Best Router Bearings . Reviews August, 2020

Yakamoz 10Pcs Router Bits Top Mounted Ball Bearings Guide for Router Bit Bearing Repairing Replacement Accessory Kit | Inner Dia. 3/16” & Overall Dia. 1/2”

Search only YAKAMOZ brand name
Yakamoz 10Pcs Router Bits Top Mounted Ball Bearings Guide for Router Bit Bearing Repairing Replacement Accessory Kit | Inner Dia. 3/16” & Overall Dia. 1/2”

Current price: 11.99 USD

Saving: $7.00 (37%)


Check price and availability


  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”

More Info

Yakamoz 7PCS Multi-Rabbet Top Mounted Bearings Replacement Kit Rabbeting Router Bit Ball Bearing Guide Set | Inner Dia. 3/16” & Overall Dia. 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"

Search only YAKAMOZ brand name
Yakamoz 7PCS Multi-Rabbet Top Mounted Bearings Replacement Kit Rabbeting Router Bit Ball Bearing Guide Set | Inner Dia. 3/16” & Overall Dia. 3/8

Current price: 14.99 USD

Saving: $7.00 (32%)


Check price and availability


  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"

More Info

Wolfride 10Pcs Router Bit Bearing Set Top Bearings for Flush Trim Router Bit|Interior Dia: 3/16” & Outer Dia: 1/2”

Search only Wolfride brand name
Wolfride 10Pcs Router Bit Bearing Set Top Bearings for Flush Trim Router Bit|Interior Dia: 3/16” & Outer Dia: 1/2”

Current price: 9.98 USD


Check price and availability


  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"
  • Made of high quality carbide steel, please wear gloves for longer service life when using.
  • Containing bearings, set screws and hex key wrenches.
  • With the bearings, create a different depths or widths groove in the board.
  • Use the bearings to repair your router bits if the top bearing in your router bit is broken.
  • Top mounted router bit bearings, interior diameter: 3/16”, outer diameter: 1/2”.

More Info

Yakamoz 5-Set Router Bit Bearings Replacement Kit Bottom Mounted Ball Bearing Guide Fits 1/4 Inch Shank Router Bits | Inner Dia. 1/4” & Outer Dia. 1/2”, Fixed Collar Included

Search only YAKAMOZ brand name
Yakamoz 5-Set Router Bit Bearings Replacement Kit Bottom Mounted Ball Bearing Guide Fits 1/4 Inch Shank Router Bits | Inner Dia. 1/4” & Outer Dia. 1/2”, Fixed Collar Included

Current price: 9.99 USD

Saving: $9.00 (47%)


Check price and availability


  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"
  • Made of high quality carbide steel, please wear gloves for longer service life when using.
  • Containing bearings, set screws and hex key wrenches.
  • With the bearings, create a different depths or widths groove in the board.
  • Use the bearings to repair your router bits if the top bearing in your router bit is broken.
  • Top mounted router bit bearings, interior diameter: 3/16”, outer diameter: 1/2”.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Replace or repair the damaged or lost router bit bearings.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”

More Info

Whiteside Router Bits BB501 5 Piece Bearing

Search only Whiteside Router Bits brand name
Whiteside Router Bits BB501 5 Piece Bearing

Current price: 15.04 USD


Check price and availability


Height: 5.5 Inches

Length: 2 Inches

Width: 3 Inches

  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"
  • Made of high quality carbide steel, please wear gloves for longer service life when using.
  • Containing bearings, set screws and hex key wrenches.
  • With the bearings, create a different depths or widths groove in the board.
  • Use the bearings to repair your router bits if the top bearing in your router bit is broken.
  • Top mounted router bit bearings, interior diameter: 3/16”, outer diameter: 1/2”.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Replace or repair the damaged or lost router bit bearings.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide

More Info

Eyech 5pc 1/4 inch The Shank with Bearings Accessory Kit Ball Bearing for Router Bit -Interior:6.35MM Outer:12.7MM

