Best Router Fences. Reviews April, 2020

Kreg PRS1015 Router Table Fence

Search only KREG brand name
Kreg PRS1015 Router Table Fence

Current price: 199 USD


Check price and availability


Height: 8 Inches

Length: 38.75 Inches

Width: 4 Inches

Weight: 6.5 Pounds

  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks

More Info

Taytools 300016 Deluxe 24 Inches Long Router Table Fence 3-1/2 Inches Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port

Search only Taytools brand name
Taytools 300016 Deluxe 24 Inches Long Router Table Fence 3-1/2 Inches Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port

Current price: 79.99 USD


Check price and availability


  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.

More Info

Woodpeckers Precision Woodworking Tools SF-36SINGLE Single Offset Super Fence, 36-Inch

Search only Woodpeckers brand name
Woodpeckers Precision Woodworking Tools SF-36SINGLE Single Offset Super Fence, 36-Inch

Current price: 250.99 USD


Check price and availability


Height: 5 Inches

Length: 39.5 Inches

Width: 5 Inches

Weight: 18 Pounds

  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
  • Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
  • Variable throat capabilities to handle router bits up to 4-inches in diameter
  • Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
  • The two fence halves automatically line up perfectly parallel when tightened down
  • Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch

More Info

JessEm Mast-R-Fence III Model 04400

Search only JessEm brand name
JessEm Mast-R-Fence III Model 04400

Current price: 264.9 USD

Saving: $35.09 (12%)


Check price and availability


Height: 10 Inches

Length: 12 Inches

Width: 10 Inches

Weight: 10 Pounds

  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
  • Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
  • Variable throat capabilities to handle router bits up to 4-inches in diameter
  • Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
  • The two fence halves automatically line up perfectly parallel when tightened down
  • Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch
  • All the fasteners and other components on this fence are stainless steel. The high boy ergonomical knobs are now machined aluminum instead of plastic like on the Mast-R-Fence II.
  • The dust port is still the same as the Mast-R-Fence II that is designed with an inside diameter or 2-1/4 vacuum hose fitting and an outside diameter 2-1/2
  • The fence is also within a tolerance of 0.004
  • The shimming bars are laser engraved for 1/32 and 1/16.
  • Made 100% in Canada. The fence faces are machined Maple compared to MDF fence faces scene on every other fence on the market.

More Info

JessEm 4010 Master Fence II

Search only JessEm Tool Company brand name
JessEm 4010 Master Fence II

Current price: 269 USD


Check price and availability


Height: 7 Inches

Length: 39 Inches

Width: 7 Inches

Weight: 16.44 Pounds

Warranty: 1 year

  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
  • Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
  • Variable throat capabilities to handle router bits up to 4-inches in diameter
  • Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
  • The two fence halves automatically line up perfectly parallel when tightened down
  • Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch
  • All the fasteners and other components on this fence are stainless steel. The high boy ergonomical knobs are now machined aluminum instead of plastic like on the Mast-R-Fence II.
  • The dust port is still the same as the Mast-R-Fence II that is designed with an inside diameter or 2-1/4 vacuum hose fitting and an outside diameter 2-1/2
  • The fence is also within a tolerance of 0.004
  • The shimming bars are laser engraved for 1/32 and 1/16.
  • Made 100% in Canada. The fence faces are machined Maple compared to MDF fence faces scene on every other fence on the market.
  • 1/32" and 1/16" shimming/offset bars standard
  • Tool free fence adjustments
  • Side mounted fence tracks with built in scales
  • Fully adjustable fence faces with quick locking knobs
  • Heavy duty aluminum extruded fence frame

More Info

ROUTER FENCE W/O DUST PORT

Search only brand name
ROUTER FENCE W/O DUST PORT

Current price: 119.99 USD


Check price and availability


  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
  • Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
  • Variable throat capabilities to handle router bits up to 4-inches in diameter
  • Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
  • The two fence halves automatically line up perfectly parallel when tightened down
  • Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch
  • All the fasteners and other components on this fence are stainless steel. The high boy ergonomical knobs are now machined aluminum instead of plastic like on the Mast-R-Fence II.
  • The dust port is still the same as the Mast-R-Fence II that is designed with an inside diameter or 2-1/4 vacuum hose fitting and an outside diameter 2-1/2
  • The fence is also within a tolerance of 0.004
  • The shimming bars are laser engraved for 1/32 and 1/16.
  • Made 100% in Canada. The fence faces are machined Maple compared to MDF fence faces scene on every other fence on the market.
  • 1/32" and 1/16" shimming/offset bars standard
  • Tool free fence adjustments
  • Side mounted fence tracks with built in scales
  • Fully adjustable fence faces with quick locking knobs
  • Heavy duty aluminum extruded fence frame

