Best Marking . Reviews November, 2020

Rust-Oleum 266590 Professional 2X Distance Inverted Marking Spray Paint, 15 oz, Fluorescent Red Orange

Search only Rust-Oleum brand name
Rust-Oleum 266590 Professional 2X Distance Inverted Marking Spray Paint, 15 oz, Fluorescent Red Orange

Current price: 5.98 USD


Check price and availability


Height: 8.25 Inches

Length: 2.63 Inches

Width: 2.63 Inches

Weight: 1.21 Pounds

  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more

More Info

Marking Knife Woodworking Marking Knife Thin Blade Dual Double Bevel Striking Knife Hardened Mn-V Steel Heat Treated Striking Marking Knife (2 Pieces)

Search only Mudder brand name
Marking Knife Woodworking Marking Knife Thin Blade Dual Double Bevel Striking Knife Hardened Mn-V Steel Heat Treated Striking Marking Knife (2 Pieces)

Current price: 6.59 USD


Check price and availability


Height: 0.787401574 Inches

Length: 7.086614166 Inches

Width: 2.362204722 Inches

  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use

More Info

Taytools 465494 Wheel Marking Gauge Depth Gauge with Solid Brass Machined Head Hardened .310 inch Diameter Beam Hardened High Speed Steel Cutting Wheel Overall Length 8 Inches Easy Read SAE and Metric

Search only Taytools brand name
Taytools 465494 Wheel Marking Gauge Depth Gauge with Solid Brass Machined Head Hardened .310 inch Diameter Beam Hardened High Speed Steel Cutting Wheel Overall Length 8 Inches Easy Read SAE and Metric

Current price: 16.99 USD


Check price and availability


  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.

More Info

Incra T-RULE12 12-Inch Precision Marking T-Rule

Search only INCRA brand name
Incra T-RULE12 12-Inch Precision Marking T-Rule

Current price: 33.54 USD


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 0.32 Pounds

  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Limited 1-year warranty
  • Locate your sharp pencil or scribe with absolute precision
  • Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-Inch scale position
  • Combination square for marking with perfect, instant accuracy
  • Precise, versatile and easy-to-use T-Rule
  • There are micro-fine marking holes and slots at every 1/16-, 1/32
  • Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy
  • Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule

More Info

Taytools 467603 Wheel Marking Gauge Solid Machined Brass Head, 2 Extra High Speed Cutters.310 inch Diameter Hardened Beam 8 Inches Easy Read SAE and Metric Grads

Search only Taytools brand name
Taytools 467603 Wheel Marking Gauge Solid Machined Brass Head, 2 Extra High Speed Cutters.310 inch Diameter Hardened Beam 8 Inches Easy Read SAE and Metric Grads

Current price: 18.99 USD


Check price and availability


  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Limited 1-year warranty
  • Locate your sharp pencil or scribe with absolute precision
  • Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-Inch scale position
  • Combination square for marking with perfect, instant accuracy
  • Precise, versatile and easy-to-use T-Rule
  • There are micro-fine marking holes and slots at every 1/16-, 1/32
  • Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy
  • Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam has mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cutter can be easily resharpened by rubbing the flat surface on any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The gauge comes fitted with a cutter and two extra cutters are included. The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.

More Info

200 PCS Dot Shaped Floor Marking Tape 3.5" Vinyl Floor Dot Removable Classroom Line Marker Social Distancing Dot Sticker Blue

Search only EVQ brand name
200 PCS Dot Shaped Floor Marking Tape 3.5

Current price: 29.99 USD


Check price and availability


  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Limited 1-year warranty
  • Locate your sharp pencil or scribe with absolute precision
  • Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-Inch scale position
  • Combination square for marking with perfect, instant accuracy
  • Precise, versatile and easy-to-use T-Rule
  • There are micro-fine marking holes and slots at every 1/16-, 1/32
  • Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy
  • Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam has mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cutter can be easily resharpened by rubbing the flat surface on any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The gauge comes fitted with a cutter and two extra cutters are included. The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Can be widely used for classroom linup, floor marking, warehouse marking, pipe markers, social distancing warning sign, directional sign, school, business.
  • Easy to USE & REMOVE, everybody can install it in a few sample steps, peel & stick, when you remove it, no glue will remain on the surface;
  • Made of vinyl, reusable & removable gel, waterproof material, durable to use, it can be used on any flat surface, such as concrete, tile, carpet, wall, vinyl seat/table, window etc;
  • 3.5" diameter dot sticker, 200 PCS dots per roll;
  • Self adhesive vinyl dot shaped sticker tape;

