Best Safety Harnesses. Reviews August, 2020

Guardian Fall Protection 11173 M-L Seraph Construction Harness with Side D-Rings

Search only Guardian Fall Protection brand name
Guardian Fall Protection 11173 M-L Seraph Construction Harness with Side D-Rings

Current price: 69.99 USD

Saving: $46.98 (40%)


Check price and availability


Height: 13 Inches

Length: 25 Inches

Width: 13 Inches

Weight: 5.5 Pounds

Warranty: Guardian Fall Protection warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. Obligation under this warranty is limited to product replacement for the period of (2) years from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty is not transferable. No other person or firm is authorized to assume or assign for Guardian Fall Protection any other liability in connection with the sale or use of our products. Furthermore, this warranty is void if any product is changed or altered in any way or if the product is used in a manner other than for which it is intended. This warranty only covers defects in material and workmanship; it does not cover conditions resulting from normal wear and tear, neglect, abuse or accident. All returns to Guardian Fall Protection must have a return authorization which is obtained from our Customer Service department. All returns must be shipped prepaid.

  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles

More Info

KwikSafety (Charlotte, NC) SCORPION Safety Harness w/attached 6ft. Tubular Lanyard on back | OSHA ANSI Fall Protection | INTERNAL Shock Absorbing Lanyard | Construction Carpenter Scaffolding

Search only KwikSafety brand name
KwikSafety (Charlotte, NC) SCORPION Safety Harness w/attached 6ft. Tubular Lanyard on back | OSHA ANSI Fall Protection | INTERNAL Shock Absorbing Lanyard | Construction Carpenter Scaffolding

Current price: 49.99 USD


Check price and availability


  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.

More Info

KwikSafety (Charlotte, NC) THUNDER 3D Ring Safety Harness (Pass Through Connectors) OSHA ANSI Industrial Full Body Fall Protection Personal Equipment Construction Carpenter Scaffold Contractor

Search only KwikSafety brand name
KwikSafety (Charlotte, NC) THUNDER 3D Ring Safety Harness (Pass Through Connectors) OSHA ANSI Industrial Full Body Fall Protection Personal Equipment Construction Carpenter Scaffold Contractor

Current price: 36.99 USD


Check price and availability


Height: 10.6 Inches

Length: 14.2 Inches

Width: 8 Inches

Weight: 0.41 Pounds

  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!

More Info

WELKFORDER 1D-Ring Industrial Fall Protection Safety Harness with 6-Foot Shock Absorber Stretchable Lanyard [Snap Hook End] | Permanent attached Kit | ANSI Compliant Personal Fall Arrest System(PFAS)

Search only WELKFORDER brand name
WELKFORDER 1D-Ring Industrial Fall Protection Safety Harness with 6-Foot Shock Absorber Stretchable Lanyard [Snap Hook End] | Permanent attached Kit | ANSI Compliant Personal Fall Arrest System(PFAS)

Current price: 49.99 USD

Saving: $20.00 (29%)


Check price and availability


Weight: 4.3 Pounds

  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Nonwoven Bag.

More Info

KwikSafety (Charlotte, NC) SUPERCELL Safety Harness | ANSI OSHA Full Body Personal Fall Protection | Dorsal Ring Side D-Rings Grommet Tongue Buckle Straps Tool Lanyard Construction Tower Roofing

Search only KwikSafety brand name
KwikSafety (Charlotte, NC) SUPERCELL Safety Harness | ANSI OSHA Full Body Personal Fall Protection | Dorsal Ring Side D-Rings Grommet Tongue Buckle Straps Tool Lanyard Construction Tower Roofing

Current price: 49.99 USD


Check price and availability


  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Nonwoven Bag.
  • OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
  • ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
  • SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing tongue buckle straps of our SUPRECELL 3D Universal Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
  • REDUCE THE FEAR FACTOR: One (1) back dorsal ring and two (2) side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring is primarily used for fall arrest & can be used for travel restraint or rescue. Back support and shoulder paddings have been added to the design in order to prevent injury and provide comfort if a fall were to occur.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SUPERCELL | 3D Full Body Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, make sure all pass-through connectors on all 5 adjustment points are connected and aligned, the leg and shoulder straps are snug, and chest straps are in the center of the chest area.