More Info

SawStop RT-F27 27" Fence Assembly For RT

Search only SawStop brand name
SawStop RT-F27 27

Current price: 149 USD


Check price and availability


Height: 5 Inches

Length: 5 Inches

Width: 32 Inches

Weight: 10 Pounds

  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
  • Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
  • Variable throat capabilities to handle router bits up to 4-inches in diameter
  • Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
  • The two fence halves automatically line up perfectly parallel when tightened down
  • Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch
  • All the fasteners and other components on this fence are stainless steel. The high boy ergonomical knobs are now machined aluminum instead of plastic like on the Mast-R-Fence II.
  • The dust port is still the same as the Mast-R-Fence II that is designed with an inside diameter or 2-1/4 vacuum hose fitting and an outside diameter 2-1/2
  • The fence is also within a tolerance of 0.004
  • The shimming bars are laser engraved for 1/32 and 1/16.
  • Made 100% in Canada. The fence faces are machined Maple compared to MDF fence faces scene on every other fence on the market.
  • 1/32" and 1/16" shimming/offset bars standard
  • Tool free fence adjustments
  • Side mounted fence tracks with built in scales
  • Fully adjustable fence faces with quick locking knobs
  • Heavy duty aluminum extruded fence frame
  • This fence assembly features two adjustable faces with shims and adjustable scales
  • Dust port: 2.25" diameter
  • Compatible with various routing Accessories like feather boards, flip stops and more

More Info

JESSEM Clear-Cut Precision Stock Guides, JessEm# 04215

Search only JessEm brand name
JESSEM Clear-Cut Precision Stock Guides, JessEm# 04215

Current price: 99.95 USD


Check price and availability


Height: 2.2 Inches

Length: 6.1 Inches

Width: 5.4 Inches

  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
  • Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
  • Variable throat capabilities to handle router bits up to 4-inches in diameter
  • Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
  • The two fence halves automatically line up perfectly parallel when tightened down
  • Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch
  • All the fasteners and other components on this fence are stainless steel. The high boy ergonomical knobs are now machined aluminum instead of plastic like on the Mast-R-Fence II.
  • The dust port is still the same as the Mast-R-Fence II that is designed with an inside diameter or 2-1/4 vacuum hose fitting and an outside diameter 2-1/2
  • The fence is also within a tolerance of 0.004
  • The shimming bars are laser engraved for 1/32 and 1/16.
  • Made 100% in Canada. The fence faces are machined Maple compared to MDF fence faces scene on every other fence on the market.
  • 1/32" and 1/16" shimming/offset bars standard
  • Tool free fence adjustments
  • Side mounted fence tracks with built in scales
  • Fully adjustable fence faces with quick locking knobs
  • Heavy duty aluminum extruded fence frame
  • This fence assembly features two adjustable faces with shims and adjustable scales
  • Dust port: 2.25" diameter
  • Compatible with various routing Accessories like feather boards, flip stops and more
  • Includes one infeed stock guide, one outfeed stock guide and detailed instructions
  • 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
  • Includes one infeed stock guide, one outfeed stock guide and detailed instructions
  • 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
  • Unique roller system holds down workpiece and pushes into fence for precision stock feed

