Best Medical Extractors. Reviews September, 2020

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station

Search only Fstop Labs brand name
KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station

Current price: 34.99 USD


Check price and availability


  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station

More Info

YaeTek Adjustable Solder Smoke Absorber Remover Bench Top Fume Extractor Carbon Filter Quiet Exhaust Fan for Soldering Station ESD-Safe 1000l/min

Search only YaeTek brand name
YaeTek Adjustable Solder Smoke Absorber Remover Bench Top Fume Extractor Carbon Filter Quiet Exhaust Fan for Soldering Station ESD-Safe 1000l/min

Current price: 29.99 USD


Check price and availability


  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz

More Info

KOTTO Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction

Search only KOTTO brand name
KOTTO Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction

Current price: 79.99 USD


Check price and availability


  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz
  • US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.

More Info

Soldering Smoke / Fume Extractor Absorber, ESD, Articulated Arm, 110 V, with spare filter

Search only Zhongdi brand name
Soldering Smoke / Fume Extractor Absorber, ESD, Articulated Arm, 110 V, with spare filter

Current price: 34.95 USD


Check price and availability


  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz
  • US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
  • Capacity: 1 cubic meter/min
  • Depth: 17 cm
  • Height: 27 cm
  • Power: 23 W
  • Voltage: 110 V

More Info

BAOSHISHAN Fume Extractor Solder Smoke Absorber Soldering Fume Remover with Benchtop Clamp, LED Lamp for DIY Welding Work ESD Soldering Work

Search only BAOSHISHAN brand name
BAOSHISHAN Fume Extractor Solder Smoke Absorber Soldering Fume Remover with Benchtop Clamp, LED Lamp for DIY Welding Work ESD Soldering Work

Current price: 126 USD


Check price and availability


Weight: 4.40924524 Pounds

  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz
  • US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
  • Capacity: 1 cubic meter/min
  • Depth: 17 cm
  • Height: 27 cm
  • Power: 23 W
  • Voltage: 110 V
  • ⭕ [APPLICATION]-- ESD welding station work, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, Television maintenance, Factory, etc.
  • ⭕ [ADJUSTABLE SUCTION]-- The suction strength can be adjusted by Fan Switch. It controls the fan in the exhaust box, which can draw in the smoke generated during welding through the exhaust pipe and then discharge it away from the operation desktop.
  • ⭕ [SUPPORT FIXTURE]-- The combination of long smoke exhaust hose (2m) and flexible support assistant can make your welding work more freely. In addition, the fixing clip can be clamped on the operation desktop to provide more solid support.
  • ⭕ [LED LAMP]-- The pipe mouth of the smoker is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering some electronic components. At the same time, you can adjust the brightness of the light by turning on the knob.
  • ⭕ [PARAMETER]-- Working Voltage: AC 100V-240V | Power: 30W | Length of Exhaust Tube:2.0m/78in. | Net Weight: 2.0kg | Effective Exhaust Distance: <6cm / 2.4in. | No Filtering Function

More Info

Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber Fan Quiet Working Fan with Adjustable Table Clamp for ESD Soldering Station Work, Eliminate Toxic Fumes helpful for Health

Search only Kulannder brand name
Adjustable Solder Smoke/Fume Absorber, Remove Fume Extractor Absorber Fan Quiet Working Fan with Adjustable Table Clamp for ESD Soldering Station Work, Eliminate Toxic Fumes helpful for Health