More Info

Miller DuraFlex Python Ultra Full-Body Safety Harness with Tubular Webbing & Side D-Rings, Universal Size-Large/XL, 400 lb. Capacity (P950QC-7/UGN)

Search only Honeywell brand name
Miller DuraFlex Python Ultra Full-Body Safety Harness with Tubular Webbing & Side D-Rings, Universal Size-Large/XL, 400 lb. Capacity (P950QC-7/UGN)

Current price: 153.32 USD

Saving: $21.85 (12%)


Check price and availability


Height: 4.5 Inches

Length: 11 Inches

Width: 8.5 Inches

Weight: 3.4 Pounds

  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Nonwoven Bag.
  • OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
  • ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
  • SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing tongue buckle straps of our SUPRECELL 3D Universal Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
  • REDUCE THE FEAR FACTOR: One (1) back dorsal ring and two (2) side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring is primarily used for fall arrest & can be used for travel restraint or rescue. Back support and shoulder paddings have been added to the design in order to prevent injury and provide comfort if a fall were to occur.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SUPERCELL | 3D Full Body Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, make sure all pass-through connectors on all 5 adjustment points are connected and aligned, the leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • FALL INDICATOR/WARNING FLAG: Deploys after fall to indicate the safety harness should be removed from service; solid color leg straps for easy donning; rated to 400-lbs. (181.4 kg)
  • SELF-CONTAINED LABEL PACK: encapsulates labels to minimize damage and loss; integrated, pull-free lanyard rings minimizes hazard of lanyard hanging freely; tool belt loops for easy attachment
  • SLIDING BACK D-RING: Made of forged steel for strength; soft, flexible Santoprene D-ring back pad enhances comfort; side-positioning D-rings; sub-pelvic strap distributes weight for support after fall
  • FULLY ADJUSTABLE DESIGN: Features DuraFlex Python webbing in lower torso for greater flexibility, mobility and less fatigue; quick-connect webbing strap buckles at legs and chest for easy on/off
  • CUSHIONED TUBULAR WEBBING: Features friction buckle & contoured-edge shoulder straps to minimize neck/shoulder discomfort when wearing a tool belt; high-density, abrasion-resistant and water-repellent

More Info

WELKFORDER 3D-Rings Industrial Fall Protection Safety Harness With Waist Tounge Buckle | Leg Tounge Buckles | Waist & Shoulder Pad Support ANSI Certified Full Body Personal Protection Equipment

Search only WELKFORDER brand name
WELKFORDER 3D-Rings Industrial Fall Protection Safety Harness With Waist Tounge Buckle | Leg Tounge Buckles | Waist & Shoulder Pad Support ANSI Certified Full Body Personal Protection Equipment

