Best Radiused Corner End Mills. Reviews September, 2020

CGC Tools CEM14R4030 Primate Radiused Corner End Mill, 4 Flute, 1/4" Diameter, 3/4" LOC, 2-1/2" OAL, 0.030" Radius

Search only CGC Tools brand name
CGC Tools CEM14R4030 Primate Radiused Corner End Mill, 4 Flute, 1/4

Current price: 17.03 USD


Check price and availability


  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius

More Info

CGC Tools CEM14R2060 Primate Radiused Corner End Mill, 2 Flute, 1/4" Diameter, 3/4" LOC, 2-1/2" OAL, 0.060" Radius

Search only CGC Tools brand name
CGC Tools CEM14R2060 Primate Radiused Corner End Mill, 2 Flute, 1/4

Current price: 15.85 USD


Check price and availability


  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius

More Info

JERRAY solid Carbide Radiused Corner End Mill, HRC55 with TiAlN Coated, 4 Flutes, 1/4" Diameter, 3/4" Cutting length, 2" OAL, 0.020" Radius router bits

Search only JERRAY brand name
JERRAY solid Carbide Radiused Corner End Mill, HRC55 with TiAlN Coated, 4 Flutes, 1/4

Current price: 13.88 USD


Check price and availability


  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius
  • 2'' Overall Length, .020''Radius
  • 1/4'' Diameter, 3/4'' Length of Cut,
  • Corner Radius end mills, 4 Flutes,
  • Material: HRC55 solide Carbide
  • Brand Name:JERRAY

More Info

CGC Tools CEM18R4030TIALN Primate Radiused Corner End Mill, TiAlN Coating, 4 Flute, 1/8" Diameter, 1/2" LOC, 1-1/2" OAL, 0.030" Radius

Search only CGC Tools brand name
CGC Tools CEM18R4030TIALN Primate Radiused Corner End Mill, TiAlN Coating, 4 Flute, 1/8

Current price: 14.88 USD


Check price and availability


  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius
  • 2'' Overall Length, .020''Radius
  • 1/4'' Diameter, 3/4'' Length of Cut,
  • Corner Radius end mills, 4 Flutes,
  • Material: HRC55 solide Carbide
  • Brand Name:JERRAY
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/8'' Diameter, 1/2'' Length of Cut, 1-1/2'' Overall Length, .030''Radius, TIALN Coating

More Info

Accusize Industrial Tools 3/8'', H.S.S. Corner Rounding End Mills, 1/2'' Shank Dia, 1-1/4'' Cutter Dia, 3-1/2'' Overall Length, 1011-3878

Search only Accusize Industrial Tools brand name
Accusize Industrial Tools 3/8'', H.S.S. Corner Rounding End Mills, 1/2'' Shank Dia, 1-1/4'' Cutter Dia, 3-1/2'' Overall Length, 1011-3878

Current price: 25 USD

Saving: $1.40 (5%)


Check price and availability


Height: 1.18 Inches

Length: 4.72 Inches

Width: 1.18 Inches

Weight: 0.22 Pounds

  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius
  • 2'' Overall Length, .020''Radius
  • 1/4'' Diameter, 3/4'' Length of Cut,
  • Corner Radius end mills, 4 Flutes,
  • Material: HRC55 solide Carbide
  • Brand Name:JERRAY
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/8'' Diameter, 1/2'' Length of Cut, 1-1/2'' Overall Length, .030''Radius, TIALN Coating
  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 3/8", Shank dia.: 1/2", Largest dia.: 1-1/4", Overall length: 3-1/2"

More Info

3/8", CutsLikeButter, Carbide End Mill, 3 Flutes.020" Corner Radius, Cutting Diameter 3/8", Shank Diameter 3/8", Cutting Length 1", Full Length 2-1/2", Made in Korea…

