Best Panel Nuts. Reviews August, 2020

Panel Nut 3/8-32 Thread 1/2" Hex Brass Nickel Pack of 50

Search only Primeonly27 brand name
Panel Nut 3/8-32 Thread 1/2

Current price: 12.59 USD


Check price and availability


  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50

More Info

Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, Metric, M6-1 Thread Size, For 0.8 mm-4 mm Material Thickness, 12 mm Edge Distance (Pack of 25)

Search only Small Parts brand name
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, Metric, M6-1 Thread Size, For 0.8 mm-4 mm Material Thickness, 12 mm Edge Distance (Pack of 25)

Current price: 8.92 USD


Check price and availability


Weight: 0.35 Pounds

  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold

More Info

3 Packs Power Wing Nut Driver Set, Slot Wing Nuts Drill Bit Socket Wrenches Tools Set, 1/4 Inch Hex Shank Steel Drills Bits for Panel Nuts Screws Eye C Hook Bolt

Search only Honoson brand name
3 Packs Power Wing Nut Driver Set, Slot Wing Nuts Drill Bit Socket Wrenches Tools Set, 1/4 Inch Hex Shank Steel Drills Bits for Panel Nuts Screws Eye C Hook Bolt

Current price: 8.99 USD


Check price and availability


Height: 0.787401574 Inches

Length: 5.905511805 Inches

Width: 3.149606296 Inches

  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low
  • Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life
  • Suitable size design: this wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank); The total length of the tool is about 6.55 cm/ 2.6 inch, the outer diameter of the socket is about 17.8 mm/ 0.7 inch, and the slots on the drill bit tool is 4 mm/ 1.55 inch wide
  • Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace
  • Practical design: up to 5x faster than you can by hand, this wing nut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster

More Info

Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, Metric, M6-1 Thread Size, For 3.4 mm-6.3 mm Material Thickness, 13.5 mm Edge Distance (Pack of 25)

Search only Small Parts brand name
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, Metric, M6-1 Thread Size, For 3.4 mm-6.3 mm Material Thickness, 13.5 mm Edge Distance (Pack of 25)

Current price: 13.94 USD


Check price and availability


Weight: 0.35 Pounds

  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low
  • Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life
  • Suitable size design: this wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank); The total length of the tool is about 6.55 cm/ 2.6 inch, the outer diameter of the socket is about 17.8 mm/ 0.7 inch, and the slots on the drill bit tool is 4 mm/ 1.55 inch wide
  • Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace
  • Practical design: up to 5x faster than you can by hand, this wing nut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold

More Info

HighWind Solutions 1/4-20 Wide Washered Wing Nut for Hurricane Panels/Shutters by Mountwell Hardware (25 Pieces)

Search only Mountwell Hardware brand name
HighWind Solutions 1/4-20 Wide Washered Wing Nut for Hurricane Panels/Shutters by Mountwell Hardware (25 Pieces)

Current price: 13.49 USD


Check price and availability


  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low
  • Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life
  • Suitable size design: this wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank); The total length of the tool is about 6.55 cm/ 2.6 inch, the outer diameter of the socket is about 17.8 mm/ 0.7 inch, and the slots on the drill bit tool is 4 mm/ 1.55 inch wide
  • Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace
  • Practical design: up to 5x faster than you can by hand, this wing nut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • ✔ GUARANTEE: At Mountwell Hardware we take pride in our product quality and craftsmanship and this is backed by our 100% money back guarantee.
  • ✔ INSTALLATION: The long wings provide for easy installation by hand and for a snug fit with the wing nut driver (available for purchase)
  • ✔ SPECS: Washer Diameter: ⅞” | Threaded Length ¼”
  • ✔ PURPOSE: Great for use with hurricane panels that utilize the "F" track design and with anchored bolts.
  • ✔ QUALITY: Premium quality zinc die cast construction that will not rust or corrode.

More Info

PANOVOS (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4" Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt

Search only PANOVO brand name
PANOVOS (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4

Current price: 7.99 USD

Saving: $5.00 (38%)


Check price and availability


  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low
  • Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life
  • Suitable size design: this wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank); The total length of the tool is about 6.55 cm/ 2.6 inch, the outer diameter of the socket is about 17.8 mm/ 0.7 inch, and the slots on the drill bit tool is 4 mm/ 1.55 inch wide
  • Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace
  • Practical design: up to 5x faster than you can by hand, this wing nut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • ✔ GUARANTEE: At Mountwell Hardware we take pride in our product quality and craftsmanship and this is backed by our 100% money back guarantee.
  • ✔ INSTALLATION: The long wings provide for easy installation by hand and for a snug fit with the wing nut driver (available for purchase)
  • ✔ SPECS: Washer Diameter: ⅞” | Threaded Length ¼”
  • ✔ PURPOSE: Great for use with hurricane panels that utilize the "F" track design and with anchored bolts.
  • ✔ QUALITY: Premium quality zinc die cast construction that will not rust or corrode.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slots on the drill bit tool is 4mm(1.55 inch) wide.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.