Current price: 35.99 USD


Check price and availability


  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz
  • US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
  • Capacity: 1 cubic meter/min
  • Depth: 17 cm
  • Height: 27 cm
  • Power: 23 W
  • Voltage: 110 V
  • ⭕ [APPLICATION]-- ESD welding station work, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, Television maintenance, Factory, etc.
  • ⭕ [ADJUSTABLE SUCTION]-- The suction strength can be adjusted by Fan Switch. It controls the fan in the exhaust box, which can draw in the smoke generated during welding through the exhaust pipe and then discharge it away from the operation desktop.
  • ⭕ [SUPPORT FIXTURE]-- The combination of long smoke exhaust hose (2m) and flexible support assistant can make your welding work more freely. In addition, the fixing clip can be clamped on the operation desktop to provide more solid support.
  • ⭕ [LED LAMP]-- The pipe mouth of the smoker is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering some electronic components. At the same time, you can adjust the brightness of the light by turning on the knob.
  • ⭕ [PARAMETER]-- Working Voltage: AC 100V-240V | Power: 30W | Length of Exhaust Tube:2.0m/78in. | Net Weight: 2.0kg | Effective Exhaust Distance: <6cm / 2.4in. | No Filtering Function
  • ESD safe, great for electronics, arts and crafts, soldering station work.
  • Portable and low noise, quiet and high-efficient fan.
  • Super easy to set up and easy to replace filter.
  • Sturdy Aluminium alloy material and long-lasting working time.
  • The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.

More Info

Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber

Search only Hakko brand name
Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber

Current price: 73.88 USD


Check price and availability


Height: 6.7 Inches

Length: 10.1 Inches

Width: 9 Inches

Weight: 3 Pounds

  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz
  • US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
  • Capacity: 1 cubic meter/min
  • Depth: 17 cm
  • Height: 27 cm
  • Power: 23 W
  • Voltage: 110 V
  • ⭕ [APPLICATION]-- ESD welding station work, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, Television maintenance, Factory, etc.
  • ⭕ [ADJUSTABLE SUCTION]-- The suction strength can be adjusted by Fan Switch. It controls the fan in the exhaust box, which can draw in the smoke generated during welding through the exhaust pipe and then discharge it away from the operation desktop.
  • ⭕ [SUPPORT FIXTURE]-- The combination of long smoke exhaust hose (2m) and flexible support assistant can make your welding work more freely. In addition, the fixing clip can be clamped on the operation desktop to provide more solid support.
  • ⭕ [LED LAMP]-- The pipe mouth of the smoker is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering some electronic components. At the same time, you can adjust the brightness of the light by turning on the knob.
  • ⭕ [PARAMETER]-- Working Voltage: AC 100V-240V | Power: 30W | Length of Exhaust Tube:2.0m/78in. | Net Weight: 2.0kg | Effective Exhaust Distance: <6cm / 2.4in. | No Filtering Function
  • ESD safe, great for electronics, arts and crafts, soldering station work.
  • Portable and low noise, quiet and high-efficient fan.
  • Super easy to set up and easy to replace filter.
  • Sturdy Aluminium alloy material and long-lasting working time.
  • The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.
  • Quick and easy filter replacement
  • Activated Carbon filter contains over 8g of highly activated carbon
  • ESD-safe by design and is made of ESD-safe materials
  • Low profile position provides approximately 2-1/2 times the airflow and efficiency
  • Can be operated standing up or laying down in a low-profile position