More Info

32" L Table Fence Pre-drilled By Peachtree Woodworking - PW1098

Search only Peachtree Woodworking Supply brand name
32

Current price: 29.99 USD


Check price and availability


Height: 0.13 Inches

Length: 32 Inches

Width: 3 Inches

Weight: 2.20462262 Pounds

  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
  • Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
  • Variable throat capabilities to handle router bits up to 4-inches in diameter
  • Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
  • The two fence halves automatically line up perfectly parallel when tightened down
  • Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch
  • All the fasteners and other components on this fence are stainless steel. The high boy ergonomical knobs are now machined aluminum instead of plastic like on the Mast-R-Fence II.
  • The dust port is still the same as the Mast-R-Fence II that is designed with an inside diameter or 2-1/4 vacuum hose fitting and an outside diameter 2-1/2
  • The fence is also within a tolerance of 0.004
  • The shimming bars are laser engraved for 1/32 and 1/16.
  • Made 100% in Canada. The fence faces are machined Maple compared to MDF fence faces scene on every other fence on the market.
  • 1/32" and 1/16" shimming/offset bars standard
  • Tool free fence adjustments
  • Side mounted fence tracks with built in scales
  • Fully adjustable fence faces with quick locking knobs
  • Heavy duty aluminum extruded fence frame
  • This fence assembly features two adjustable faces with shims and adjustable scales
  • Dust port: 2.25" diameter
  • Compatible with various routing Accessories like feather boards, flip stops and more
  • Includes one infeed stock guide, one outfeed stock guide and detailed instructions
  • 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
  • Includes one infeed stock guide, one outfeed stock guide and detailed instructions
  • 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
  • Unique roller system holds down workpiece and pushes into fence for precision stock feed
  • Can be used with all kinds of shop built jigs & tables
  • Can mount on a drill press table, router table, band saw fence & many other tools
  • 32-inch Fence has two 1/4-Inch slots for mounting & center hole cut out
  • L Shaped aluminum ready to mount on the router table or other setups

More Info

JessEm 04400 Mast-R-Fence III + 04550 Router Fence Micro Adjuster

Search only JessEm brand name
JessEm 04400 Mast-R-Fence III + 04550 Router Fence Micro Adjuster

Current price: 389 USD


Check price and availability


Height: 10 Inches

Length: 20 Inches

Width: 10 Inches

Weight: 10 Pounds

  • Precision measuring system with micro-adjust
  • Features a measuring scale that allows you to position the fence and make adjustments
  • A large paddle lock on the infeed end, and a quarter-turn lock on the out feed end
  • The fence adjusts easily with just one hand, and locks firmly in place with dual locks
  • Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
  • T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
  • Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
  • The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
  • Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
  • Vertical section is nearly 4-inches high and contains 4 t-slots, including one along the top edge
  • Variable throat capabilities to handle router bits up to 4-inches in diameter
  • Dust collection port to fit 2-1/4-inch and 2-1/2-inch hose
  • The two fence halves automatically line up perfectly parallel when tightened down
  • Micro-adjustable offset capabilities allow you to set an offset of any amount up to 1/4-inch
  • All the fasteners and other components on this fence are stainless steel. The high boy ergonomical knobs are now machined aluminum instead of plastic like on the Mast-R-Fence II.
  • The dust port is still the same as the Mast-R-Fence II that is designed with an inside diameter or 2-1/4 vacuum hose fitting and an outside diameter 2-1/2
  • The fence is also within a tolerance of 0.004
  • The shimming bars are laser engraved for 1/32 and 1/16.
  • Made 100% in Canada. The fence faces are machined Maple compared to MDF fence faces scene on every other fence on the market.
  • 1/32" and 1/16" shimming/offset bars standard
  • Tool free fence adjustments
  • Side mounted fence tracks with built in scales
  • Fully adjustable fence faces with quick locking knobs
  • Heavy duty aluminum extruded fence frame
  • This fence assembly features two adjustable faces with shims and adjustable scales
  • Dust port: 2.25" diameter
  • Compatible with various routing Accessories like feather boards, flip stops and more
  • Includes one infeed stock guide, one outfeed stock guide and detailed instructions
  • 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
  • Includes one infeed stock guide, one outfeed stock guide and detailed instructions
  • 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
  • Unique roller system holds down workpiece and pushes into fence for precision stock feed
  • Can be used with all kinds of shop built jigs & tables
  • Can mount on a drill press table, router table, band saw fence & many other tools
  • 32-inch Fence has two 1/4-Inch slots for mounting & center hole cut out
  • L Shaped aluminum ready to mount on the router table or other setups
  • Combo of both items - bundle and save!
  • Made from high quality materials and built to last. Maple, stainless steel and 6061 aluminum
  • The brand new Micro Adjuster #04550
  • The all new Mast-R-Fence III #04400
  • Made in Canada!

More Info

1    2    3    4    5    6    7    8    9    10