Best RV Hitch Bumper Hitch. Reviews December, 2020

Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam, 2" Receiver with Hitch Pin & Hitch Cover

Search only Ohuhu brand name
Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5

Current price: 29.99 USD


Check price and availability


  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.

More Info

Towever 83801 RV Bumper Hitch Receiver 2 inches Adapter for 4-4.5 inches Travel Trailer Rear Bumper

Search only Towever brand name
Towever 83801 RV Bumper Hitch Receiver 2 inches Adapter for 4-4.5 inches Travel Trailer Rear Bumper

Current price: 29.98 USD


Check price and availability


Height: 5.511811018 Inches

Length: 7.480314953 Inches

Width: 4.1338582635 Inches

Weight: 10.8467432904 Pounds

  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )

More Info

Towever 83803 RV Bumper Hitch 2 inches Receiver Adapter for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose

Search only Towever brand name
Towever 83803 RV Bumper Hitch 2 inches Receiver Adapter for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose

Current price: 35.98 USD

Saving: $21.00 (37%)


Check price and availability


  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • Heavy duty constructed and black powder coated for corrosion resistance.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.

More Info

CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

Search only CURT brand name
CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

Current price: 69.6 USD

Saving: $59.77 (46%)


Check price and availability


Height: 6 Inches

Length: 11 Inches

Width: 9 Inches

Weight: 0.5 Pounds

Warranty: Manufacturer warranty

  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • Heavy duty constructed and black powder coated for corrosion resistance.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

More Info

TOPTOW RV Bumper 2 inch Hitch Receiver Adapter 63801 for 4 inch X 4 inch and 4.5 inch X 4.5 inch Bumpers, Fits for Bike Racks, Cargo Carriers Camper-on

Search only TOPTOW brand name
TOPTOW RV Bumper 2 inch Hitch Receiver Adapter 63801 for 4 inch X 4 inch and 4.5 inch X 4.5 inch Bumpers, Fits for Bike Racks, Cargo Carriers Camper-on

Current price: 27.99 USD

Saving: $5.70 (17%)


Check price and availability


  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • Heavy duty constructed and black powder coated for corrosion resistance.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • Attaches to Bumper Using 4" Bolts (included). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: Designed for 4" x 4" and 4-1/2" x 4-1/2" Continuous-welded Steel Bumpers (Can be Mounted Upside Down)
  • Allows 200 Ibs Tongue Weight Capacity
  • Attention: This Accessories is NOT Intended for RV Level Towing Purpose

More Info

TOPTOW 63803 RV Bumper Hitch Receiver 2 inch Adapter Receiver Openning 3500 LBS Capacity Fits for 4 inch X 4 inch Square RV Rear Bumpers

Search only TOPTOW brand name
TOPTOW 63803 RV Bumper Hitch Receiver 2 inch Adapter Receiver Openning 3500 LBS Capacity Fits for 4 inch X 4 inch Square RV Rear Bumpers

Current price: 35.99 USD

Saving: $18.00 (33%)


Check price and availability


Height: 8.27 Inches

Length: 8.27 Inches

Width: 8.27 Inches

  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • Heavy duty constructed and black powder coated for corrosion resistance.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • Attaches to Bumper Using 4" Bolts (included). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: Designed for 4" x 4" and 4-1/2" x 4-1/2" Continuous-welded Steel Bumpers (Can be Mounted Upside Down)
  • Allows 200 Ibs Tongue Weight Capacity
  • Attention: This Accessories is NOT Intended for RV Level Towing Purpose
  • 2 set of Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down)
  • Allows 350 Ibs Tongue Weight Capacity
  • This Accessories is used for RV Level Towing Purpose

More Info

Quick Products QPRBAB Deluxe RV Bumper Receiver Adapter – 2”

Search only Quick Products brand name
Quick Products QPRBAB Deluxe RV Bumper Receiver Adapter – 2”

Current price: 31.95 USD

Saving: $42.59 (57%)


Check price and availability


Height: 2.99 Inches

Length: 6.5 Inches

Width: 6.5 Inches

  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • Heavy duty constructed and black powder coated for corrosion resistance.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • Attaches to Bumper Using 4" Bolts (included). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: Designed for 4" x 4" and 4-1/2" x 4-1/2" Continuous-welded Steel Bumpers (Can be Mounted Upside Down)
  • Allows 200 Ibs Tongue Weight Capacity
  • Attention: This Accessories is NOT Intended for RV Level Towing Purpose
  • 2 set of Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down)
  • Allows 350 Ibs Tongue Weight Capacity
  • This Accessories is used for RV Level Towing Purpose
  • One-year replacement warranty
  • NOT intended for towing purposes
  • 200 lb. tongue weight capacity
  • Accepts 2” cargo carrier tube
  • Heavy-duty adapter bolts onto existing 4” x 4” RV bumper

More Info

Tulga Fifth Wheel Co RV Bumper Hitch Receiver Adapter Mount for Bike Trailer Trailer Coachman for 4" Square Continuous Welded RV Bumpers Cargo Carrier Bumpers

Search only Tulga Fifth Wheel Co brand name
Tulga Fifth Wheel Co RV Bumper Hitch Receiver Adapter Mount for Bike Trailer Trailer Coachman for 4