Current price: 69.99 USD


Check price and availability


Height: 4.1 Inches

Length: 15.8 Inches

Width: 11.6 Inches

Weight: 5.6 Pounds

  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Nonwoven Bag.
  • OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
  • ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
  • SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing tongue buckle straps of our SUPRECELL 3D Universal Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
  • REDUCE THE FEAR FACTOR: One (1) back dorsal ring and two (2) side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring is primarily used for fall arrest & can be used for travel restraint or rescue. Back support and shoulder paddings have been added to the design in order to prevent injury and provide comfort if a fall were to occur.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SUPERCELL | 3D Full Body Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, make sure all pass-through connectors on all 5 adjustment points are connected and aligned, the leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • FALL INDICATOR/WARNING FLAG: Deploys after fall to indicate the safety harness should be removed from service; solid color leg straps for easy donning; rated to 400-lbs. (181.4 kg)
  • SELF-CONTAINED LABEL PACK: encapsulates labels to minimize damage and loss; integrated, pull-free lanyard rings minimizes hazard of lanyard hanging freely; tool belt loops for easy attachment
  • SLIDING BACK D-RING: Made of forged steel for strength; soft, flexible Santoprene D-ring back pad enhances comfort; side-positioning D-rings; sub-pelvic strap distributes weight for support after fall
  • FULLY ADJUSTABLE DESIGN: Features DuraFlex Python webbing in lower torso for greater flexibility, mobility and less fatigue; quick-connect webbing strap buckles at legs and chest for easy on/off
  • CUSHIONED TUBULAR WEBBING: Features friction buckle & contoured-edge shoulder straps to minimize neck/shoulder discomfort when wearing a tool belt; high-density, abrasion-resistant and water-repellent
  • WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Safety Harness Webbing is heavy duty and tangle free to keep you comfortable and safe. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 30KN. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.
  • HARDWARE COMPONENTS ANSI/ASSE Z359.12-2009 Certified: WELKFORDER Safety Harness WFH001WG has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-rings for better work position only. Waist Tounge Buckle and Leg Tounge Buckles with Min. Breaking strength 4000lbs/18KN equipped with high quality grommets for quick fastening and easy adjustment provide both easy operation and safety.
  • SAFETY DESIGN PERFORMANCE:WELKFORDER Safety Harness WFH001WG are used for fall arrest, positioning, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Each of our products is Individually inspected.
  • ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" Shoulders Straps, Legs Straps and Chest Strap equipped with Alloy Steel Yellow Zinc Plated YOKE Tongue Buckles and Shoulder Pad, Hot-Press Waist Pad helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). General Waist Fitting Size 33'' to 45'' great for construction workers, carpenters, painters, roofers, window cleaners etc.
  • ANSI/ ASSE Z359.11-2014 Certified by UL and OSHA COMPLIANT: WELKFORDER Full Body Harness is ANSI/ ASSE Z359.11-2014 Certified by UL and in compliance with the requirements of OSHA 1926.502(d) (16) that based on basic fall safety principles have been incorporated into these standards, including hazard survey, hazard elimination and control. The primary intent is to ensure a proactive approach to fall protection.

More Info

Guardian Fall Protection 10900 11-Foot 1-Inch Nylon Webbing with Carabineer

Search only Guardian Fall Protection brand name
Guardian Fall Protection 10900 11-Foot 1-Inch Nylon Webbing with Carabineer