More Info

Big Horn 19061 Marking / Striking / Scribing Knife

Search only Big Horn brand name
Big Horn 19061 Marking / Striking / Scribing Knife

Current price: 8.39 USD

Saving: $2.91 (26%)


Check price and availability


Height: 0.8 Inches

Length: 7 Inches

Width: 0.8 Inches

Weight: 0.1 Pounds

  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Limited 1-year warranty
  • Locate your sharp pencil or scribe with absolute precision
  • Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-Inch scale position
  • Combination square for marking with perfect, instant accuracy
  • Precise, versatile and easy-to-use T-Rule
  • There are micro-fine marking holes and slots at every 1/16-, 1/32
  • Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy
  • Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam has mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cutter can be easily resharpened by rubbing the flat surface on any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The gauge comes fitted with a cutter and two extra cutters are included. The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Can be widely used for classroom linup, floor marking, warehouse marking, pipe markers, social distancing warning sign, directional sign, school, business.
  • Easy to USE & REMOVE, everybody can install it in a few sample steps, peel & stick, when you remove it, no glue will remain on the surface;
  • Made of vinyl, reusable & removable gel, waterproof material, durable to use, it can be used on any flat surface, such as concrete, tile, carpet, wall, vinyl seat/table, window etc;
  • 3.5" diameter dot sticker, 200 PCS dots per roll;
  • Self adhesive vinyl dot shaped sticker tape;
  • Defines an exact line for starting a chisel or saw blade
  • Blade is beveled on one side only to keep the cut absolutely tight to your rule or square
  • This knife can draw a much finer line than an awl or pencil
  • Double beveled for both right and left hand Scribing

More Info

Narex Czech Steel Super Thin Dual Bevel Dovetail Carving Striking Marking Knife with Hardened Cr-Mn Steel Heat Treated Blade to HRc 58 813900

Search only Narex brand name
Narex Czech Steel Super Thin Dual Bevel Dovetail Carving Striking Marking Knife with Hardened Cr-Mn Steel Heat Treated Blade to HRc 58 813900

Current price: 21.99 USD


Check price and availability


  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Limited 1-year warranty
  • Locate your sharp pencil or scribe with absolute precision
  • Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-Inch scale position
  • Combination square for marking with perfect, instant accuracy
  • Precise, versatile and easy-to-use T-Rule
  • There are micro-fine marking holes and slots at every 1/16-, 1/32
  • Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy
  • Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam has mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cutter can be easily resharpened by rubbing the flat surface on any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The gauge comes fitted with a cutter and two extra cutters are included. The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Can be widely used for classroom linup, floor marking, warehouse marking, pipe markers, social distancing warning sign, directional sign, school, business.
  • Easy to USE & REMOVE, everybody can install it in a few sample steps, peel & stick, when you remove it, no glue will remain on the surface;
  • Made of vinyl, reusable & removable gel, waterproof material, durable to use, it can be used on any flat surface, such as concrete, tile, carpet, wall, vinyl seat/table, window etc;
  • 3.5" diameter dot sticker, 200 PCS dots per roll;
  • Self adhesive vinyl dot shaped sticker tape;
  • Defines an exact line for starting a chisel or saw blade
  • Blade is beveled on one side only to keep the cut absolutely tight to your rule or square
  • This knife can draw a much finer line than an awl or pencil
  • Double beveled for both right and left hand Scribing
  • Blade length is 2.75" long and Beech handle is 4.125" long
  • Dual bevels each sharpened at 7 degrees for a super sharp and very thin blade
  • Blade is super thin at .075" thick and .380" wide
  • Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58
  • Marking/carving dovetail knife is manufactured by a highly respected tool maker in Czech Republic.