More Info

Deep Power Wing Nut Driver - Slot Wing Nuts Drill Bit Socket Wrenches Tools Set for Panel Nuts Screws Eye C Hook Bolt, 1/4" Hex Shank

Search only PAGOW brand name
Deep Power Wing Nut Driver - Slot Wing Nuts Drill Bit Socket Wrenches Tools Set for Panel Nuts Screws Eye C Hook Bolt, 1/4

Current price: 9.97 USD


Check price and availability


  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low
  • Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life
  • Suitable size design: this wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank); The total length of the tool is about 6.55 cm/ 2.6 inch, the outer diameter of the socket is about 17.8 mm/ 0.7 inch, and the slots on the drill bit tool is 4 mm/ 1.55 inch wide
  • Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace
  • Practical design: up to 5x faster than you can by hand, this wing nut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • ✔ GUARANTEE: At Mountwell Hardware we take pride in our product quality and craftsmanship and this is backed by our 100% money back guarantee.
  • ✔ INSTALLATION: The long wings provide for easy installation by hand and for a snug fit with the wing nut driver (available for purchase)
  • ✔ SPECS: Washer Diameter: ⅞” | Threaded Length ¼”
  • ✔ PURPOSE: Great for use with hurricane panels that utilize the "F" track design and with anchored bolts.
  • ✔ QUALITY: Premium quality zinc die cast construction that will not rust or corrode.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slots on the drill bit tool is 4mm(1.55 inch) wide.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • The total length of the tool is about7.99cm(3.11 inch); the outer diameter of the socket is about 17mm(0.67inch); and the slots on the drill bit tool is 5mm(1.9 inch) wide.
  • This nuts tools A must have for hurricane Snowstorm prone areas
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.

More Info

PAGOW 2-Pack Hurricane Wingnut Driver - Wing Nut Drill Bit Socket Tool, 1/4" Hex Shank for Panel Nuts, Screws Eye C Hook & Q-Hanger, Steel

Search only PAGOW brand name
PAGOW 2-Pack Hurricane Wingnut Driver - Wing Nut Drill Bit Socket Tool, 1/4

Current price: 8.49 USD


Check price and availability


  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low
  • Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life
  • Suitable size design: this wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank); The total length of the tool is about 6.55 cm/ 2.6 inch, the outer diameter of the socket is about 17.8 mm/ 0.7 inch, and the slots on the drill bit tool is 4 mm/ 1.55 inch wide
  • Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace
  • Practical design: up to 5x faster than you can by hand, this wing nut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • ✔ GUARANTEE: At Mountwell Hardware we take pride in our product quality and craftsmanship and this is backed by our 100% money back guarantee.
  • ✔ INSTALLATION: The long wings provide for easy installation by hand and for a snug fit with the wing nut driver (available for purchase)
  • ✔ SPECS: Washer Diameter: ⅞” | Threaded Length ¼”
  • ✔ PURPOSE: Great for use with hurricane panels that utilize the "F" track design and with anchored bolts.
  • ✔ QUALITY: Premium quality zinc die cast construction that will not rust or corrode.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slots on the drill bit tool is 4mm(1.55 inch) wide.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • The total length of the tool is about7.99cm(3.11 inch); the outer diameter of the socket is about 17mm(0.67inch); and the slots on the drill bit tool is 5mm(1.9 inch) wide.
  • This nuts tools A must have for hurricane Snowstorm prone areas
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • This little wing nut driver is made from CR-V steel, highly strong and sturdy.
  • This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slot cutout is 4mm(0.157 inch) wide.
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.

