Best Mono Amplifiers. Reviews August, 2020

Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier,BLACK

Search only Rockford Fosgate brand name
Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier,BLACK

Current price: 149 USD

Saving: $60.99 (29%)


Check price and availability


Height: 1.9 Inches

Length: 8.5 Inches

Width: 6.7 Inches

Weight: 5.0926782522 Pounds

  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB

More Info

Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W

Search only Skar Audio brand name
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W

Current price: 169.99 USD


Check price and availability


Height: 2.5 Inches

Length: 16 Inches

Width: 6 Inches

Weight: 7.2 Pounds

Warranty: 2 year limited warranty

  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150

More Info

Nobsound G2 Subwoofer Amplifier Mono Power Amp PBTL/BTL Bridge 100W Mini Sub Amp Home Theater

Search only Douk Audio brand name
Nobsound G2 Subwoofer Amplifier Mono Power Amp PBTL/BTL Bridge 100W Mini Sub Amp Home Theater

Current price: 59.99 USD


Check price and availability


  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.

More Info

Taramp's HD 3000 2 Ohms Class D Full Range Mono Amplifier

Search only Taramp's brand name
Taramp's HD 3000 2 Ohms Class D Full Range Mono Amplifier

Current price: 215 USD


Check price and availability


Height: 5 Inches

Length: 5 Inches

Width: 5 Inches

Weight: 4.960400895 Pounds

Warranty: Authorized repair center in the usa!

  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
  • Bass boost
  • Mono
  • 3000 watts
  • 2 ohms
  • Excellent for voice as well as bass

More Info

Taramps Smart 3 1~2 Ohms 3000 Watts Class D Mono Amplifier

Search only Taramp's brand name
Taramps Smart 3 1~2 Ohms 3000 Watts Class D Mono Amplifier

Current price: 279 USD


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 5.72 Pounds

Warranty: -

  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
  • Bass boost
  • Mono
  • 3000 watts
  • 2 ohms
  • Excellent for voice as well as bass
  • It is designed to provide high performance with optimal power and sound quality aimed at the international music market

More Info

KICKER CX400.1 400 Watt Class D Mono Amplifier for Car Audio Speakers, Black

Search only KICKER brand name
KICKER CX400.1 400 Watt Class D Mono Amplifier for Car Audio Speakers, Black

Current price: 149.95 USD


Check price and availability


  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
  • Bass boost
  • Mono
  • 3000 watts
  • 2 ohms
  • Excellent for voice as well as bass
  • It is designed to provide high performance with optimal power and sound quality aimed at the international music market
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car

More Info

Kenwood KAC-D5101 1000 Watts Max Power Class D Mono Amplifier 2 Ohms RMS 500x1 Stable with Gravity Magnet Phone Holder Bundle

Search only Kenwood brand name
Kenwood KAC-D5101 1000 Watts Max Power Class D Mono Amplifier 2 Ohms RMS 500x1 Stable with Gravity Magnet Phone Holder Bundle

Current price: 134.99 USD


Check price and availability


Height: 14 Inches

Length: 4 Inches

Width: 9 Inches

Weight: 4.6 Pounds

Warranty: N/A

  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
  • Bass boost
  • Mono
  • 3000 watts
  • 2 ohms
  • Excellent for voice as well as bass
  • It is designed to provide high performance with optimal power and sound quality aimed at the international music market
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Dimensions: 6-11/16"W x 2-3/16"H x 7-3/8"D
  • Speaker level input | signal sensing turn-on
  • Peak Power output: 1000 watts
  • Rms power rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel
  • Class-d Monoblock 4-Ohm amplifier

More Info

Rockford Fosgate R2-500X1 500-Watt Mono Amplifier

Search only Rockford Fosgate brand name
Rockford Fosgate R2-500X1 500-Watt Mono Amplifier

Current price: 219.99 USD


Check price and availability


Weight: 4.38 Pounds

  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
  • Bass boost
  • Mono
  • 3000 watts
  • 2 ohms
  • Excellent for voice as well as bass
  • It is designed to provide high performance with optimal power and sound quality aimed at the international music market
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Dimensions: 6-11/16"W x 2-3/16"H x 7-3/8"D
  • Speaker level input | signal sensing turn-on
  • Peak Power output: 1000 watts
  • Rms power rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel
  • Class-d Monoblock 4-Ohm amplifier
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
  • Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
  • Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
  • Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
  • The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power

More Info

Taramp's MD 5000.1 2 Ohms 5000 Watts Class D Full Range Mono Amplifier

Search only Taramp's brand name
Taramp's MD 5000.1 2 Ohms 5000 Watts Class D Full Range Mono Amplifier

Current price: 408 USD


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

Weight: 0.0093035074564 Pounds

Warranty: -

  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
  • Bass boost
  • Mono
  • 3000 watts
  • 2 ohms
  • Excellent for voice as well as bass
  • It is designed to provide high performance with optimal power and sound quality aimed at the international music market
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Dimensions: 6-11/16"W x 2-3/16"H x 7-3/8"D
  • Speaker level input | signal sensing turn-on
  • Peak Power output: 1000 watts
  • Rms power rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel
  • Class-d Monoblock 4-Ohm amplifier
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
  • Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
  • Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
  • Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
  • The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
  • This full range mono amplifier's max power is 5000W with 2 Ohm impedance.

More Info

Taramp's HD 3000 1 Ohm Class D Full Range Mono Amplifier

Search only Taramp's brand name
Taramp's HD 3000 1 Ohm Class D Full Range Mono Amplifier

Current price: 216 USD


Check price and availability


Height: 2.55905 Inches

Length: 11.33856 Inches

Width: 9.01573 Inches

Weight: 2 Pounds

Warranty: Authorized repair center in the usa!

  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • On-board Punch EQ with +18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz +/-1dB
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • 18-month warranty. Prompt and courteous customer service. For any questions you have, please feel free to contact us.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
  • Bass boost
  • Mono
  • 3000 watts
  • 2 ohms
  • Excellent for voice as well as bass
  • It is designed to provide high performance with optimal power and sound quality aimed at the international music market
  • 24 dB subsonic protects the speaker from any potentially damaging frequencies
  • KickEQ 6 dB variable bass boost for any low frequencies you run into
  • Variable 12 dB crossovers let you control the dial to optimize your sound
  • Features a three-second on/off delay to eliminate unwanted interference
  • CX-Series Mono is an efficient Class-D amplifier for your car
  • Dimensions: 6-11/16"W x 2-3/16"H x 7-3/8"D
  • Speaker level input | signal sensing turn-on
  • Peak Power output: 1000 watts
  • Rms power rating: 4 ohms: 300 watts x 1 channel 2 ohms: 500 watts x 1 channel
  • Class-d Monoblock 4-Ohm amplifier
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
  • Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music
  • Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
  • Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω)
  • The R2-500X1 full-range class-D mono amplifier (1.9" x 6.8" x 8.5") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
  • This full range mono amplifier's max power is 5000W with 2 Ohm impedance.
  • Bass boost
  • Mono
  • 3000 watts
  • 1 ohm
  • Excellent for voice as well as bass

More Info

1    2    3    4    5    6    7    8    9    10