More Info

Mr. Pen- Wheel Marking Gauge, 2 Extra Blades, Marking Gauge, Marking Gauge Woodworking, Wood Scribe Tool, Marking Tool, Woodworking Gauges, Marking Guide, Marking Gauges for Woodworking, Wood Marking

Search only Mr. Pen brand name
Mr. Pen- Wheel Marking Gauge, 2 Extra Blades, Marking Gauge, Marking Gauge Woodworking, Wood Scribe Tool, Marking Tool, Woodworking Gauges, Marking Guide, Marking Gauges for Woodworking, Wood Marking

Current price: 14.25 USD


Check price and availability


  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Limited 1-year warranty
  • Locate your sharp pencil or scribe with absolute precision
  • Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-Inch scale position
  • Combination square for marking with perfect, instant accuracy
  • Precise, versatile and easy-to-use T-Rule
  • There are micro-fine marking holes and slots at every 1/16-, 1/32
  • Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy
  • Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam has mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cutter can be easily resharpened by rubbing the flat surface on any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The gauge comes fitted with a cutter and two extra cutters are included. The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Can be widely used for classroom linup, floor marking, warehouse marking, pipe markers, social distancing warning sign, directional sign, school, business.
  • Easy to USE & REMOVE, everybody can install it in a few sample steps, peel & stick, when you remove it, no glue will remain on the surface;
  • Made of vinyl, reusable & removable gel, waterproof material, durable to use, it can be used on any flat surface, such as concrete, tile, carpet, wall, vinyl seat/table, window etc;
  • 3.5" diameter dot sticker, 200 PCS dots per roll;
  • Self adhesive vinyl dot shaped sticker tape;
  • Defines an exact line for starting a chisel or saw blade
  • Blade is beveled on one side only to keep the cut absolutely tight to your rule or square
  • This knife can draw a much finer line than an awl or pencil
  • Double beveled for both right and left hand Scribing
  • Blade length is 2.75" long and Beech handle is 4.125" long
  • Dual bevels each sharpened at 7 degrees for a super sharp and very thin blade
  • Blade is super thin at .075" thick and .380" wide
  • Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58
  • Marking/carving dovetail knife is manufactured by a highly respected tool maker in Czech Republic.
  • 2-Stage Adjustments BodyEasy And Precise Adjustments - Quick Turn Of Knurled Adjustment Knob And Tail Help To Make Adjustments Faster And Easier.
  • 1.5 Inch Diameter Solid Brass Face Can Glides Against The Edge Of The Workpiece For Smooth Marking Aligned To Or Against The Wood Grains - Cutter Head Retraces Into Countersink In Head To Protect When Not In Use
  • The Laser Engraved Graduation Marks On The Bar Are Available In Both Metric And Imperial Versions Up To 6 Inch/150 mm
  • Wheel Marking Gauge Is A Indispensable Marking/Cutting Gadget Which Will Help You Lay Out Lines Parallel To A Flat Wood Surface With Max Precision And Indicate Exactly Where Wood Needs To Be Cut.
  • Includes: One Wheel Marking Gauge + Two Extra Blades

More Info

2 Oz - BLI101 - Aerosol Black Laser Ink for Metals Marking - CO2 Laser - Fiber Laser - YAG, 100% Satisfaction Guarantee, Durable, Permanent, High Contrast, Brilliance Laser Inks

Search only Brilliance Laser Inks brand name
2 Oz - BLI101 - Aerosol Black Laser Ink for Metals Marking - CO2 Laser - Fiber Laser - YAG, 100% Satisfaction Guarantee, Durable, Permanent, High Contrast, Brilliance Laser Inks