Current price: 26.95 USD


Check price and availability


  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • Heavy duty constructed and black powder coated for corrosion resistance.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • Attaches to Bumper Using 4" Bolts (included). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: Designed for 4" x 4" and 4-1/2" x 4-1/2" Continuous-welded Steel Bumpers (Can be Mounted Upside Down)
  • Allows 200 Ibs Tongue Weight Capacity
  • Attention: This Accessories is NOT Intended for RV Level Towing Purpose
  • 2 set of Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down)
  • Allows 350 Ibs Tongue Weight Capacity
  • This Accessories is used for RV Level Towing Purpose
  • One-year replacement warranty
  • NOT intended for towing purposes
  • 200 lb. tongue weight capacity
  • Accepts 2” cargo carrier tube
  • Heavy-duty adapter bolts onto existing 4” x 4” RV bumper
  • Warranty - Comes with 30 Days Money Back Guaranteed and Limited Lifetime Warranty.
  • Black powder coated steel with zinc plated hardware
  • Receiver Hitch Size: 2 "
  • Size/Dimensions: For 4" square continuous welded RV bumpers (can also work with bumpers 4.5" tall x 4.25" deep), accepts a 2" tube (NOT for towing)
  • U-Bolts onto a 4" square RV bumpers and accepts 2" cargo carrier and bike rack tubes

More Info

CURT 19101 Camper Hitch for 2 x 4-Inch RV Bumper, 2 in. Receiver, 3,500 lbs

Search only CURT brand name
CURT 19101 Camper Hitch for 2 x 4-Inch RV Bumper, 2 in. Receiver, 3,500 lbs

Current price: 53.95 USD


Check price and availability


Height: 6 Inches

Length: 11 Inches

Width: 9 Inches

Weight: 13 Pounds

Warranty: Limited Lifetime

  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • Heavy duty constructed and black powder coated for corrosion resistance.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • Attaches to Bumper Using 4" Bolts (included). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: Designed for 4" x 4" and 4-1/2" x 4-1/2" Continuous-welded Steel Bumpers (Can be Mounted Upside Down)
  • Allows 200 Ibs Tongue Weight Capacity
  • Attention: This Accessories is NOT Intended for RV Level Towing Purpose
  • 2 set of Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down)
  • Allows 350 Ibs Tongue Weight Capacity
  • This Accessories is used for RV Level Towing Purpose
  • One-year replacement warranty
  • NOT intended for towing purposes
  • 200 lb. tongue weight capacity
  • Accepts 2” cargo carrier tube
  • Heavy-duty adapter bolts onto existing 4” x 4” RV bumper
  • Warranty - Comes with 30 Days Money Back Guaranteed and Limited Lifetime Warranty.
  • Black powder coated steel with zinc plated hardware
  • Receiver Hitch Size: 2 "
  • Size/Dimensions: For 4" square continuous welded RV bumpers (can also work with bumpers 4.5" tall x 4.25" deep), accepts a 2" tube (NOT for towing)
  • U-Bolts onto a 4" square RV bumpers and accepts 2" cargo carrier and bike rack tubes
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

More Info

HITOWMFG RV Bumper Bike Rack Carrier Hitch Receiver Adapter for 4~4.5" Square RV Bumpers Bike Cargo Coachman

Search only HITOWMFG brand name
HITOWMFG RV Bumper Bike Rack Carrier Hitch Receiver Adapter for 4~4.5

Current price: 29.99 USD

Saving: $3.00 (9%)


Check price and availability


  • ACCESSORIES INCLUDED: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
  • 200LBS TONGUE WEIGHT CAPACITY: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
  • USE ONLY FOR 2"*2" SQUARE TUBES: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
  • STURDY & DURABLE: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
  • QUICK, EASY INSTALLATION: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you’re good to go.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • Heavy duty constructed and black powder coated for corrosion resistance.
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
  • The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • Attaches to Bumper Using 4" Bolts (included). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: Designed for 4" x 4" and 4-1/2" x 4-1/2" Continuous-welded Steel Bumpers (Can be Mounted Upside Down)
  • Allows 200 Ibs Tongue Weight Capacity
  • Attention: This Accessories is NOT Intended for RV Level Towing Purpose
  • 2 set of Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down)
  • Allows 350 Ibs Tongue Weight Capacity
  • This Accessories is used for RV Level Towing Purpose
  • One-year replacement warranty
  • NOT intended for towing purposes
  • 200 lb. tongue weight capacity
  • Accepts 2” cargo carrier tube
  • Heavy-duty adapter bolts onto existing 4” x 4” RV bumper
  • Warranty - Comes with 30 Days Money Back Guaranteed and Limited Lifetime Warranty.
  • Black powder coated steel with zinc plated hardware
  • Receiver Hitch Size: 2 "
  • Size/Dimensions: For 4" square continuous welded RV bumpers (can also work with bumpers 4.5" tall x 4.25" deep), accepts a 2" tube (NOT for towing)
  • U-Bolts onto a 4" square RV bumpers and accepts 2" cargo carrier and bike rack tubes
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2-inch x 4-inch RV bumper with the included hardware and typically just a few tools
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant Bonderite and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • PACKAGE INCLUDE. One adapter, 2 u-bolts and hardwares which is needed (pin is not include)
  • WEATHER RESISTANT. Finished in Powder coating provide durable and strong conditions, resist dust and corrosion, adds extra durability
  • ADJUSTABLE DESIGNE. It's for 4" or 4.5" continuous welded RV bumpers, the adapter takes 4 U-bolts and secures tightly around the travel trailer bumper
  • CAPACITY. 200Ib tongue weight, designed Specifically for 2" tube bicycle racks or cargo
  • 2" STANDAR FIT. This Heavy-duty square RV bumpers and accepts 2" cargo carrier and bike rack tubes

More Info

1    2    3    4    5    6    7    8    9    10