Best Metal Cutting . Reviews August, 2020

Cutting Wheel 50 PCS Cut Off Wheel 4.5"x.040"x7/8" Cutting Disc Ultra Thin Metal & Stainless Steel SATC

Search only S SATC brand name
Cutting Wheel 50 PCS Cut Off Wheel 4.5

Current price: 26.99 USD


Check price and availability


  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.

More Info

Product Name: Lotos LT3500 35Amp Air Plasma Cutter, 2/5 Inch Clean Cut, 110V/120V Input with Pre Installed NPT Quick Connector, Portable

Search only LOTOS brand name
Product Name: Lotos LT3500 35Amp Air Plasma Cutter, 2/5 Inch Clean Cut, 110V/120V Input with Pre Installed NPT Quick Connector, Portable

Current price: 189 USD

Saving: $50.00 (21%)


Check price and availability


Height: 9 Inches

Length: 14 Inches

Width: 5.5 Inches

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.

More Info

Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear

Search only Genesis brand name
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear

Current price: 53.79 USD

Saving: $6.20 (10%)


Check price and availability


Height: 9.25 Inches

Length: 11.5 Inches

Width: 2.75 Inches

Weight: 5.4 Pounds

Warranty: 2 Year

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
  • Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
  • 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
  • Powerful 4.0 amp motor
  • Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!

More Info

M18 Fuel Metal Cutting Circular Saw (Bare Tool)

Search only MILWAUKEE ELECTRIC TOOLS CORP brand name
M18 Fuel Metal Cutting Circular Saw (Bare Tool)

Current price: 156.94 USD


Check price and availability


Height: 7 Inches

Length: 14 Inches

Width: 7 Inches

Weight: 4.9 Pounds

Warranty: 5 Year Tool Warranty

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
  • Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
  • 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
  • Powerful 4.0 amp motor
  • Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
  • Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops
  • M18 Redlithium batteries deliver up to 370 cuts in 3/4" Emt for all day Work
  • Brushless motor has no Wearable components delivering longest tool life
  • Brushless motor with 3900 RPMs delivers the fastest cutting metal cutting Saw

More Info

Double Head Sheet Metal Cutter, Versatile Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel, Perfect for Home DIY and Car Repair

Search only Dicfeos brand name
Double Head Sheet Metal Cutter, Versatile Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel, Perfect for Home DIY and Car Repair

Current price: 37.99 USD


Check price and availability


Height: 1.97 Inches

Length: 5.1 Inches

Width: 3.2 Inches

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
  • Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
  • 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
  • Powerful 4.0 amp motor
  • Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
  • Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops
  • M18 Redlithium batteries deliver up to 370 cuts in 3/4" Emt for all day Work
  • Brushless motor has no Wearable components delivering longest tool life
  • Brushless motor with 3900 RPMs delivers the fastest cutting metal cutting Saw
  • Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
  • HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
  • 360 degree double cutting head to cut straight line, curve line and circles
  • Easy and fast to cut 14 gauge material and creates a precision, burr free edge

More Info

Makita 10 Pack - 4.5" Cut Off Wheels For Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2" x .045 x 7/8-Inch

Search only Makita brand name
Makita 10 Pack - 4.5

Current price: 19.99 USD

Saving: $3.00 (13%)


Check price and availability


Height: 4.5 Inches

Length: 4.5 Inches

Width: 0.05 Inches

Weight: 0.05 Pounds

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
  • Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
  • 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
  • Powerful 4.0 amp motor
  • Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
  • Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops
  • M18 Redlithium batteries deliver up to 370 cuts in 3/4" Emt for all day Work
  • Brushless motor has no Wearable components delivering longest tool life
  • Brushless motor with 3900 RPMs delivers the fastest cutting metal cutting Saw
  • Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
  • HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
  • 360 degree double cutting head to cut straight line, curve line and circles
  • Easy and fast to cut 14 gauge material and creates a precision, burr free edge
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders

More Info

WEN 3970T 4-inch x 6-inch Metal-Cutting Band Saw with Stand

Search only WEN brand name
WEN 3970T 4-inch x 6-inch Metal-Cutting Band Saw with Stand

Current price: 393.2 USD


Check price and availability


Height: 38 Inches

Length: 16.5 Inches

Width: 36 Inches

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
  • Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
  • 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
  • Powerful 4.0 amp motor
  • Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
  • Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops
  • M18 Redlithium batteries deliver up to 370 cuts in 3/4" Emt for all day Work
  • Brushless motor has no Wearable components delivering longest tool life
  • Brushless motor with 3900 RPMs delivers the fastest cutting metal cutting Saw
  • Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
  • HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
  • 360 degree double cutting head to cut straight line, curve line and circles
  • Easy and fast to cut 14 gauge material and creates a precision, burr free edge
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
  • Beveling vise helps create cuts anywhere from 0° to 60°
  • Adjust the blade speed to 80, 120 or 200 feet per minute for compatibility with a variety of metals
  • Capable of operating in both vertical and horizontal positions
  • Automatic shut-off turns the band saw off after a cut has been completed

