Best Pressure Calibrators. Reviews November, 2020

Reed Instruments R8090 (SC-05) Sound Level Calibrator for 1/2" Diameter Microphones, +/-0.5dB Accuracy

Search only REED Instruments brand name
Reed Instruments R8090 (SC-05) Sound Level Calibrator for 1/2

Current price: 181.37 USD


Check price and availability


Height: 2 Inches

Length: 4.72 Inches

Width: 1.69 Inches

Weight: 0.35 Pounds

  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter

More Info

Fluke 754 Documenting Process Calibrator with HART Communication

Search only Fluke brand name
Fluke 754 Documenting Process Calibrator with HART Communication

Current price: 6715.97 USD

Saving: $1,174.02 (15%)


Check price and availability


Weight: 8.487797087 Pounds

  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments

More Info

Pressure and Vacuum Hand Pump Calibrator (Only Pump) by ACE Instruments Model: AI-DP1-2200

Search only Ace Instruments brand name
Pressure and Vacuum Hand Pump Calibrator (Only Pump) by ACE Instruments Model: AI-DP1-2200

Current price: 280 USD


Check price and availability


  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")
  • Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
  • Vacuum Range: Ambient to -0.9 Kg/Cm²; Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)
  • Model: AI-DP1-2200; Measuring Parameters: Pressure and Vacuum

More Info

Fluke Calibration 9103-A-156 Drywell Temperature Pressure Calibrator with Type A Insert, -25 to 140°C Temperature Range, 115V

Search only Fluke brand name
Fluke Calibration 9103-A-156 Drywell Temperature Pressure Calibrator with Type A Insert, -25 to 140°C Temperature Range, 115V

Current price: 4020 USD


Check price and availability


  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")
  • Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
  • Vacuum Range: Ambient to -0.9 Kg/Cm²; Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)
  • Model: AI-DP1-2200; Measuring Parameters: Pressure and Vacuum
  • Temperature switch hold
  • Temperature scan rate control
  • Easy to recalibrate
  • RS-232 and Interface-it software included
  • Lightweight and very portable

More Info

Fluke 700PTPK Pneumatic Test Pump Kit, 0 to 600 psi Pressure

Search only Fluke brand name
Fluke 700PTPK Pneumatic Test Pump Kit, 0 to 600 psi Pressure

Current price: 1049.99 USD


Check price and availability


  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")
  • Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
  • Vacuum Range: Ambient to -0.9 Kg/Cm²; Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)
  • Model: AI-DP1-2200; Measuring Parameters: Pressure and Vacuum
  • Temperature switch hold
  • Temperature scan rate control
  • Easy to recalibrate
  • RS-232 and Interface-it software included
  • Lightweight and very portable
  • Includes hoses and adapters for connecting to the pressure device to be tested
  • Use kit with 700PXX pressure modules and 71x calibrators
  • Connects directly to the 700G series pressure test gauges
  • Generates pressure up to 600 psi
  • Pneumatic test pump kit

More Info

Fluke - 664133 725 Multifunction Process Calibrator

Search only Fluke brand name
Fluke - 664133 725 Multifunction Process Calibrator

Current price: 2995.05 USD


Check price and availability


Height: 3.3 Inches

Length: 10 Inches

Width: 7.8 Inches

Weight: 2.6896395964 Pounds

  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")
  • Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
  • Vacuum Range: Ambient to -0.9 Kg/Cm²; Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)
  • Model: AI-DP1-2200; Measuring Parameters: Pressure and Vacuum
  • Temperature switch hold
  • Temperature scan rate control
  • Easy to recalibrate
  • RS-232 and Interface-it software included
  • Lightweight and very portable
  • Includes hoses and adapters for connecting to the pressure device to be tested
  • Use kit with 700PXX pressure modules and 71x calibrators
  • Connects directly to the 700G series pressure test gauges
  • Generates pressure up to 600 psi
  • Pneumatic test pump kit
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
  • Easy to read measure/source screen lets you view input and output simultaneously
  • Small, streamlined shape, rugged, reliable design stands up to field use
  • The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter

More Info

Fluke FLUKE-707 707 Loop Calibrator with Quick Click Knob, 28V Voltage, 24mA Current, 0.015 percent Accuracy

Search only Fluke brand name
Fluke FLUKE-707 707 Loop Calibrator with Quick Click Knob, 28V Voltage, 24mA Current, 0.015 percent Accuracy

Current price: 831.49 USD

Saving: $98.50 (11%)