Search only CutsLikeButter brand name
3/8

Current price: 28.21 USD


Check price and availability


  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius
  • 2'' Overall Length, .020''Radius
  • 1/4'' Diameter, 3/4'' Length of Cut,
  • Corner Radius end mills, 4 Flutes,
  • Material: HRC55 solide Carbide
  • Brand Name:JERRAY
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/8'' Diameter, 1/2'' Length of Cut, 1-1/2'' Overall Length, .030''Radius, TIALN Coating
  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 3/8", Shank dia.: 1/2", Largest dia.: 1-1/4", Overall length: 3-1/2"
  • TUNGSTEN CARBIDE - Run at high speed and have a good balance of wear resistance and toughness
  • CORNER RADIUS - Used for corner radius milling and reduce chipping of corner edges. Features excellent performance with wide chip pocket, better chip evacuation and longer tool life
  • 3 FLUTES - Outstanding performance for better rigidity with well-balanced 3 flutes. Having a sharp cutting edge for high-speed cutting and have geometry for smooth chip flow.
  • APPLICATION - Suitable for rough and finish milling in aluminum alloy
  • SIZE - Cutting Diameter 3/8", Shank Diameter 3/8", Cutting Length 1", Full Length 2-1/2"

More Info

CGC Tools CEM332R4020 Primate Radiused Corner End Mill, 4 Flute, 3/32" Diameter, 3/8" LOC, 1-1/2" OAL, 0.02" Radius

Search only CGC Tools brand name
CGC Tools CEM332R4020 Primate Radiused Corner End Mill, 4 Flute, 3/32

Current price: 12.92 USD


Check price and availability


  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius
  • 2'' Overall Length, .020''Radius
  • 1/4'' Diameter, 3/4'' Length of Cut,
  • Corner Radius end mills, 4 Flutes,
  • Material: HRC55 solide Carbide
  • Brand Name:JERRAY
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/8'' Diameter, 1/2'' Length of Cut, 1-1/2'' Overall Length, .030''Radius, TIALN Coating
  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 3/8", Shank dia.: 1/2", Largest dia.: 1-1/4", Overall length: 3-1/2"
  • TUNGSTEN CARBIDE - Run at high speed and have a good balance of wear resistance and toughness
  • CORNER RADIUS - Used for corner radius milling and reduce chipping of corner edges. Features excellent performance with wide chip pocket, better chip evacuation and longer tool life
  • 3 FLUTES - Outstanding performance for better rigidity with well-balanced 3 flutes. Having a sharp cutting edge for high-speed cutting and have geometry for smooth chip flow.
  • APPLICATION - Suitable for rough and finish milling in aluminum alloy
  • SIZE - Cutting Diameter 3/8", Shank Diameter 3/8", Cutting Length 1", Full Length 2-1/2"
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable

More Info

Cobra Carbide 19112 Micro Grain Solid Carbide Regular Length General End Mill, TiAlN Coated, 2 Flute, 30 Degrees Helix, 0.045" Radius Corner End, 3/4" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)

Search only Cobra Carbide brand name
Cobra Carbide 19112 Micro Grain Solid Carbide Regular Length General End Mill, TiAlN Coated, 2 Flute, 30 Degrees Helix, 0.045

Current price: 28.01 USD


Check price and availability


  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius
  • 2'' Overall Length, .020''Radius
  • 1/4'' Diameter, 3/4'' Length of Cut,
  • Corner Radius end mills, 4 Flutes,
  • Material: HRC55 solide Carbide
  • Brand Name:JERRAY
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/8'' Diameter, 1/2'' Length of Cut, 1-1/2'' Overall Length, .030''Radius, TIALN Coating
  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 3/8", Shank dia.: 1/2", Largest dia.: 1-1/4", Overall length: 3-1/2"
  • TUNGSTEN CARBIDE - Run at high speed and have a good balance of wear resistance and toughness
  • CORNER RADIUS - Used for corner radius milling and reduce chipping of corner edges. Features excellent performance with wide chip pocket, better chip evacuation and longer tool life
  • 3 FLUTES - Outstanding performance for better rigidity with well-balanced 3 flutes. Having a sharp cutting edge for high-speed cutting and have geometry for smooth chip flow.
  • APPLICATION - Suitable for rough and finish milling in aluminum alloy
  • SIZE - Cutting Diameter 3/8", Shank Diameter 3/8", Cutting Length 1", Full Length 2-1/2"
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Used for roughing and finishing operation
  • Corner radius gives more strength
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