Current price: 100 USD

Saving: $89.00 (47%)


Check price and availability


Height: 3 Inches

Length: 9 Inches

Width: 9 Inches

  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Nonwoven Bag.
  • OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
  • ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
  • SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing tongue buckle straps of our SUPRECELL 3D Universal Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
  • REDUCE THE FEAR FACTOR: One (1) back dorsal ring and two (2) side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring is primarily used for fall arrest & can be used for travel restraint or rescue. Back support and shoulder paddings have been added to the design in order to prevent injury and provide comfort if a fall were to occur.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SUPERCELL | 3D Full Body Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, make sure all pass-through connectors on all 5 adjustment points are connected and aligned, the leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • FALL INDICATOR/WARNING FLAG: Deploys after fall to indicate the safety harness should be removed from service; solid color leg straps for easy donning; rated to 400-lbs. (181.4 kg)
  • SELF-CONTAINED LABEL PACK: encapsulates labels to minimize damage and loss; integrated, pull-free lanyard rings minimizes hazard of lanyard hanging freely; tool belt loops for easy attachment
  • SLIDING BACK D-RING: Made of forged steel for strength; soft, flexible Santoprene D-ring back pad enhances comfort; side-positioning D-rings; sub-pelvic strap distributes weight for support after fall
  • FULLY ADJUSTABLE DESIGN: Features DuraFlex Python webbing in lower torso for greater flexibility, mobility and less fatigue; quick-connect webbing strap buckles at legs and chest for easy on/off
  • CUSHIONED TUBULAR WEBBING: Features friction buckle & contoured-edge shoulder straps to minimize neck/shoulder discomfort when wearing a tool belt; high-density, abrasion-resistant and water-repellent
  • WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Safety Harness Webbing is heavy duty and tangle free to keep you comfortable and safe. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 30KN. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.
  • HARDWARE COMPONENTS ANSI/ASSE Z359.12-2009 Certified: WELKFORDER Safety Harness WFH001WG has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-rings for better work position only. Waist Tounge Buckle and Leg Tounge Buckles with Min. Breaking strength 4000lbs/18KN equipped with high quality grommets for quick fastening and easy adjustment provide both easy operation and safety.
  • SAFETY DESIGN PERFORMANCE:WELKFORDER Safety Harness WFH001WG are used for fall arrest, positioning, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Each of our products is Individually inspected.
  • ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" Shoulders Straps, Legs Straps and Chest Strap equipped with Alloy Steel Yellow Zinc Plated YOKE Tongue Buckles and Shoulder Pad, Hot-Press Waist Pad helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). General Waist Fitting Size 33'' to 45'' great for construction workers, carpenters, painters, roofers, window cleaners etc.
  • ANSI/ ASSE Z359.11-2014 Certified by UL and OSHA COMPLIANT: WELKFORDER Full Body Harness is ANSI/ ASSE Z359.11-2014 Certified by UL and in compliance with the requirements of OSHA 1926.502(d) (16) that based on basic fall safety principles have been incorporated into these standards, including hazard survey, hazard elimination and control. The primary intent is to ensure a proactive approach to fall protection.
  • 11 feet of 1-Inch nylon web
  • Meets or exceeds all applicable industry standards including OSHA and ANSI
  • No recertification required, considered a disposable unit
  • Dependable performance. Worker Capacity Range: 130-310 pounds