More Info

Primacare VE-5444 Venom Extractor Kit

Search only Primacare brand name
Primacare VE-5444 Venom Extractor Kit

Current price: 14.21 USD


Check price and availability


Weight: 0.04 Pounds

  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz
  • US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
  • Capacity: 1 cubic meter/min
  • Depth: 17 cm
  • Height: 27 cm
  • Power: 23 W
  • Voltage: 110 V
  • ⭕ [APPLICATION]-- ESD welding station work, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, Television maintenance, Factory, etc.
  • ⭕ [ADJUSTABLE SUCTION]-- The suction strength can be adjusted by Fan Switch. It controls the fan in the exhaust box, which can draw in the smoke generated during welding through the exhaust pipe and then discharge it away from the operation desktop.
  • ⭕ [SUPPORT FIXTURE]-- The combination of long smoke exhaust hose (2m) and flexible support assistant can make your welding work more freely. In addition, the fixing clip can be clamped on the operation desktop to provide more solid support.
  • ⭕ [LED LAMP]-- The pipe mouth of the smoker is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering some electronic components. At the same time, you can adjust the brightness of the light by turning on the knob.
  • ⭕ [PARAMETER]-- Working Voltage: AC 100V-240V | Power: 30W | Length of Exhaust Tube:2.0m/78in. | Net Weight: 2.0kg | Effective Exhaust Distance: <6cm / 2.4in. | No Filtering Function
  • ESD safe, great for electronics, arts and crafts, soldering station work.
  • Portable and low noise, quiet and high-efficient fan.
  • Super easy to set up and easy to replace filter.
  • Sturdy Aluminium alloy material and long-lasting working time.
  • The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.
  • Quick and easy filter replacement
  • Activated Carbon filter contains over 8g of highly activated carbon
  • ESD-safe by design and is made of ESD-safe materials
  • Low profile position provides approximately 2-1/2 times the airflow and efficiency
  • Can be operated standing up or laying down in a low-profile position
  • Includes Tourniquet, Alcohol Preparation Pad Providine-iodine
  • One Hand Operation
  • Strong Suction
  • Compact and Portable

More Info

Hakko CHP PLCC-32 PLCC Socket Extractor, 32 Pin, ESD-Safe

Search only Hakko brand name
Hakko CHP PLCC-32 PLCC Socket Extractor, 32 Pin, ESD-Safe

Current price: 43.37 USD


Check price and availability


  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz
  • US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
  • Capacity: 1 cubic meter/min
  • Depth: 17 cm
  • Height: 27 cm
  • Power: 23 W
  • Voltage: 110 V
  • ⭕ [APPLICATION]-- ESD welding station work, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, Television maintenance, Factory, etc.
  • ⭕ [ADJUSTABLE SUCTION]-- The suction strength can be adjusted by Fan Switch. It controls the fan in the exhaust box, which can draw in the smoke generated during welding through the exhaust pipe and then discharge it away from the operation desktop.
  • ⭕ [SUPPORT FIXTURE]-- The combination of long smoke exhaust hose (2m) and flexible support assistant can make your welding work more freely. In addition, the fixing clip can be clamped on the operation desktop to provide more solid support.
  • ⭕ [LED LAMP]-- The pipe mouth of the smoker is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering some electronic components. At the same time, you can adjust the brightness of the light by turning on the knob.
  • ⭕ [PARAMETER]-- Working Voltage: AC 100V-240V | Power: 30W | Length of Exhaust Tube:2.0m/78in. | Net Weight: 2.0kg | Effective Exhaust Distance: <6cm / 2.4in. | No Filtering Function
  • ESD safe, great for electronics, arts and crafts, soldering station work.
  • Portable and low noise, quiet and high-efficient fan.
  • Super easy to set up and easy to replace filter.
  • Sturdy Aluminium alloy material and long-lasting working time.
  • The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.
  • Quick and easy filter replacement
  • Activated Carbon filter contains over 8g of highly activated carbon
  • ESD-safe by design and is made of ESD-safe materials
  • Low profile position provides approximately 2-1/2 times the airflow and efficiency
  • Can be operated standing up or laying down in a low-profile position
  • Includes Tourniquet, Alcohol Preparation Pad Providine-iodine
  • One Hand Operation
  • Strong Suction
  • Compact and Portable
  • Jaws apply even force to prevent damage during removal
  • ESD-safe material construction prevents electrostatic charge build-up
  • Component extractor removes 32-pin PLCC-type integrated circuits from the socket

More Info

Sawyer Products Venom Extractor & Suction Pump Kit for Snake Bite, Bee, Wasp, and Mosquito Stings

Search only Sawyer Products brand name
Sawyer Products Venom Extractor & Suction Pump Kit for Snake Bite, Bee, Wasp, and Mosquito Stings