Search only Eyech brand name
Eyech 5pc 1/4 inch The Shank with Bearings Accessory Kit Ball Bearing for Router Bit -Interior:6.35MM Outer:12.7MM

Current price: 8.59 USD

Saving: $5.97 (41%)


Check price and availability


  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"
  • Made of high quality carbide steel, please wear gloves for longer service life when using.
  • Containing bearings, set screws and hex key wrenches.
  • With the bearings, create a different depths or widths groove in the board.
  • Use the bearings to repair your router bits if the top bearing in your router bit is broken.
  • Top mounted router bit bearings, interior diameter: 3/16”, outer diameter: 1/2”.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Replace or repair the damaged or lost router bit bearings.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • Shielded to keep out unwanted wood dust and ships that greatly reduce bearing life
  • Replace or repair the damaged or lost router bit bearings
  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Made from Solid Alloy Steel,industrial quality, fast and easy to use
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”

More Info

ZokMok 1/4 Shank Carbide Pattern Flush Trim Template Router bits Set, Straight Flush Trim Bearing Router Bits with 2 regluar Blades, Prevent Tear-Out, Perfectly Suitable for Light Work

Search only brand name
ZokMok 1/4 Shank Carbide Pattern Flush Trim Template Router bits Set, Straight Flush Trim Bearing Router Bits with 2 regluar Blades, Prevent Tear-Out, Perfectly Suitable for Light Work

Current price: 19.88 USD

Saving: $7.11 (26%)


Check price and availability


  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"
  • Made of high quality carbide steel, please wear gloves for longer service life when using.
  • Containing bearings, set screws and hex key wrenches.
  • With the bearings, create a different depths or widths groove in the board.
  • Use the bearings to repair your router bits if the top bearing in your router bit is broken.
  • Top mounted router bit bearings, interior diameter: 3/16”, outer diameter: 1/2”.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Replace or repair the damaged or lost router bit bearings.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • Shielded to keep out unwanted wood dust and ships that greatly reduce bearing life
  • Replace or repair the damaged or lost router bit bearings
  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Made from Solid Alloy Steel,industrial quality, fast and easy to use
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • 【Quality Assurance】Provide 100% after-sales service, please contact us in time if there is an issue with the product.
  • 【Use Range】The Pattern bit suitable for Woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
  • 【High Quality】C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Heat resistant Teflon coating. When using the Router Bit, avoid collision between the alloy blade and the hard surface (cement floor or metal surface)!
  • 【Smoother Cut】The flush triming bit have 2 regluar blades can be especially handy in a router table so that the template runs on the bearing allowing you to cut with the grain smooothly and prevent tear-out.
  • 【Carbide Blade length】11.9mm, 20mm, 25mm, 38mm.

More Info

Yakamoz 1/4 Inch Shank Rabbet Router Bit with 6 Bearings Set | 1/8", 1/4", 5/16", 3/8", 7/16", 1/2" Bearings

Search only YAKAMOZ brand name
Yakamoz 1/4 Inch Shank Rabbet Router Bit with 6 Bearings Set | 1/8

Current price: 17.99 USD

Saving: $11.00 (38%)