More Info

Makita LC1230 12" Metal Cutting Saw

Search only Makita brand name
Makita LC1230 12

Current price: 453.29 USD


Check price and availability


Height: 17.32 Inches

Length: 13.78 Inches

Width: 22.56 Inches

Weight: 42.5 Pounds

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
  • Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
  • 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
  • Powerful 4.0 amp motor
  • Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
  • Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops
  • M18 Redlithium batteries deliver up to 370 cuts in 3/4" Emt for all day Work
  • Brushless motor has no Wearable components delivering longest tool life
  • Brushless motor with 3900 RPMs delivers the fastest cutting metal cutting Saw
  • Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
  • HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
  • 360 degree double cutting head to cut straight line, curve line and circles
  • Easy and fast to cut 14 gauge material and creates a precision, burr free edge
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
  • Beveling vise helps create cuts anywhere from 0° to 60°
  • Adjust the blade speed to 80, 120 or 200 feet per minute for compatibility with a variety of metals
  • Capable of operating in both vertical and horizontal positions
  • Automatic shut-off turns the band saw off after a cut has been completed
  • Lock-off button prevents accidental starting
  • Long lasting carbide tipped blade for cost efficient, clean and accurate cutting; virtually burr free
  • D-shape handle for easy gripping
  • Powerful 15 amp motor @ 120 volts. Quick release support fence adjusts 0-45° for miter cutting. Maximum cutting depth of 4-1/2 inch with carbide tipped blade
  • 4 x faster cutting in light pipe, angle iron, tubing, conduit and channel than abrasive cut-off saws

More Info

Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

Search only Malco brand name
Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

Current price: 46.77 USD

Saving: $6.40 (12%)


Check price and availability


Height: 1 Inches

Length: 8 Inches

Width: 4 Inches

Weight: 1 Pounds

Warranty: 1 Year

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
  • Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
  • 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
  • Powerful 4.0 amp motor
  • Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
  • Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops
  • M18 Redlithium batteries deliver up to 370 cuts in 3/4" Emt for all day Work
  • Brushless motor has no Wearable components delivering longest tool life
  • Brushless motor with 3900 RPMs delivers the fastest cutting metal cutting Saw
  • Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
  • HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
  • 360 degree double cutting head to cut straight line, curve line and circles
  • Easy and fast to cut 14 gauge material and creates a precision, burr free edge
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
  • Beveling vise helps create cuts anywhere from 0° to 60°
  • Adjust the blade speed to 80, 120 or 200 feet per minute for compatibility with a variety of metals
  • Capable of operating in both vertical and horizontal positions
  • Automatic shut-off turns the band saw off after a cut has been completed
  • Lock-off button prevents accidental starting
  • Long lasting carbide tipped blade for cost efficient, clean and accurate cutting; virtually burr free
  • D-shape handle for easy gripping
  • Powerful 15 amp motor @ 120 volts. Quick release support fence adjusts 0-45° for miter cutting. Maximum cutting depth of 4-1/2 inch with carbide tipped blade
  • 4 x faster cutting in light pipe, angle iron, tubing, conduit and channel than abrasive cut-off saws
  • Made in the USA
  • TSDC Drill Clamp can be purchased separately
  • Navigates tight patterns and square cuts
  • 20 gauge capacity in galvanized steel
  • Inserts into chuck of an A/C or cordless drill
  • Turns your power drill into a power shear

More Info

Slugger by FEIN MCCS14 Metal Cutting Saw, 14" Blade Diameter

Search only Jancy brand name
Slugger by FEIN MCCS14 Metal Cutting Saw, 14

Current price: 499 USD

Saving: $80.99 (14%)


Check price and availability


Weight: 54 Pounds

Warranty: Limited

  • 【SAFETY】Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
  • 【APPLICATIONS】These cutting discs are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals.
  • 【MATERIAL】Proprietary aluminum oxide grain combination for aggressive cutting action.
  • 【SIZE】Each disc is four and a half (4.5) inches in diameter with a 7/8" metal center and 0.040" thickness.
  • 【50 PACK】This is for a pack of fifty (50) pieces of our cutting wheels.
  • ★ SATISFACTION GUARANTEED--with confidence, as we offer 30-days refund/replacement and 1 year warranty. ★ FEEL FREE TO CONTACT US--our customer Care team is always ready to help. Naturally, we hope you don't encounter any problems, but when they crop up, our customer support is there to help! we will provide the Best solution for you.
  • ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • Three blade cutting system reduces metal deformation | experience smooth cuts EVERYTIME!
  • Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
  • 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
  • Powerful 4.0 amp motor
  • Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
  • Integrated hang hook allows tool to hang on ladders and common building materials reducing damage due to drops
  • M18 Redlithium batteries deliver up to 370 cuts in 3/4" Emt for all day Work
  • Brushless motor has no Wearable components delivering longest tool life
  • Brushless motor with 3900 RPMs delivers the fastest cutting metal cutting Saw
  • Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
  • HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
  • 360 degree double cutting head to cut straight line, curve line and circles
  • Easy and fast to cut 14 gauge material and creates a precision, burr free edge
  • ✅ DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix
  • ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
  • ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders
  • Beveling vise helps create cuts anywhere from 0° to 60°
  • Adjust the blade speed to 80, 120 or 200 feet per minute for compatibility with a variety of metals
  • Capable of operating in both vertical and horizontal positions
  • Automatic shut-off turns the band saw off after a cut has been completed
  • Lock-off button prevents accidental starting
  • Long lasting carbide tipped blade for cost efficient, clean and accurate cutting; virtually burr free
  • D-shape handle for easy gripping
  • Powerful 15 amp motor @ 120 volts. Quick release support fence adjusts 0-45° for miter cutting. Maximum cutting depth of 4-1/2 inch with carbide tipped blade
  • 4 x faster cutting in light pipe, angle iron, tubing, conduit and channel than abrasive cut-off saws
  • Made in the USA
  • TSDC Drill Clamp can be purchased separately
  • Navigates tight patterns and square cuts
  • 20 gauge capacity in galvanized steel
  • Inserts into chuck of an A/C or cordless drill
  • Turns your power drill into a power shear
  • 14-inches Blade diameter
  • Heavy duty base; use Slugger blades to optimize results
  • Cuts 0-45 degrees
  • Powerful 2200 watt motor
  • Low speed, high torque motor

More Info

1    2    3    4    5    6    7    8    9    10