Check price and availability


Height: 5.98 Inches

Length: 2.76 Inches

Width: 1.61 Inches

Weight: 1.5652820602 Pounds

  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")
  • Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
  • Vacuum Range: Ambient to -0.9 Kg/Cm²; Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)
  • Model: AI-DP1-2200; Measuring Parameters: Pressure and Vacuum
  • Temperature switch hold
  • Temperature scan rate control
  • Easy to recalibrate
  • RS-232 and Interface-it software included
  • Lightweight and very portable
  • Includes hoses and adapters for connecting to the pressure device to be tested
  • Use kit with 700PXX pressure modules and 71x calibrators
  • Connects directly to the 700G series pressure test gauges
  • Generates pressure up to 600 psi
  • Pneumatic test pump kit
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
  • Easy to read measure/source screen lets you view input and output simultaneously
  • Small, streamlined shape, rugged, reliable design stands up to field use
  • The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter
  • 3 year warranty
  • 0-28 VDC measurement to check loop voltage; easy battery exchange without opening the case; compact case with separate protective holster
  • Selectable step or ramp outputs; 24V Loop supply with mA measure, including 250O HART resistor
  • 0.015 Percent accuracy and 0.001 mA resolution; simultaneous mA and percent of span display
  • One handed user interface with "quick click" detented knob; mA sourcing, simulation and measurement

More Info

FLUKE-750P08 Pressure Module, 0 to 1000 psi

Search only Fluke brand name
FLUKE-750P08 Pressure Module, 0 to 1000 psi

Current price: 1679.99 USD


Check price and availability


Weight: 0.65 Pounds

  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")
  • Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
  • Vacuum Range: Ambient to -0.9 Kg/Cm²; Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)
  • Model: AI-DP1-2200; Measuring Parameters: Pressure and Vacuum
  • Temperature switch hold
  • Temperature scan rate control
  • Easy to recalibrate
  • RS-232 and Interface-it software included
  • Lightweight and very portable
  • Includes hoses and adapters for connecting to the pressure device to be tested
  • Use kit with 700PXX pressure modules and 71x calibrators
  • Connects directly to the 700G series pressure test gauges
  • Generates pressure up to 600 psi
  • Pneumatic test pump kit
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
  • Easy to read measure/source screen lets you view input and output simultaneously
  • Small, streamlined shape, rugged, reliable design stands up to field use
  • The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter
  • 3 year warranty
  • 0-28 VDC measurement to check loop voltage; easy battery exchange without opening the case; compact case with separate protective holster
  • Selectable step or ramp outputs; 24V Loop supply with mA measure, including 250O HART resistor
  • 0.015 Percent accuracy and 0.001 mA resolution; simultaneous mA and percent of span display
  • One handed user interface with "quick click" detented knob; mA sourcing, simulation and measurement
  • Each module has its own serial number to maintain independent traceability
  • Fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
  • Temperature compensated from 0 °C to 50 °C (32 °F to 122 °F)
  • Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
  • Rugged construction, urethane over molding protects against shock if a module is accidentally dropped and also seals against dirt, dust, and moisture

More Info

Instrukart Ace Bench Type Pressure Calibrator

Search only Instrukart brand name
Instrukart Ace Bench Type Pressure Calibrator

Current price: 840 USD


Check price and availability


  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")
  • Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
  • Vacuum Range: Ambient to -0.9 Kg/Cm²; Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)
  • Model: AI-DP1-2200; Measuring Parameters: Pressure and Vacuum
  • Temperature switch hold
  • Temperature scan rate control
  • Easy to recalibrate
  • RS-232 and Interface-it software included
  • Lightweight and very portable
  • Includes hoses and adapters for connecting to the pressure device to be tested
  • Use kit with 700PXX pressure modules and 71x calibrators
  • Connects directly to the 700G series pressure test gauges
  • Generates pressure up to 600 psi
  • Pneumatic test pump kit
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
  • Easy to read measure/source screen lets you view input and output simultaneously
  • Small, streamlined shape, rugged, reliable design stands up to field use
  • The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter
  • 3 year warranty
  • 0-28 VDC measurement to check loop voltage; easy battery exchange without opening the case; compact case with separate protective holster
  • Selectable step or ramp outputs; 24V Loop supply with mA measure, including 250O HART resistor
  • 0.015 Percent accuracy and 0.001 mA resolution; simultaneous mA and percent of span display
  • One handed user interface with "quick click" detented knob; mA sourcing, simulation and measurement
  • Each module has its own serial number to maintain independent traceability
  • Fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
  • Temperature compensated from 0 °C to 50 °C (32 °F to 122 °F)
  • Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
  • Rugged construction, urethane over molding protects against shock if a module is accidentally dropped and also seals against dirt, dust, and moisture
  • Box Contains: Pressure Calibrator,Pressure adapters set, 4 X handles, Spare seals, Pointer puller
  • Base plate: Stainless Steel; Note: MASTER PRESSURE GAUGE To be bought separately. Available in both Digital & Analog Versions (Contact Store)
  • No.of handles: 4 for Pressure Generation; Seals: Spare Seals Provided; Pointer puller: Provided; Liquid Reservoir and lock needle: Provided for Water or Oil; Cylinder assembly: Available
  • Pressure Adapters kit: 1/8” BSP (F) - 1 No., 1/4” BSP (F) - 2 Nos., 3/8” BSP (F) - 1 No., 1/2” BSP (F) - 1 No.
  • Measuring Range: 0-200 kg/cm², 0-400 kg/cm², 0-700 kg/cm², Contact Store for Commercials

