Best Pitman Shaft Bearings. Reviews September, 2020

Firewall Mount Steering Flange Sleeve, 3/4 Inch Shaft

Search only Speedway Motors brand name
Firewall Mount Steering Flange Sleeve, 3/4 Inch Shaft

Current price: 18.24 USD


Check price and availability


Height: 1 Inches

Length: 3 Inches

Width: 2 Inches

Weight: 1 Pounds

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall

More Info

Firewall Mount Steering Shaft Bearing, 3/4 Inch Shaft Size

Search only Speedway Motors brand name
Firewall Mount Steering Shaft Bearing, 3/4 Inch Shaft Size

Current price: 24.99 USD


Check price and availability


Height: 1 Inches

Length: 3 Inches

Width: 3 Inches

Weight: 1 Pounds

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)

More Info

Detroit Axle - 4x4 (Both) Front Wheel Hub and Bearing Assembly Old Square Body Style for 1995-1999 K1500, K2500 Tahoe, Yukon 6 Lug W/ABS

Search only Detroit Axle brand name
Detroit Axle - 4x4 (Both) Front Wheel Hub and Bearing Assembly Old Square Body Style for 1995-1999 K1500, K2500 Tahoe, Yukon 6 Lug W/ABS

Current price: 87.25 USD


Check price and availability


Height: 7 Inches

Length: 16 Inches

Width: 7 Inches

Weight: 26 Pounds

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required!
  • 6-Lugs | Flange Type: 3-Bolt Triangular | ABS Type: Sensor
  • 4x4 Models Only

More Info

Firewall Mount Steering Flange Sleeve, 0.995 Inch Shaft

Search only Speedway Motors brand name
Firewall Mount Steering Flange Sleeve, 0.995 Inch Shaft

Current price: 18.24 USD


Check price and availability


Height: 1 Inches

Length: 3 Inches

Width: 2 Inches

Weight: 1 Pounds

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required!
  • 6-Lugs | Flange Type: 3-Bolt Triangular | ABS Type: Sensor
  • 4x4 Models Only
  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall

More Info

ACDelco 3981935 GM Original Equipment Lower Steering Shaft Bearing

Search only ACDelco brand name
ACDelco 3981935 GM Original Equipment Lower Steering Shaft Bearing

Current price: 40.98 USD


Check price and availability


Height: 3 Inches

Length: 3 Inches

Width: 3 Inches

Weight: 0.5 Pounds

Warranty: 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required!
  • 6-Lugs | Flange Type: 3-Bolt Triangular | ABS Type: Sensor
  • 4x4 Models Only
  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Correct steering looseness caused by worn steering shaft bearings

More Info

Jeep Wrangler Intermediate Steering Shaft Assembly w/Coupler Rag Universal U-Joint(s) Fits 1987-1995 Jeep Wrangler w/Power Steering 52007017

Search only BeAcc brand name
Jeep Wrangler Intermediate Steering Shaft Assembly w/Coupler Rag Universal U-Joint(s) Fits 1987-1995 Jeep Wrangler w/Power Steering 52007017

Current price: 66.98 USD


Check price and availability


  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required!
  • 6-Lugs | Flange Type: 3-Bolt Triangular | ABS Type: Sensor
  • 4x4 Models Only
  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Correct steering looseness caused by worn steering shaft bearings
  • OEM#52007017
  • Direct Fit or Extends Up To 11.5" For Lifted Jeeps Replaces
  • Lower Intermediate Steering Shaft Assembly
  • Fits 1987-1995 Jeep Wrangler All Models
  • Brand New Universal Rag Joints Extends An Extra 11.5" For Lifted Jeeps

More Info

Gates 349600 Pitman Shaft Kit

Search only Gates brand name
Gates 349600 Pitman Shaft Kit

Current price: 11.09 USD


Check price and availability


Height: 1.8 Inches

Length: 5.5 Inches

Width: 5.2 Inches

Weight: 0.06 Pounds

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required!
  • 6-Lugs | Flange Type: 3-Bolt Triangular | ABS Type: Sensor
  • 4x4 Models Only
  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Correct steering looseness caused by worn steering shaft bearings
  • OEM#52007017
  • Direct Fit or Extends Up To 11.5" For Lifted Jeeps Replaces
  • Lower Intermediate Steering Shaft Assembly
  • Fits 1987-1995 Jeep Wrangler All Models
  • Brand New Universal Rag Joints Extends An Extra 11.5" For Lifted Jeeps
  • Package Weight: 0.066 kilograms
  • Country of origin: Taiwan, Province Of China
  • Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
  • Package Dimension: 5.38"L x 5.23"W x 2.6"H

