Best Pipe Taps. Reviews April, 2020

Drill America 5 Piece NPT Pipe Tap Set (1/8", 1/4", 3/8", 1/2" and 3/4"), Plastic Pouch Case, POU Series

Search only Drill America brand name
Drill America 5 Piece NPT Pipe Tap Set (1/8

Current price: 30 USD


Check price and availability


  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads

More Info

Drill America 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wooden Case

Search only Drill America brand name
Drill America 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8

Current price: 45.22 USD


Check price and availability


Height: 4 Inches

Length: 6 Inches

Width: 6 Inches

Weight: 4 Pounds

  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads

More Info

IRWIN Tap And Die Set, Tap and Hex Rethreading, 12-Piece (1920)

Search only IRWIN brand name
IRWIN Tap And Die Set, Tap and Hex Rethreading, 12-Piece (1920)

Current price: 173.15 USD


Check price and availability


Height: 1.8 Inches

Length: 12.6 Inches

Width: 8.6 Inches

Weight: 6 Pounds

  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Hexagon re-threading die sets

More Info

IRWIN NPT Tap, 2"-11 1/2" (1910ZR)

Search only IRWIN brand name
IRWIN NPT Tap, 2

Current price: 68.99 USD

Saving: $38.01 (36%)


Check price and availability


Height: 2.75 Inches

Length: 4.5 Inches

Width: 2.75 Inches

Weight: 0.65 Pounds

Warranty: Manufacturer

  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Hexagon re-threading die sets
  • Threading taps 
  • Made in the United States
  • 1910Zr - Tap 2"-11 1/2Npt Pipe"

More Info

IRWIN NPT Tap, 1 1/2"-11 1/2" (1909ZR)

Search only IRWIN brand name
IRWIN NPT Tap, 1 1/2

Current price: 44.65 USD

Saving: $33.23 (43%)


Check price and availability


Height: 2.8 Inches

Length: 5.7 Inches

Width: 3 Inches

Weight: 1.85 Pounds

  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Hexagon re-threading die sets
  • Threading taps 
  • Made in the United States
  • 1910Zr - Tap 2"-11 1/2Npt Pipe"
  • Threading taps 
  • Made in the United States
  • 1909Zr - Tap 1 1/2"-11 1/2Npt Pipe"

More Info

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4", 3/8", 1/2", 3/4", 1" and 1-1/4"), Carbon Steel, DWT Series, Uncoated (Bright), Small

Search only Drill America brand name
Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4

Current price: 55.86 USD


Check price and availability


Height: 4 Inches

Length: 6 Inches

Width: 6 Inches

Weight: 4 Pounds

  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Hexagon re-threading die sets
  • Threading taps 
  • Made in the United States
  • 1910Zr - Tap 2"-11 1/2Npt Pipe"
  • Threading taps 
  • Made in the United States
  • 1909Zr - Tap 1 1/2"-11 1/2Npt Pipe"
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4", 3/8", 1/2", 3/4", 1" and 1-1/4"
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads

More Info

Drill America 3/4"-14 NPT Pipe Tap, Carbon Steel, DWTPT Series

Search only Drill America brand name
Drill America 3/4

Current price: 10.94 USD


Check price and availability


Height: 2 Inches

Length: 6 Inches

Width: 4 Inches

  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Hexagon re-threading die sets
  • Threading taps 
  • Made in the United States
  • 1910Zr - Tap 2"-11 1/2Npt Pipe"
  • Threading taps 
  • Made in the United States
  • 1909Zr - Tap 1 1/2"-11 1/2Npt Pipe"
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4", 3/8", 1/2", 3/4", 1" and 1-1/4"
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads

More Info

IRWIN Tap Set, Taper Pipe, 6-Piece (1921ZR)

Search only Irwin brand name
IRWIN Tap Set, Taper Pipe, 6-Piece (1921ZR)

Current price: 105.05 USD

Saving: $31.21 (23%)


Check price and availability


Height: 2.3 Inches

Length: 14.3 Inches

Width: 10 Inches

Weight: 1.5 Pounds

  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Hexagon re-threading die sets
  • Threading taps 
  • Made in the United States
  • 1910Zr - Tap 2"-11 1/2Npt Pipe"
  • Threading taps 
  • Made in the United States
  • 1909Zr - Tap 1 1/2"-11 1/2Npt Pipe"
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4", 3/8", 1/2", 3/4", 1" and 1-1/4"
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA.
  • Tapered at a rate of 3/4-Inch per foot
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP)
  • Nominal size of the tap is that of the pipe fitting being tapped
  • Cuts internal threads in pipes. Ideal for pipe fittings.

More Info

6PC 1/4" 3/8" 1/2" STEEL TAP & DIE TOOL THREADER THREAD KIT PIPE THREADING

Search only Drill Bits brand name
6PC 1/4

Current price: 22.95 USD


Check price and availability


  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Hexagon re-threading die sets
  • Threading taps 
  • Made in the United States
  • 1910Zr - Tap 2"-11 1/2Npt Pipe"
  • Threading taps 
  • Made in the United States
  • 1909Zr - Tap 1 1/2"-11 1/2Npt Pipe"
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4", 3/8", 1/2", 3/4", 1" and 1-1/4"
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA.
  • Tapered at a rate of 3/4-Inch per foot
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP)
  • Nominal size of the tap is that of the pipe fitting being tapped
  • Cuts internal threads in pipes. Ideal for pipe fittings.

More Info

Drill America 1/8" Carbon Steel NPT Pipe Tap and R High Speed Steel Drill Bit Set, POU Series

Search only Drill America brand name
Drill America 1/8

Current price: 5.33 USD


Check price and availability


Height: 2 Inches

Length: 6 Inches

Width: 4 Inches

Weight: 1 Pounds

  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes 1/8", 1/4", 3/8", 1/2", 3/4" and 1" in Wood Case
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Hexagon re-threading die sets
  • Threading taps 
  • Made in the United States
  • 1910Zr - Tap 2"-11 1/2Npt Pipe"
  • Threading taps 
  • Made in the United States
  • 1909Zr - Tap 1 1/2"-11 1/2Npt Pipe"
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4", 3/8", 1/2", 3/4", 1" and 1-1/4"
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
  • Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Round shank with square end
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA.
  • Tapered at a rate of 3/4-Inch per foot
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP)
  • Nominal size of the tap is that of the pipe fitting being tapped
  • Cuts internal threads in pipes. Ideal for pipe fittings.
  • Set contains matching NPT pipe tap and high speed steel drill bit
  • Set comes in plastic pouch
  • 1/8" carbon steel NPT tap and "R" HSS drill bit
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads

More Info

1    2    3    4    5    6    7    8    9    10