Best Seat Brackets. Reviews December, 2020

Invictus Side Mount Bucket Race Seat Brackets (1 Pack, Black)

Search only Invictus brand name
Invictus Side Mount Bucket Race Seat Brackets (1 Pack, Black)

Current price: 33.8 USD


Check price and availability


  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket

More Info

Univeral Bucket Seat Frame Mount Bracket

Search only Speedway Motors brand name
Univeral Bucket Seat Frame Mount Bracket

Current price: 36.17 USD


Check price and availability


Height: 6 Inches

Length: 19 Inches

Width: 15 Inches

Weight: 13 Pounds

  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car

More Info

Universal seat relocation brackets

Search only YearOne Wheels brand name
Universal seat relocation brackets

Current price: 29.93 USD


Check price and availability


  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car

More Info

Driver Seat Bracket for MOMO / NRG / Sparco / Recaro / Bride / OMP - Nissan 350Z (2003+) LOW - Part #SB015DR

Search only Planted brand name
Driver Seat Bracket for MOMO / NRG / Sparco / Recaro / Bride / OMP - Nissan 350Z (2003+) LOW - Part #SB015DR

Current price: 140 USD


Check price and availability


Height: 4 Inches

Length: 21 Inches

Width: 18 Inches

Weight: 7.9 Pounds

  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car
  • Made in USA
  • More versatile with predrilled slots for sliders
  • Extra material for direct mounting when the driver wishes to eliminate sliders altogether
  • Will not bend or warp with heat whereas other brackets can be bent by hand
  • Made from 3/16 inch steel making the welds stronger and more durable

More Info

Replacement for Chevy Corvette C5 Pair of Tensile Steel Low Mount Racing Seat Bracket

Search only Auto Dynasty brand name
Replacement for Chevy Corvette C5 Pair of Tensile Steel Low Mount Racing Seat Bracket

Current price: 76.88 USD


Check price and availability


  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car
  • Made in USA
  • More versatile with predrilled slots for sliders
  • Extra material for direct mounting when the driver wishes to eliminate sliders altogether
  • Will not bend or warp with heat whereas other brackets can be bent by hand
  • Made from 3/16 inch steel making the welds stronger and more durable
  • Fits 97-04 Chevrolet Corvette (No Instruction Included)
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • No Slider Required / Blanks and is Available to be Drilled to Fit / Modification or Reuse of OE Hardware might be Required
  • Low Mount Design
  • Made of High Quality of Tensile Steel

More Info

2PCS Universal PVC Leather Racing Seats, Reclinable Bucket Seat Come with Two Adjustable Slider, Mounting Brackets are NOT Include (Black & White Stitching)

Search only N / A brand name
2PCS Universal PVC Leather Racing Seats, Reclinable Bucket Seat Come with Two Adjustable Slider, Mounting Brackets are NOT Include (Black & White Stitching)

Current price: 323.99 USD


Check price and availability


Height: 21.6 Inches

Length: 36.6 Inches

Width: 21.6 Inches

  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car
  • Made in USA
  • More versatile with predrilled slots for sliders
  • Extra material for direct mounting when the driver wishes to eliminate sliders altogether
  • Will not bend or warp with heat whereas other brackets can be bent by hand
  • Made from 3/16 inch steel making the welds stronger and more durable
  • Fits 97-04 Chevrolet Corvette (No Instruction Included)
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • No Slider Required / Blanks and is Available to be Drilled to Fit / Modification or Reuse of OE Hardware might be Required
  • Low Mount Design
  • Made of High Quality of Tensile Steel
  • 【Worth To Own]】No instructions but it’s easy to assemble, and professional installation is highly recommended. The seat will need a seat bracket and sliders to install, this package will come with 2 sliders but DOES NOT include mounting brackets.
  • 【Come With 2 Sliders】 Reclining design with sliders design, comes with dual lock sliders. Support 180 degree backrest Rotation, these seats can fold forward and full adjustable backward between 90-155 degree.
  • 【Overall Dimensions】Each racing seat overall size is 36.6" x 21.6" x 21.6", please make sure your car has enough space. Our racing seats are universal seats and fit in any vehicles as long as the interior has enough space for the seats and has the correct seat mounting bracket, this package DOES NOT include mounting brackets.
  • 【Selected Material】Made of 3D full leather wrapped with breathable leather cushion and heavy metal material, covered with high quality PVC + Carbon leather back, durable, scratch-resistant and wear-resistant.
  • 【Unique Design】Made from a durable fabric, and this item available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. More comfortable and supportive than the stock leather seats.