More Info

ACDelco 36-349730 Professional Steering Gear Pitman Shaft Seal Kit with Bushing, Seals, and Snap Ring

Search only ACDelco brand name
ACDelco 36-349730 Professional Steering Gear Pitman Shaft Seal Kit with Bushing, Seals, and Snap Ring

Current price: 24.07 USD


Check price and availability


Height: 2.1 Inches

Length: 5.7 Inches

Width: 5.4 Inches

Weight: 0.15 Pounds

Warranty: 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required!
  • 6-Lugs | Flange Type: 3-Bolt Triangular | ABS Type: Sensor
  • 4x4 Models Only
  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Correct steering looseness caused by worn steering shaft bearings
  • OEM#52007017
  • Direct Fit or Extends Up To 11.5" For Lifted Jeeps Replaces
  • Lower Intermediate Steering Shaft Assembly
  • Fits 1987-1995 Jeep Wrangler All Models
  • Brand New Universal Rag Joints Extends An Extra 11.5" For Lifted Jeeps
  • Package Weight: 0.066 kilograms
  • Country of origin: Taiwan, Province Of China
  • Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
  • Package Dimension: 5.38"L x 5.23"W x 2.6"H
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and funtion
  • Replacing pertinent components with a set of high-quality aftermarket replacement steering gear parts can help fix issues without the cost of purchasing and installing a completely new pitman shaft or integral steering gear

More Info

Detroit Axle - 17PC Complete Front CV Axle Drive Shaft, Wheel Hub & Bearing, Upper Control Arm Suspension Kit for 01-06 Chevy GMC 4x4 8-LUG Silverado Sierra 1500 HD 2500 HD 3500 Classic Body

Search only Detroit Axle brand name
Detroit Axle - 17PC Complete Front CV Axle Drive Shaft, Wheel Hub & Bearing, Upper Control Arm Suspension Kit for 01-06 Chevy GMC 4x4 8-LUG Silverado Sierra 1500 HD 2500 HD 3500 Classic Body

Current price: 389.25 USD


Check price and availability


Height: 6 Inches

Length: 31 Inches

Width: 6 Inches

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required!
  • 6-Lugs | Flange Type: 3-Bolt Triangular | ABS Type: Sensor
  • 4x4 Models Only
  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Correct steering looseness caused by worn steering shaft bearings
  • OEM#52007017
  • Direct Fit or Extends Up To 11.5" For Lifted Jeeps Replaces
  • Lower Intermediate Steering Shaft Assembly
  • Fits 1987-1995 Jeep Wrangler All Models
  • Brand New Universal Rag Joints Extends An Extra 11.5" For Lifted Jeeps
  • Package Weight: 0.066 kilograms
  • Country of origin: Taiwan, Province Of China
  • Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
  • Package Dimension: 5.38"L x 5.23"W x 2.6"H
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and funtion
  • Replacing pertinent components with a set of high-quality aftermarket replacement steering gear parts can help fix issues without the cost of purchasing and installing a completely new pitman shaft or integral steering gear
  • CV Axles in this kit are Manufactured with a Lifetime Warranty on Internal Components
  • Excellent tolerance to resist high and low temperatures
  • Axle Specifications: NEW, Overall Length: 21 11/16" - Inner Spline: Bolt-On 6 Hole - Outer Spline: 33 - Inner Shape: Can
  • Kit Includes: (2) 2x Front CV Axle Drive Shaft -8 Lug, (2) Front Wheel Hub & Bearing w/ABS, (2) Upper Control Arm and Pre-Assembled Ball Joint, (2) Lower Ball Joint, (2) Sway Bar, (2) Inner Tie Rod, (2) Outer Tie Rod, (1) Idler Arm, (1) Pitman Arm - 3-Groove, (1) Idler Arm Bracket
  • READ SPECIFIC FITMENT: FITS 4x4 4WD MODELS w/8-LUG ONLY - 02-06 Chevorlet Avalanche 2500 - [01-03 Silverado 1500 HD] - 05-07 Silverado 1500 HD Classic - [01-04 Silverado 2500] - 01-07 Silverado 2500 HD Classic Body - [00-06 Suburban 2500] - 01-06 Silverado 3500 - [01-03 GMC Sierra 1500 HD] - 05-07 GMC Sierra 1500 HD Classic - [01-04 GMC Sierra 2500] - 01-07 GMC Sierra 2500 HD Classic Body - [00-06 GMC Yukon XL 2500] - 01-06 GMC Sierra 3500