Current price: 14.97 USD

Saving: $3.02 (17%)


Check price and availability


Height: 6 Inches

Length: 6.5 Inches

Width: 1.5 Inches

Weight: 0.23 Pounds

Warranty: Manufacturer Limited Warranty

  • US based customer support, 30 days full satisfaction no question asked return period.
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V, 30W (50 / 60Hz).
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
  • High- efficient absorb toxic gases Smoke, sodering fumes, flux smoke, odor to provides a safe working condition.
  • Activated absorbing angle,
  • Size of Carbon filer : 5.1 inch * 5.1 inch * 0.4 inch
  • Material: antistatic material,The filter consists of foam and activated carbon
  • Power supply: AC120, 60Hz
  • US-based customer support, 30 days full satisfaction no question asked return period. Replacement filters: https://www.amazon.com/dp/B07WG24L8Z/ - Assembly Instructions: https://youtu.be/-EW8sMxegnw.
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃~60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply).
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O.
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
  • Capacity: 1 cubic meter/min
  • Depth: 17 cm
  • Height: 27 cm
  • Power: 23 W
  • Voltage: 110 V
  • ⭕ [APPLICATION]-- ESD welding station work, DIY process, Maintenance of electronic products, Smart phone maintenance, Computer maintenance, Television maintenance, Factory, etc.
  • ⭕ [ADJUSTABLE SUCTION]-- The suction strength can be adjusted by Fan Switch. It controls the fan in the exhaust box, which can draw in the smoke generated during welding through the exhaust pipe and then discharge it away from the operation desktop.
  • ⭕ [SUPPORT FIXTURE]-- The combination of long smoke exhaust hose (2m) and flexible support assistant can make your welding work more freely. In addition, the fixing clip can be clamped on the operation desktop to provide more solid support.
  • ⭕ [LED LAMP]-- The pipe mouth of the smoker is equipped with a ring mounted LED lamp, which can provide absolute illumination when soldering some electronic components. At the same time, you can adjust the brightness of the light by turning on the knob.
  • ⭕ [PARAMETER]-- Working Voltage: AC 100V-240V | Power: 30W | Length of Exhaust Tube:2.0m/78in. | Net Weight: 2.0kg | Effective Exhaust Distance: <6cm / 2.4in. | No Filtering Function
  • ESD safe, great for electronics, arts and crafts, soldering station work.
  • Portable and low noise, quiet and high-efficient fan.
  • Super easy to set up and easy to replace filter.
  • Sturdy Aluminium alloy material and long-lasting working time.
  • The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.
  • Quick and easy filter replacement
  • Activated Carbon filter contains over 8g of highly activated carbon
  • ESD-safe by design and is made of ESD-safe materials
  • Low profile position provides approximately 2-1/2 times the airflow and efficiency
  • Can be operated standing up or laying down in a low-profile position
  • Includes Tourniquet, Alcohol Preparation Pad Providine-iodine
  • One Hand Operation
  • Strong Suction
  • Compact and Portable
  • Jaws apply even force to prevent damage during removal
  • ESD-safe material construction prevents electrostatic charge build-up
  • Component extractor removes 32-pin PLCC-type integrated circuits from the socket
  • Extractor most effectively retrieves venom from extremities and areas of body outside muscle areas; effectiveness varies with the location of the bite
  • Kit includes Extractor pump, alcohol prep pads, adhesive bandages, sting care wipes, razor (for hair removal), and instruction manual
  • Eliminates the need to use dangerous scalpel blades or knives associated with less effective bite kits
  • Four sizes of plastic cups for use and effective suction on a variety of sting or bite sizes; pump is easy to use with one hand
  • Small, reusable vacuum pump helps remove poisons below your skin in one quick motion; use for snake bites, bee/wasp stings, mosquito bites, and more

More Info

1    2    3    4    5    6    7    8    9    10