More Info

Planted SB208DR Toyota Tacoma (1995.5-2004) - Driver Seat Bracket

Search only Planted brand name
Planted SB208DR Toyota Tacoma (1995.5-2004) - Driver Seat Bracket

Current price: 140 USD


Check price and availability


Warranty: Products and/or components manufactured and/or distributed by PLANTED TECHNOLOGY are for use on vehicles designed and built by persons not associated or controlled by PLANTED TECHNOLOGY.

  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car
  • Made in USA
  • More versatile with predrilled slots for sliders
  • Extra material for direct mounting when the driver wishes to eliminate sliders altogether
  • Will not bend or warp with heat whereas other brackets can be bent by hand
  • Made from 3/16 inch steel making the welds stronger and more durable
  • Fits 97-04 Chevrolet Corvette (No Instruction Included)
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • No Slider Required / Blanks and is Available to be Drilled to Fit / Modification or Reuse of OE Hardware might be Required
  • Low Mount Design
  • Made of High Quality of Tensile Steel
  • 【Worth To Own]】No instructions but it’s easy to assemble, and professional installation is highly recommended. The seat will need a seat bracket and sliders to install, this package will come with 2 sliders but DOES NOT include mounting brackets.
  • 【Come With 2 Sliders】 Reclining design with sliders design, comes with dual lock sliders. Support 180 degree backrest Rotation, these seats can fold forward and full adjustable backward between 90-155 degree.
  • 【Overall Dimensions】Each racing seat overall size is 36.6" x 21.6" x 21.6", please make sure your car has enough space. Our racing seats are universal seats and fit in any vehicles as long as the interior has enough space for the seats and has the correct seat mounting bracket, this package DOES NOT include mounting brackets.
  • 【Selected Material】Made of 3D full leather wrapped with breathable leather cushion and heavy metal material, covered with high quality PVC + Carbon leather back, durable, scratch-resistant and wear-resistant.
  • 【Unique Design】Made from a durable fabric, and this item available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. More comfortable and supportive than the stock leather seats.
  • Planted brackets are more versatile with predrilled slots for sliders from most major aftermarket seat manufacturers like Braum, Bride, Cipher Auto, Cobra, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status, Takata, etc.
  • Planted brackets will not bend or warp with heat whereas other brackets can be bent by hand.
  • Planted brackets are strong. They are made from 3/16th inch steel making the welds stronger and more durable.
  • Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat.
  • The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories.

More Info

DNA Motoring SBKLM350Z Low Mount Tensile Steel Seat Bracket for Nissan Fairlady Z33

Search only DNA MOTORING brand name
DNA Motoring SBKLM350Z Low Mount Tensile Steel Seat Bracket for Nissan Fairlady Z33

Current price: 90.99 USD


Check price and availability


  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car
  • Made in USA
  • More versatile with predrilled slots for sliders
  • Extra material for direct mounting when the driver wishes to eliminate sliders altogether
  • Will not bend or warp with heat whereas other brackets can be bent by hand
  • Made from 3/16 inch steel making the welds stronger and more durable
  • Fits 97-04 Chevrolet Corvette (No Instruction Included)
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • No Slider Required / Blanks and is Available to be Drilled to Fit / Modification or Reuse of OE Hardware might be Required
  • Low Mount Design
  • Made of High Quality of Tensile Steel
  • 【Worth To Own]】No instructions but it’s easy to assemble, and professional installation is highly recommended. The seat will need a seat bracket and sliders to install, this package will come with 2 sliders but DOES NOT include mounting brackets.
  • 【Come With 2 Sliders】 Reclining design with sliders design, comes with dual lock sliders. Support 180 degree backrest Rotation, these seats can fold forward and full adjustable backward between 90-155 degree.
  • 【Overall Dimensions】Each racing seat overall size is 36.6" x 21.6" x 21.6", please make sure your car has enough space. Our racing seats are universal seats and fit in any vehicles as long as the interior has enough space for the seats and has the correct seat mounting bracket, this package DOES NOT include mounting brackets.
  • 【Selected Material】Made of 3D full leather wrapped with breathable leather cushion and heavy metal material, covered with high quality PVC + Carbon leather back, durable, scratch-resistant and wear-resistant.
  • 【Unique Design】Made from a durable fabric, and this item available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. More comfortable and supportive than the stock leather seats.
  • Planted brackets are more versatile with predrilled slots for sliders from most major aftermarket seat manufacturers like Braum, Bride, Cipher Auto, Cobra, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status, Takata, etc.
  • Planted brackets will not bend or warp with heat whereas other brackets can be bent by hand.
  • Planted brackets are strong. They are made from 3/16th inch steel making the welds stronger and more durable.
  • Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat.
  • The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories.
  • No Slider is Required
  • Pre-Drilled hole Blanks and Can be Drilled to Fit
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • Does not Need Cutting or Welding to fit to Vehicles
  • Direct Fit for Most Aftermarket Racing Seat Sliders