Check price and availability


Weight: 0.35494424182 Pounds

  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"
  • Made of high quality carbide steel, please wear gloves for longer service life when using.
  • Containing bearings, set screws and hex key wrenches.
  • With the bearings, create a different depths or widths groove in the board.
  • Use the bearings to repair your router bits if the top bearing in your router bit is broken.
  • Top mounted router bit bearings, interior diameter: 3/16”, outer diameter: 1/2”.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Replace or repair the damaged or lost router bit bearings.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • Shielded to keep out unwanted wood dust and ships that greatly reduce bearing life
  • Replace or repair the damaged or lost router bit bearings
  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Made from Solid Alloy Steel,industrial quality, fast and easy to use
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • 【Quality Assurance】Provide 100% after-sales service, please contact us in time if there is an issue with the product.
  • 【Use Range】The Pattern bit suitable for Woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
  • 【High Quality】C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Heat resistant Teflon coating. When using the Router Bit, avoid collision between the alloy blade and the hard surface (cement floor or metal surface)!
  • 【Smoother Cut】The flush triming bit have 2 regluar blades can be especially handy in a router table so that the template runs on the bearing allowing you to cut with the grain smooothly and prevent tear-out.
  • 【Carbide Blade length】11.9mm, 20mm, 25mm, 38mm.
  • Solid Hardened Steel Bodies with Anti-Kickback Design
  • Cuts all composition materials, plywoods, hardwoods, and softwoods
  • Use on hand-held and table-mounted portable routers
  • Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces
  • 1-3/8 inch diameter with 6 bearings (1/8", 1/4", 5/16", 3/8", 7/16" and 1/2")

More Info

KOWOOD 1/4” Inch Shank 1-3/8” Height Multi Rabbet Router Bit Set (6 bearings Multiple Depths 1/8", 1/4", 5/16", 3/8", 7/16", 1/2") interchangeable and adjustable bearing.

Search only KOWOOD brand name
KOWOOD 1/4” Inch Shank 1-3/8” Height Multi Rabbet Router Bit Set (6 bearings Multiple Depths 1/8

Current price: 19.75 USD


Check price and availability


Height: 1.97 Inches

Length: 2.76 Inches

Width: 4.13 Inches

Weight: 0.44 Pounds

  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"
  • Made of high quality carbide steel, please wear gloves for longer service life when using.
  • Containing bearings, set screws and hex key wrenches.
  • With the bearings, create a different depths or widths groove in the board.
  • Use the bearings to repair your router bits if the top bearing in your router bit is broken.
  • Top mounted router bit bearings, interior diameter: 3/16”, outer diameter: 1/2”.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Replace or repair the damaged or lost router bit bearings.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • Shielded to keep out unwanted wood dust and ships that greatly reduce bearing life
  • Replace or repair the damaged or lost router bit bearings
  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Made from Solid Alloy Steel,industrial quality, fast and easy to use
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • 【Quality Assurance】Provide 100% after-sales service, please contact us in time if there is an issue with the product.
  • 【Use Range】The Pattern bit suitable for Woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
  • 【High Quality】C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Heat resistant Teflon coating. When using the Router Bit, avoid collision between the alloy blade and the hard surface (cement floor or metal surface)!
  • 【Smoother Cut】The flush triming bit have 2 regluar blades can be especially handy in a router table so that the template runs on the bearing allowing you to cut with the grain smooothly and prevent tear-out.
  • 【Carbide Blade length】11.9mm, 20mm, 25mm, 38mm.
  • Solid Hardened Steel Bodies with Anti-Kickback Design
  • Cuts all composition materials, plywoods, hardwoods, and softwoods
  • Use on hand-held and table-mounted portable routers
  • Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces
  • 1-3/8 inch diameter with 6 bearings (1/8", 1/4", 5/16", 3/8", 7/16" and 1/2")
  • ✔Kindly reminder for our customer checks the shank size for your router takes to avoid ordering in mistake. All dimensions and weight are in description below
  • ✔Reliable Router bit for DIYer and 100% satisfy to experienced woodsmith. Specify for rabbet cuts in the wood work project for any art or craft
  • ✔Problem-free Router bit, it is suitable for all range’s router such as handheld router and table router
  • ✔High-grade carbide maximum strength and durable. Shank is to manufacturing precision measurement with a quality check to minimum tolerance and vibration during spinning
  • ✔1-3/8” Height, interchangeable bearing in 6 different depths (1/8", 1/4", 5/16", 3/8", 7/16", 1/2") with 1/4” shank High performance Rabbet Router Bit

More Info

Yonico 14705q 1/2-Inch Height with 6 Bearings Rabbet Router Bit & Bearing Set 1/4-Inch Shank