More Info

Full Body Safety Harness Tool Fall Protection with 5D-Rings and Waist Belt,Universal Personal Protective Equipment (A)

Search only GLOROUSCHU brand name
Full Body Safety Harness Tool Fall Protection with 5D-Rings and Waist Belt,Universal Personal Protective Equipment (A)

Current price: 42.8 USD

Saving: $56.00 (57%)


Check price and availability


  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Nonwoven Bag.
  • OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
  • ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
  • SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing tongue buckle straps of our SUPRECELL 3D Universal Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
  • REDUCE THE FEAR FACTOR: One (1) back dorsal ring and two (2) side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring is primarily used for fall arrest & can be used for travel restraint or rescue. Back support and shoulder paddings have been added to the design in order to prevent injury and provide comfort if a fall were to occur.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SUPERCELL | 3D Full Body Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, make sure all pass-through connectors on all 5 adjustment points are connected and aligned, the leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • FALL INDICATOR/WARNING FLAG: Deploys after fall to indicate the safety harness should be removed from service; solid color leg straps for easy donning; rated to 400-lbs. (181.4 kg)
  • SELF-CONTAINED LABEL PACK: encapsulates labels to minimize damage and loss; integrated, pull-free lanyard rings minimizes hazard of lanyard hanging freely; tool belt loops for easy attachment
  • SLIDING BACK D-RING: Made of forged steel for strength; soft, flexible Santoprene D-ring back pad enhances comfort; side-positioning D-rings; sub-pelvic strap distributes weight for support after fall
  • FULLY ADJUSTABLE DESIGN: Features DuraFlex Python webbing in lower torso for greater flexibility, mobility and less fatigue; quick-connect webbing strap buckles at legs and chest for easy on/off
  • CUSHIONED TUBULAR WEBBING: Features friction buckle & contoured-edge shoulder straps to minimize neck/shoulder discomfort when wearing a tool belt; high-density, abrasion-resistant and water-repellent
  • WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Safety Harness Webbing is heavy duty and tangle free to keep you comfortable and safe. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 30KN. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.
  • HARDWARE COMPONENTS ANSI/ASSE Z359.12-2009 Certified: WELKFORDER Safety Harness WFH001WG has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-rings for better work position only. Waist Tounge Buckle and Leg Tounge Buckles with Min. Breaking strength 4000lbs/18KN equipped with high quality grommets for quick fastening and easy adjustment provide both easy operation and safety.
  • SAFETY DESIGN PERFORMANCE:WELKFORDER Safety Harness WFH001WG are used for fall arrest, positioning, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Each of our products is Individually inspected.
  • ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" Shoulders Straps, Legs Straps and Chest Strap equipped with Alloy Steel Yellow Zinc Plated YOKE Tongue Buckles and Shoulder Pad, Hot-Press Waist Pad helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). General Waist Fitting Size 33'' to 45'' great for construction workers, carpenters, painters, roofers, window cleaners etc.
  • ANSI/ ASSE Z359.11-2014 Certified by UL and OSHA COMPLIANT: WELKFORDER Full Body Harness is ANSI/ ASSE Z359.11-2014 Certified by UL and in compliance with the requirements of OSHA 1926.502(d) (16) that based on basic fall safety principles have been incorporated into these standards, including hazard survey, hazard elimination and control. The primary intent is to ensure a proactive approach to fall protection.
  • 11 feet of 1-Inch nylon web
  • Meets or exceeds all applicable industry standards including OSHA and ANSI
  • No recertification required, considered a disposable unit
  • Dependable performance. Worker Capacity Range: 130-310 pounds
  • █ WARRANTY: 45 Days Money-Back & 2 Years Warranty, When You Are Not Satisfied with Our Product, Please Don't Hesitate to Contact Us. BUY WITH CONFIDENCE
  • █ Emportant Equipment Choice:Great for use in Construction, Demolition, Climbing, Welding, Roofing, Camping, Emergency, First responder, Landscaping, Paving, Police, Railroad, Sanitation, Security, Surveyor.
  • █ Great Size: Our 5-point full body harness a good general purpose safety harness for men and women. Waist size: 80-140cm(31.49inch-55.12inch) Leg size: 60-75cm(23.62inch-29.53inch).
  • █ Lightweight and Comfortable: Our roofers safety harness fits a weight range of 130-310lbs. It was felt light and comfortable without being restrictive when you keep focusing on your working safety at height. You can wear it all day long.
  • █ SAFETY DESIGN PERFORMANCE:When supported by the dorsal attachment during a fall, the design of GLOROUSCHU Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. Energy absorption system with 30mm Polymide webbing and PVC container case reduces the force of impact during fall. Each of our products is Individually inspected.