More Info

PAGOW 2 Pack Upgraded 7.5mm/ 0.3inch Hurricane Wingnut Driver - Wing Nut Drill Bit Socket Tool, 1/4" Hex Shank for Panel Nuts, Screws Eye C Hook & Q-Hanger, Steel

Search only PAGOW brand name
PAGOW 2 Pack Upgraded 7.5mm/ 0.3inch Hurricane Wingnut Driver - Wing Nut Drill Bit Socket Tool, 1/4

Current price: 13.99 USD


Check price and availability


  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low
  • Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life
  • Suitable size design: this wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank); The total length of the tool is about 6.55 cm/ 2.6 inch, the outer diameter of the socket is about 17.8 mm/ 0.7 inch, and the slots on the drill bit tool is 4 mm/ 1.55 inch wide
  • Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace
  • Practical design: up to 5x faster than you can by hand, this wing nut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • ✔ GUARANTEE: At Mountwell Hardware we take pride in our product quality and craftsmanship and this is backed by our 100% money back guarantee.
  • ✔ INSTALLATION: The long wings provide for easy installation by hand and for a snug fit with the wing nut driver (available for purchase)
  • ✔ SPECS: Washer Diameter: ⅞” | Threaded Length ¼”
  • ✔ PURPOSE: Great for use with hurricane panels that utilize the "F" track design and with anchored bolts.
  • ✔ QUALITY: Premium quality zinc die cast construction that will not rust or corrode.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slots on the drill bit tool is 4mm(1.55 inch) wide.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • The total length of the tool is about7.99cm(3.11 inch); the outer diameter of the socket is about 17mm(0.67inch); and the slots on the drill bit tool is 5mm(1.9 inch) wide.
  • This nuts tools A must have for hurricane Snowstorm prone areas
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • This little wing nut driver is made from CR-V steel, highly strong and sturdy.
  • This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slot cutout is 4mm(0.157 inch) wide.
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • PACKAGE INCLUDE: 2-pack wing nut driver.
  • HIGH QUALITY MATERIAL: This wing nut driver is made from CR-V steel, which is highly strong and sturdy for long time use.
  • VERY EASY TO USE: You ust pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • LARGER SIZE/DIMENSION: This wing nut driver is a suitable kit which matches with any power drill (1/4 inch hex shank); the slots on the drill bit tool is 7.5mm/ 0.3 inch wide.
  • SPECIAL DESIGN FOR HURRICANE: This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.

More Info

2 Pack Deep Power Wing Nut Driver, Slot Wing Nuts Drill Bit Socket, Wrenches Tools Set for Panel Nuts Screws Eye C Hook Bolt, 1/4" Hex Shank

Search only PAGOW brand name
2 Pack Deep Power Wing Nut Driver, Slot Wing Nuts Drill Bit Socket, Wrenches Tools Set for Panel Nuts Screws Eye C Hook Bolt, 1/4

Current price: 10.99 USD


Check price and availability


  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low
  • Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life
  • Suitable size design: this wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank); The total length of the tool is about 6.55 cm/ 2.6 inch, the outer diameter of the socket is about 17.8 mm/ 0.7 inch, and the slots on the drill bit tool is 4 mm/ 1.55 inch wide
  • Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace
  • Practical design: up to 5x faster than you can by hand, this wing nut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster
  • Plain Surface has no
  • Steel is often used in applications where strength is the primary consideration
  • Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut
  • Clip is U-shaped for a secure hold on both sides of the panel when screwing down
  • Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold
  • ✔ GUARANTEE: At Mountwell Hardware we take pride in our product quality and craftsmanship and this is backed by our 100% money back guarantee.
  • ✔ INSTALLATION: The long wings provide for easy installation by hand and for a snug fit with the wing nut driver (available for purchase)
  • ✔ SPECS: Washer Diameter: ⅞” | Threaded Length ¼”
  • ✔ PURPOSE: Great for use with hurricane panels that utilize the "F" track design and with anchored bolts.
  • ✔ QUALITY: Premium quality zinc die cast construction that will not rust or corrode.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slots on the drill bit tool is 4mm(1.55 inch) wide.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • The total length of the tool is about7.99cm(3.11 inch); the outer diameter of the socket is about 17mm(0.67inch); and the slots on the drill bit tool is 5mm(1.9 inch) wide.
  • This nuts tools A must have for hurricane Snowstorm prone areas
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • This little wing nut driver is made from CR-V steel, highly strong and sturdy.
  • This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch); the outer diameter of the socket is about 17.8mm(0.7 inch); and the slot cutout is 4mm(0.157 inch) wide.
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • PACKAGE INCLUDE: 2-pack wing nut driver.
  • HIGH QUALITY MATERIAL: This wing nut driver is made from CR-V steel, which is highly strong and sturdy for long time use.
  • VERY EASY TO USE: You ust pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • LARGER SIZE/DIMENSION: This wing nut driver is a suitable kit which matches with any power drill (1/4 inch hex shank); the slots on the drill bit tool is 7.5mm/ 0.3 inch wide.
  • SPECIAL DESIGN FOR HURRICANE: This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • This nuts tools A must have for hurricane Snowstorm prone areas
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
  • Package include: 2 Pack Deep Power Wing Nut Driver

More Info

1    2    3    4    5    6    7    8    9    10