Search only Yonico brand name
Yonico 14705q 1/2-Inch Height with 6 Bearings Rabbet Router Bit & Bearing Set 1/4-Inch Shank

Current price: 23.95 USD


Check price and availability


Height: 2 Inches

Length: 4 Inches

Width: 3.75 Inches

Weight: 0.5952481074 Pounds

  • Made of high quality carbide steel for low noise and long service life.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1/2”
  • Lubricated with high temperature lubricant to withstands the stresses of Turing at 22,000 RPMs.
  • Kit contains the most commonly used bearings offer 7 different rabbeting depth work with your rabbet router bits.
  • This kit allows you to change the depth of your rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.
  • The bearing repair kit contains all the necessary bearings, set screws and hex key wrenches to replace or repair most any damaged or lost router bit bearings.
  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8"
  • Made of high quality carbide steel, please wear gloves for longer service life when using.
  • Containing bearings, set screws and hex key wrenches.
  • With the bearings, create a different depths or widths groove in the board.
  • Use the bearings to repair your router bits if the top bearing in your router bit is broken.
  • Top mounted router bit bearings, interior diameter: 3/16”, outer diameter: 1/2”.
  • Metal shields on both sides to keep out unwanted wood dust and chips to make bearing longer working life.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price.
  • Replace or repair the damaged or lost router bit bearings.
  • Deep groove geometry for supporting both radial and axial loads and high speeds.
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • Industrial Quality
  • Precision ground for proper balance at high RPM
  • Whiteside Router Bits are made with Premium Carbide
  • Shielded to keep out unwanted wood dust and ships that greatly reduce bearing life
  • Replace or repair the damaged or lost router bit bearings
  • Deep groove geometry for supporting both radial and axial loads and high speeds
  • Made from Solid Alloy Steel,industrial quality, fast and easy to use
  • Bearing Type: Bottom Mounted, Inner Diameter: 1/4”, Outer Diameter: 1/2”
  • 【Quality Assurance】Provide 100% after-sales service, please contact us in time if there is an issue with the product.
  • 【Use Range】The Pattern bit suitable for Woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials.
  • 【High Quality】C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Heat resistant Teflon coating. When using the Router Bit, avoid collision between the alloy blade and the hard surface (cement floor or metal surface)!
  • 【Smoother Cut】The flush triming bit have 2 regluar blades can be especially handy in a router table so that the template runs on the bearing allowing you to cut with the grain smooothly and prevent tear-out.
  • 【Carbide Blade length】11.9mm, 20mm, 25mm, 38mm.
  • Solid Hardened Steel Bodies with Anti-Kickback Design
  • Cuts all composition materials, plywoods, hardwoods, and softwoods
  • Use on hand-held and table-mounted portable routers
  • Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces
  • 1-3/8 inch diameter with 6 bearings (1/8", 1/4", 5/16", 3/8", 7/16" and 1/2")
  • ✔Kindly reminder for our customer checks the shank size for your router takes to avoid ordering in mistake. All dimensions and weight are in description below
  • ✔Reliable Router bit for DIYer and 100% satisfy to experienced woodsmith. Specify for rabbet cuts in the wood work project for any art or craft
  • ✔Problem-free Router bit, it is suitable for all range’s router such as handheld router and table router
  • ✔High-grade carbide maximum strength and durable. Shank is to manufacturing precision measurement with a quality check to minimum tolerance and vibration during spinning
  • ✔1-3/8” Height, interchangeable bearing in 6 different depths (1/8", 1/4", 5/16", 3/8", 7/16", 1/2") with 1/4” shank High performance Rabbet Router Bit
  • Satisfaction Guaranteed & Limited Lifetime Warranty
  • Silver induction brazing for maximum strength and durability
  • For use on table mount and handheld router
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
  • Cut 1/2" rabbets in a variety of depths up to 1/2" deep

More Info

1    2    3    4    5    6    7    8    9    10