More Info

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

Search only Orion Motor Tech brand name
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

Current price: 39.59 USD


Check price and availability


Height: 3.54 Inches

Length: 13.98 Inches

Width: 11.91 Inches

Warranty: 2 Years Warranty, Free Replace or Full Refund

  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Allows 25 degree misalignment
  • Bearing housed in a lightweight aluminum bracket for easy installation on firewall
  • Slips over your 3/4" steering shaft (.757 I.D.)
  • 10-Year Warranty
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
  • OEM Design Direct Fit - Ready to Install - No Special Tools Required!
  • 6-Lugs | Flange Type: 3-Bolt Triangular | ABS Type: Sensor
  • 4x4 Models Only
  • Choose from .750" or 1" shaft size
  • Zinc plated for corrosion resistance
  • 5/16" mounting holes are spaced 2-1/4" center to center
  • Allows for up to 30 degrees of misalignment making it perfect for a variety of vehicles
  • This support bearing works well to support a steering shaft where it passes through the firewall
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Correct steering looseness caused by worn steering shaft bearings
  • OEM#52007017
  • Direct Fit or Extends Up To 11.5" For Lifted Jeeps Replaces
  • Lower Intermediate Steering Shaft Assembly
  • Fits 1987-1995 Jeep Wrangler All Models
  • Brand New Universal Rag Joints Extends An Extra 11.5" For Lifted Jeeps
  • Package Weight: 0.066 kilograms
  • Country of origin: Taiwan, Province Of China
  • Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)
  • Package Dimension: 5.38"L x 5.23"W x 2.6"H
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and funtion
  • Replacing pertinent components with a set of high-quality aftermarket replacement steering gear parts can help fix issues without the cost of purchasing and installing a completely new pitman shaft or integral steering gear
  • CV Axles in this kit are Manufactured with a Lifetime Warranty on Internal Components
  • Excellent tolerance to resist high and low temperatures
  • Axle Specifications: NEW, Overall Length: 21 11/16" - Inner Spline: Bolt-On 6 Hole - Outer Spline: 33 - Inner Shape: Can
  • Kit Includes: (2) 2x Front CV Axle Drive Shaft -8 Lug, (2) Front Wheel Hub & Bearing w/ABS, (2) Upper Control Arm and Pre-Assembled Ball Joint, (2) Lower Ball Joint, (2) Sway Bar, (2) Inner Tie Rod, (2) Outer Tie Rod, (1) Idler Arm, (1) Pitman Arm - 3-Groove, (1) Idler Arm Bracket
  • READ SPECIFIC FITMENT: FITS 4x4 4WD MODELS w/8-LUG ONLY - 02-06 Chevorlet Avalanche 2500 - [01-03 Silverado 1500 HD] - 05-07 Silverado 1500 HD Classic - [01-04 Silverado 2500] - 01-07 Silverado 2500 HD Classic Body - [00-06 Suburban 2500] - 01-06 Silverado 3500 - [01-03 GMC Sierra 1500 HD] - 05-07 GMC Sierra 1500 HD Classic - [01-04 GMC Sierra 2500] - 01-07 GMC Sierra 2500 HD Classic Body - [00-06 GMC Yukon XL 2500] - 01-06 GMC Sierra 3500
  • ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.

More Info

1    2    3    4    5    6    7    8    9    10