Current price: 26.95 USD


Check price and availability


  • Provides a flat to semi-gloss finish depending on porosity
  • Offers excellent adhesion to surfaces such as black top, concrete, grass and gravel; withstands short-term weathering
  • Dries to the touch in 15 minutes and covers up to 810 linear feet at 1.5" wide
  • Designed to spray upside-down for easy application and control; for best results, apply with Rust-Oleum Professional Marking Wand
  • Ideal for temporary marking of underground utilities, construction and excavation sites, traffic safety, athletic fields and more
  • Cautious: the blade is pointed; Remember to protect it when not in use to avoid accidental injury; However, due to the artificial cutting in the production process, some products may not be very peaked, you can grind the knife to solve the problem
  • Built to last: the marking knife blade is made from steel and comes pre-oiled for better strength and longevity; We recommend applying lubrication when uses (optional, not included); This dovetail marking knife comes peaked and can be additionally honed to make it more pointed
  • Wide use: the wood handle is sealed, and the blade is peaked; Dual bevel design is nice as it allows marking from either direction; This is a useful tool for a beginner's tool box, to learn how to use a marking knife for more serious woodwork
  • Size: the blade length is 2.4 cm/ 0.94 inches and the handle is 11.5 cm/ 4.53 inches long, the total length is 13.9 cm/ 5.47 inches, easy to hold on for you
  • Material: the blade of striking knife is made of manganese steel with faux mahogany handle, the knife edge is pointed and the handle is comfortable to hold, make it easy for you to use
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Limited 1-year warranty
  • Locate your sharp pencil or scribe with absolute precision
  • Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-Inch scale position
  • Combination square for marking with perfect, instant accuracy
  • Precise, versatile and easy-to-use T-Rule
  • There are micro-fine marking holes and slots at every 1/16-, 1/32
  • Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy
  • Precise, versatile, and easy-to-use are the words which best describe the Incra 12-Inch Precision Marking T-Rule
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam has mm and SAE graduations. Graduations allow easy setting of the gauge and extend to 150 mm or 6 inches.
  • The wheel cutter is 7/16 inch in diameter. The cutter can be easily resharpened by rubbing the flat surface on any sharpening media. Replacement cutter are also available.
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use.
  • The gauge comes fitted with a cutter and two extra cutters are included. The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain.
  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop.
  • Can be widely used for classroom linup, floor marking, warehouse marking, pipe markers, social distancing warning sign, directional sign, school, business.
  • Easy to USE & REMOVE, everybody can install it in a few sample steps, peel & stick, when you remove it, no glue will remain on the surface;
  • Made of vinyl, reusable & removable gel, waterproof material, durable to use, it can be used on any flat surface, such as concrete, tile, carpet, wall, vinyl seat/table, window etc;
  • 3.5" diameter dot sticker, 200 PCS dots per roll;
  • Self adhesive vinyl dot shaped sticker tape;
  • Defines an exact line for starting a chisel or saw blade
  • Blade is beveled on one side only to keep the cut absolutely tight to your rule or square
  • This knife can draw a much finer line than an awl or pencil
  • Double beveled for both right and left hand Scribing
  • Blade length is 2.75" long and Beech handle is 4.125" long
  • Dual bevels each sharpened at 7 degrees for a super sharp and very thin blade
  • Blade is super thin at .075" thick and .380" wide
  • Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58
  • Marking/carving dovetail knife is manufactured by a highly respected tool maker in Czech Republic.
  • 2-Stage Adjustments BodyEasy And Precise Adjustments - Quick Turn Of Knurled Adjustment Knob And Tail Help To Make Adjustments Faster And Easier.
  • 1.5 Inch Diameter Solid Brass Face Can Glides Against The Edge Of The Workpiece For Smooth Marking Aligned To Or Against The Wood Grains - Cutter Head Retraces Into Countersink In Head To Protect When Not In Use
  • The Laser Engraved Graduation Marks On The Bar Are Available In Both Metric And Imperial Versions Up To 6 Inch/150 mm
  • Wheel Marking Gauge Is A Indispensable Marking/Cutting Gadget Which Will Help You Lay Out Lines Parallel To A Flat Wood Surface With Max Precision And Indicate Exactly Where Wood Needs To Be Cut.
  • Includes: One Wheel Marking Gauge + Two Extra Blades
  • Low watt Diode Lasers are not recommended.
  • Spray, Dry and Mark. HIGH CONTRAST, Durable and PERMANENT MARKETING/Logos. Laser on variety of different metals. Quick and Easy to Use.
  • FIBER LASER - 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch)
  • CO2 LASER - 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI)
  • 100% TESTED - for durability, permanency and dark black marking. Tech Support provided on all orders.

More Info

1    2    3    4    5    6    7    8    9    10