More Info

KwikSafety (Charlotte, NC) TORNADO COMBO | 1 D-Ring Full Body Safety Harness, 6’ Lanyard, Tool Lanyard, ANSI OSHA PPE Fall Protection Arrest Restraint Equipment Universal Construction Roofing Bucket

Search only KwikSafety brand name
KwikSafety (Charlotte, NC) TORNADO COMBO | 1 D-Ring Full Body Safety Harness, 6’ Lanyard, Tool Lanyard, ANSI OSHA PPE Fall Protection Arrest Restraint Equipment Universal Construction Roofing Bucket

Current price: 57.49 USD


Check price and availability


  • Tongue buckle leg straps and side D-rings
  • Hammer loops
  • Stretchability in the shoulder straps
  • Six points of adjustment
  • Quick adjust torso buckles
  • OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SCORPION System is ideal for construction, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SCORPION full body harness and lanyard system supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, see that all buckles are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014 -- All of KwikSafety’s full-body harnesses have undergone the “Qualification and Verification Testing of Fall Protection Products.” The SCORPION System exceeds the already-rigorous ANSI testing standards and is heavy-duty, high-performance fall protection you can trust to have your back. View the Compliance Label/ Safety Label for more information.
  • GET HOOKED: The internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards.
  • FULL ON FALL PROTECTION: You’re ready to work hard up high right off the bat with KwikSafety’s SCORPION Fall Protection System. The integrated single-leg lanyard and snap hook attached to the safety harness give you a complete safety package that’s ready and proven to perform in the worst-case scenario.
  • WHY – “STRAIGHT FROM THE SAFETY HORSE’S MOUTH” | KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, si habla Espanol (arnes de seguridad, arnés de protección contra caídas). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
  • WHERE – “At the Right Place at the Right Time” | Working at heights 6 ft or more? Equip yourself with the proper fall arrest system. The THUNDER safety harness is great for use at at Ports, Airports, Highways, Military Installations and Other Government Facilities. Great fall protection gear for jobs in Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Warehouses, Towers, Tree Climbing, Search and Rescue.
  • WHEN – “To Make a Long Safety Story Short” | This “One Size Fits Most” harness supports users 130 to 310 pounds (59 to 140 kilograms), 4’10” to 6’6” (147 to 198 centimeters) because of the multiple adjustment points. The pass through connectors are made of anodized yellow zinc to help preserve the longevity and durability of the harness by preventing rusting. Impact indicator tags located on the back straps release in the event of sudden impact from a fall.
  • WHAT – “All the Safety Bells and Whistles” | Our THUNDER safety harness is fully equipped with one (1) Dorsal Ring on the back and can be suitable for primary fall arrester attachment, travel restraint, and rescue. The load bearing straps are made from pure, non-recycled synthetic material that is water repellant, has superior stitching, and resistant against ageing, heat, and abrasion. Ensure a safe and proper fit with three (3) pass-through buckles located on the hips and chest of the harness.
  • WHO – “We Don’t Cut Corners on Safety” | The KwikSafety THUNDER is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Be seen and be safe with the fluorescent yellow durable, synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the THUNDER fall protection harness has your back!
  • WELKFORDER Full Body Harness Kits are ANSI/ ASSE Z359.11-2014, ANSI Z359.13-2013 and OSHA 1926.502(d) (16) complaint. This harness Kit must be used by a Competent Person. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use.
  • WELKFORDER Full Body Harness Kit Permanent Webbing is made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 22KN/5000lbs. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported. All Kit straps are inspected for tears, cuts, fraying, abrasion, discoloration, or other signs of wear and damage.
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap Hook used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety.
  • WELKFORDER Full Body Harness Kit Permanent are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected.
  • WELKFORDER Full Body Harness Kit Permanent have the fully passed test report performed at laboratory in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction, Climbing, Roofing, Camping, Window cleaning, and Surveyor etc. Packed in Nonwoven Bag.
  • OSHA APPROVED: The Occupational Safety & Health Administration was created by Congress to assure men & women safe and healthful working conditions by setting standards and providing training, outreach, education and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
  • ANSI COMPLIANT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the ‘Qualification and Verification Testing of Fall Protection Products’. This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.
  • SAFETY DESIGN REQUIRMENTS: If a fall were to occur, we want to ensure your safety by designing a safe and secure full body harness. The load bearing tongue buckle straps of our SUPRECELL 3D Universal Harness is made out of pure non-recycled synthetic material, which has the strength, ageing, abrasion and heat resistance that is equivalent or superior to polyester, and is lock stitched and securely back stitched together.
  • REDUCE THE FEAR FACTOR: One (1) back dorsal ring and two (2) side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring is primarily used for fall arrest & can be used for travel restraint or rescue. Back support and shoulder paddings have been added to the design in order to prevent injury and provide comfort if a fall were to occur.
