the set is approximately 12" long and they are made from high speed steel. Typically brad point drill bits are perfect for drilling wood, plastic and some composite materials. Brad points have a sharp point on the tip, which prevents the bit from "walking" like standard twist bits tend to do.
  • Includes a full set of standard sizes to meet every job’s need: 1/8 inch, 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch
  • Versatile tool is ideal for drilling in metal, wood, plastic, PVC and other different materials
  • Great for general purpose use on hand drills and allows you to access hard to reach areas where jobber length drills can not go
  • Extra long 12 inch body provides better stability and balance during quick operation to ensure position is intact
  • High speed steel construction is designed for durability and extended tool life
  • For 1/4" and larger electric drills; not for use in drill press
  • Made from Irwin's own special grade tool steel, heat-treated for extra strength
  • Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
  • Bore 2 times faster, last 3 times longer
  • 1" diameter and an extra-long 16" length for longer reach, includes pouch
  • 10% larger shank for added durability
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • Blue-Groove point and cutting edge for faster chip removal
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • Easier drilling, reduced heat and extended drill bit life
  • Last 50 percent longer than high-speed steel
  • Speed helix design for three times faster drilling than standard bits
  • Includes: Metal Box
  • For standard duty, general purpose deep drilling operations
  • Used with hand held manual drills and portable or stationary machines
  • Size Range: 1/16" to 1/4" by 64ths
  • M2 Material High Speed Steel (HSS)
  • 12" overall length for drilling where extra length for reach is required
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Round shanks allow use with a wide variety of tool holding systems
  • 135° split point tip prevents drill from walking
  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/4x12 has STL drill bit
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute
  • Black oxide coated for greater wear resistance
  • Parabolic flute design improves chip ejection in metal and wood drilling applications
  • 135 degree split point drills on contact and prevents walking
  • The product is manufactured in China
  • Easy to use
  • The product is 1/8x12 has STL drill bit
  • For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Fits universal 1/4 inch hex shanks and set includes: 9 Torx Tamper: T8, T10, T15, T20, T25, T27, T30, T35, T40, 6 Hex Tamper: 2, 2.5, 3, 4, 5, 6 mm, 4 Tri-Wing: #1, #2, #3, #4, 4 Spanner: 4, 6, 8, 10 mm, 3 Torque Bit: 6, 8, 10 mm, 3 Pozi Drive: PZ1, PZ2, PZ3, 2 Philips: #1, #2, 1 Slotted: 6 mm
  • Comes organized in a compact hard plastic storage case for easy transportation
  • 6-inch length is ideal for working with electronic appliances
  • All security bits are made to last with S2 Steel construction; suitable for industrial use and with hand, air, or power tools
  • Includes uncommon bits that will loosen tamper-proof security bits that cannot be unscrewed by regular screwdrivers

More Info

1    2    3    4    5    6    7    8    9    10