Carb End Mill, 0.0600 in, 3Fl, Cc, Uncoated

Search only Micro 100 brand name
Carb End Mill, 0.0600 in, 3Fl, Cc, Uncoated

Current price: 52.95 USD


Check price and availability


Height: 0.5 Inches

Length: 2.5 Inches

Width: 0.5 Inches

  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius
  • 2'' Overall Length, .020''Radius
  • 1/4'' Diameter, 3/4'' Length of Cut,
  • Corner Radius end mills, 4 Flutes,
  • Material: HRC55 solide Carbide
  • Brand Name:JERRAY
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/8'' Diameter, 1/2'' Length of Cut, 1-1/2'' Overall Length, .030''Radius, TIALN Coating
  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 3/8", Shank dia.: 1/2", Largest dia.: 1-1/4", Overall length: 3-1/2"
  • TUNGSTEN CARBIDE - Run at high speed and have a good balance of wear resistance and toughness
  • CORNER RADIUS - Used for corner radius milling and reduce chipping of corner edges. Features excellent performance with wide chip pocket, better chip evacuation and longer tool life
  • 3 FLUTES - Outstanding performance for better rigidity with well-balanced 3 flutes. Having a sharp cutting edge for high-speed cutting and have geometry for smooth chip flow.
  • APPLICATION - Suitable for rough and finish milling in aluminum alloy
  • SIZE - Cutting Diameter 3/8", Shank Diameter 3/8", Cutting Length 1", Full Length 2-1/2"
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Used for roughing and finishing operation
  • Corner radius gives more strength
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Power Cutting & Sawing
  • Country of manufacture: United States
  • Manufacturer: Micro 100

More Info

CGC Tools CEM116R4010 Primate Radiused Corner End Mill, 4 Flute, 1/16" Diameter, 1/4" LOC, 1-1/2" OAL, .010" Radius

Search only CGC Tools brand name
CGC Tools CEM116R4010 Primate Radiused Corner End Mill, 4 Flute, 1/16

Current price: 14.59 USD


Check price and availability


  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .030''Radius
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 2 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length, .060''Radius
  • 2'' Overall Length, .020''Radius
  • 1/4'' Diameter, 3/4'' Length of Cut,
  • Corner Radius end mills, 4 Flutes,
  • Material: HRC55 solide Carbide
  • Brand Name:JERRAY
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/8'' Diameter, 1/2'' Length of Cut, 1-1/2'' Overall Length, .030''Radius, TIALN Coating
  • Right hand cut. Formed radius cutter.
  • High Speed Steel
  • Intended for use in milling rounded corners
  • Rad.: 3/8", Shank dia.: 1/2", Largest dia.: 1-1/4", Overall length: 3-1/2"
  • TUNGSTEN CARBIDE - Run at high speed and have a good balance of wear resistance and toughness
  • CORNER RADIUS - Used for corner radius milling and reduce chipping of corner edges. Features excellent performance with wide chip pocket, better chip evacuation and longer tool life
  • 3 FLUTES - Outstanding performance for better rigidity with well-balanced 3 flutes. Having a sharp cutting edge for high-speed cutting and have geometry for smooth chip flow.
  • APPLICATION - Suitable for rough and finish milling in aluminum alloy
  • SIZE - Cutting Diameter 3/8", Shank Diameter 3/8", Cutting Length 1", Full Length 2-1/2"
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • Used for roughing and finishing operation
  • Corner radius gives more strength
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Power Cutting & Sawing
  • Country of manufacture: United States
  • Manufacturer: Micro 100
  • This weapon of mass production destroy any competition
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
  • Extremely versatile in various materials, center cutting, solid sub-micron carbide
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
  • USA, Radius, 4 Flute, 1/16'' Diameter, 1/4'' Length of Cut, 1-1/2'' Overall Length, .010''Radius

More Info

1    2    3    4    5    6    7    8    9    10