More Info

Fluke - FLUKE-709H 709H Loop Calibrator with HART communication

Search only Fluke brand name
Fluke - FLUKE-709H 709H Loop Calibrator with HART communication

Current price: 1359.99 USD


Check price and availability


Weight: 0.661386786 Pounds

  • Accomodates 1/2 inch diameter microphones
  • Accuracy of +/-0.5dB
  • Output sound pressure levels of 94dB and 114dB
  • Simply place calibrator on microphone, turn on and adjust your sound level meter
  • Generates stable acoustic signal at a controlled frequency and amplitude to verify the accuracy of your sound level meter
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4")
  • Material Of Construction: Aluminium and Stainless Steel; Weight Approx. 1.5 Kgs.
  • Vacuum Range: Ambient to -0.9 Kg/Cm²; Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)
  • Model: AI-DP1-2200; Measuring Parameters: Pressure and Vacuum
  • Temperature switch hold
  • Temperature scan rate control
  • Easy to recalibrate
  • RS-232 and Interface-it software included
  • Lightweight and very portable
  • Includes hoses and adapters for connecting to the pressure device to be tested
  • Use kit with 700PXX pressure modules and 71x calibrators
  • Connects directly to the 700G series pressure test gauges
  • Generates pressure up to 600 psi
  • Pneumatic test pump kit
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
  • Easy to read measure/source screen lets you view input and output simultaneously
  • Small, streamlined shape, rugged, reliable design stands up to field use
  • The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter
  • 3 year warranty
  • 0-28 VDC measurement to check loop voltage; easy battery exchange without opening the case; compact case with separate protective holster
  • Selectable step or ramp outputs; 24V Loop supply with mA measure, including 250O HART resistor
  • 0.015 Percent accuracy and 0.001 mA resolution; simultaneous mA and percent of span display
  • One handed user interface with "quick click" detented knob; mA sourcing, simulation and measurement
  • Each module has its own serial number to maintain independent traceability
  • Fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form
  • Temperature compensated from 0 °C to 50 °C (32 °F to 122 °F)
  • Convenient setup, one-meter cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source
  • Rugged construction, urethane over molding protects against shock if a module is accidentally dropped and also seals against dirt, dust, and moisture
  • Box Contains: Pressure Calibrator,Pressure adapters set, 4 X handles, Spare seals, Pointer puller
  • Base plate: Stainless Steel; Note: MASTER PRESSURE GAUGE To be bought separately. Available in both Digital & Analog Versions (Contact Store)
  • No.of handles: 4 for Pressure Generation; Seals: Spare Seals Provided; Pointer puller: Provided; Liquid Reservoir and lock needle: Provided for Water or Oil; Cylinder assembly: Available
  • Pressure Adapters kit: 1/8” BSP (F) - 1 No., 1/4” BSP (F) - 2 Nos., 3/8” BSP (F) - 1 No., 1/2” BSP (F) - 1 No.
  • Measuring Range: 0-200 kg/cm², 0-400 kg/cm², 0-700 kg/cm², Contact Store for Commercials
  • 24 V DC loop power with mA Measure Mode (-25% to 125%)
  • Built in selectable 250 Ω resistor for HART communication
  • Intuitive user interface with Quick-Set knob for fast setup, easy use
  • Small rugged design operates on (6) standard AAA batteries
  • Best-in-class accuracy at 0.01% reading

More Info

1    2    3    4    5    6    7    8    9    10