  • PROPER FIT, PROPER PERFORMANCE: Correct fit is essential for proper performance. Our KwikSafety SUPERCELL | 3D Full Body Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, make sure all pass-through connectors on all 5 adjustment points are connected and aligned, the leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • FALL INDICATOR/WARNING FLAG: Deploys after fall to indicate the safety harness should be removed from service; solid color leg straps for easy donning; rated to 400-lbs. (181.4 kg)
  • SELF-CONTAINED LABEL PACK: encapsulates labels to minimize damage and loss; integrated, pull-free lanyard rings minimizes hazard of lanyard hanging freely; tool belt loops for easy attachment
  • SLIDING BACK D-RING: Made of forged steel for strength; soft, flexible Santoprene D-ring back pad enhances comfort; side-positioning D-rings; sub-pelvic strap distributes weight for support after fall
  • FULLY ADJUSTABLE DESIGN: Features DuraFlex Python webbing in lower torso for greater flexibility, mobility and less fatigue; quick-connect webbing strap buckles at legs and chest for easy on/off
  • CUSHIONED TUBULAR WEBBING: Features friction buckle & contoured-edge shoulder straps to minimize neck/shoulder discomfort when wearing a tool belt; high-density, abrasion-resistant and water-repellent
  • WEBBING & STITCHING QUALITY ASSURED: WELKFORDER Safety Harness Webbing is heavy duty and tangle free to keep you comfortable and safe. All straps are made from pure, non-recycled synthetic material having the strength, aging, abrasion and heat resistance characteristics with high tensile strength more than 30KN. All structural stitching patterns are of high breaking strength 4000lbs/18KN to keep you safe, secure and supported.
  • HARDWARE COMPONENTS ANSI/ASSE Z359.12-2009 Certified: WELKFORDER Safety Harness WFH001WG has 3 D-Rings all of Min. Breaking strength 5000lbs/22KN, one dorsal D-ring to match any foreseeable fall arrest working condition, two Waist D-rings for better work position only. Waist Tounge Buckle and Leg Tounge Buckles with Min. Breaking strength 4000lbs/18KN equipped with high quality grommets for quick fastening and easy adjustment provide both easy operation and safety.
  • SAFETY DESIGN PERFORMANCE:WELKFORDER Safety Harness WFH001WG are used for fall arrest, positioning, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30° to vertical. Each of our products is Individually inspected.
  • ERGONOMIC DESIGN FOR PROPER FIT: The combination of "No-loose-ends" Shoulders Straps, Legs Straps and Chest Strap equipped with Alloy Steel Yellow Zinc Plated YOKE Tongue Buckles and Shoulder Pad, Hot-Press Waist Pad helps reduce both the carried weight and required energy for all-day job performance for users within the capacity range of 130 to 310 pounds (59 to 140 kg). General Waist Fitting Size 33'' to 45'' great for construction workers, carpenters, painters, roofers, window cleaners etc.
  • ANSI/ ASSE Z359.11-2014 Certified by UL and OSHA COMPLIANT: WELKFORDER Full Body Harness is ANSI/ ASSE Z359.11-2014 Certified by UL and in compliance with the requirements of OSHA 1926.502(d) (16) that based on basic fall safety principles have been incorporated into these standards, including hazard survey, hazard elimination and control. The primary intent is to ensure a proactive approach to fall protection.
  • 11 feet of 1-Inch nylon web
  • Meets or exceeds all applicable industry standards including OSHA and ANSI
  • No recertification required, considered a disposable unit
  • Dependable performance. Worker Capacity Range: 130-310 pounds
  • █ WARRANTY: 45 Days Money-Back & 2 Years Warranty, When You Are Not Satisfied with Our Product, Please Don't Hesitate to Contact Us. BUY WITH CONFIDENCE
  • █ Emportant Equipment Choice:Great for use in Construction, Demolition, Climbing, Welding, Roofing, Camping, Emergency, First responder, Landscaping, Paving, Police, Railroad, Sanitation, Security, Surveyor.
  • █ Great Size: Our 5-point full body harness a good general purpose safety harness for men and women. Waist size: 80-140cm(31.49inch-55.12inch) Leg size: 60-75cm(23.62inch-29.53inch).
  • █ Lightweight and Comfortable: Our roofers safety harness fits a weight range of 130-310lbs. It was felt light and comfortable without being restrictive when you keep focusing on your working safety at height. You can wear it all day long.
  • █ SAFETY DESIGN PERFORMANCE:When supported by the dorsal attachment during a fall, the design of GLOROUSCHU Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. Energy absorption system with 30mm Polymide webbing and PVC container case reduces the force of impact during fall. Each of our products is Individually inspected.
  • TOOL LANYARD | The TENTACLE tool lanyard is designed for light duty uses, namely hand tools and smaller power tools. The lanyard has a durable bungee strap with a cord stopper with a durable rubber base to secure tools. The anodized aluminum carabiner (does not rust!) is an easy quick snap clip. The Tentacle is third party tested to a max capacity of 20 lbs, resting length is 3ft and activated length is about 5 ft.
  • SAFETY LANYARD - The internal shock-absorbing lanyard makes the RATTLER a more lightweight fall protection device. The dual-action, double-locking snap hooks prevent accidental rollout while remaining easy to latch on to your anchor point. The RATTLER has a 310 lb max capacity and the tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds.
  • SAFETY HARNESS - The KwikSafety TORNADO Full Body 1D Ring Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.
  • ANSI COMPLIANT - All of the items in the TORNADO COMBO are ANSI/ASSE and OSHA compliant, A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.
  • FALL PROTECTION COMBO - The KwikSafety TORNADO Fall Protection Kit is the ultimate bang for your buck, high value PPE products all bundled into one! Each Kit comes with a: 1D TORNADO Safety Harness, 6’ RATTLER Safety Lanyard, and a 10 lb Tool Lanyard. Truly the perfect Construction / Roofing / Roofer tool kit for a great value.

More Info

1    2    3    4    5    6    7    8    9    10