More Info

OMP (HC/733E Seat Mount Bracket

Search only OMP brand name
OMP (HC/733E Seat Mount Bracket

Current price: 69 USD


Check price and availability


Height: 1.968503935 Inches

Length: 7.87401574 Inches

Width: 7.87401574 Inches

Weight: 5.51155655 Pounds

  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car
  • Made in USA
  • More versatile with predrilled slots for sliders
  • Extra material for direct mounting when the driver wishes to eliminate sliders altogether
  • Will not bend or warp with heat whereas other brackets can be bent by hand
  • Made from 3/16 inch steel making the welds stronger and more durable
  • Fits 97-04 Chevrolet Corvette (No Instruction Included)
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • No Slider Required / Blanks and is Available to be Drilled to Fit / Modification or Reuse of OE Hardware might be Required
  • Low Mount Design
  • Made of High Quality of Tensile Steel
  • 【Worth To Own]】No instructions but it’s easy to assemble, and professional installation is highly recommended. The seat will need a seat bracket and sliders to install, this package will come with 2 sliders but DOES NOT include mounting brackets.
  • 【Come With 2 Sliders】 Reclining design with sliders design, comes with dual lock sliders. Support 180 degree backrest Rotation, these seats can fold forward and full adjustable backward between 90-155 degree.
  • 【Overall Dimensions】Each racing seat overall size is 36.6" x 21.6" x 21.6", please make sure your car has enough space. Our racing seats are universal seats and fit in any vehicles as long as the interior has enough space for the seats and has the correct seat mounting bracket, this package DOES NOT include mounting brackets.
  • 【Selected Material】Made of 3D full leather wrapped with breathable leather cushion and heavy metal material, covered with high quality PVC + Carbon leather back, durable, scratch-resistant and wear-resistant.
  • 【Unique Design】Made from a durable fabric, and this item available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. More comfortable and supportive than the stock leather seats.
  • Planted brackets are more versatile with predrilled slots for sliders from most major aftermarket seat manufacturers like Braum, Bride, Cipher Auto, Cobra, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status, Takata, etc.
  • Planted brackets will not bend or warp with heat whereas other brackets can be bent by hand.
  • Planted brackets are strong. They are made from 3/16th inch steel making the welds stronger and more durable.
  • Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat.
  • The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories.
  • No Slider is Required
  • Pre-Drilled hole Blanks and Can be Drilled to Fit
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • Does not Need Cutting or Welding to fit to Vehicles
  • Direct Fit for Most Aftermarket Racing Seat Sliders
  • Package Weight : 6.0 pounds
  • Package Dimensions : 17.0 L x 6.0 H x 17.0 W (inches)
  • Made in Italy

More Info

Replacement for 03-09 Nissan 350Z Z33 Pair of Tensile Steel Low Mount Racing Seat Bracket

Search only Auto Dynasty brand name
Replacement for 03-09 Nissan 350Z Z33 Pair of Tensile Steel Low Mount Racing Seat Bracket

Current price: 87.88 USD


Check price and availability


  • Precision stamp cut and black powder coated for durability.
  • These brackets are made from high strength steel.
  • Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats
  • This kit is for only 1 seat
  • Black Bucket Race Side Mount Bracket
  • Universal application may require modification
  • Can complete assembly with sliders/mounting plates, part #91070026
  • 19” width, 15.13” length, 5” height, 14.25” x 18” floor bolt hole pattern
  • Steel frame, black painted finish
  • Install bucket seats in almost any car / race car
  • Made in USA
  • More versatile with predrilled slots for sliders
  • Extra material for direct mounting when the driver wishes to eliminate sliders altogether
  • Will not bend or warp with heat whereas other brackets can be bent by hand
  • Made from 3/16 inch steel making the welds stronger and more durable
  • Fits 97-04 Chevrolet Corvette (No Instruction Included)
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • No Slider Required / Blanks and is Available to be Drilled to Fit / Modification or Reuse of OE Hardware might be Required
  • Low Mount Design
  • Made of High Quality of Tensile Steel
  • 【Worth To Own]】No instructions but it’s easy to assemble, and professional installation is highly recommended. The seat will need a seat bracket and sliders to install, this package will come with 2 sliders but DOES NOT include mounting brackets.
  • 【Come With 2 Sliders】 Reclining design with sliders design, comes with dual lock sliders. Support 180 degree backrest Rotation, these seats can fold forward and full adjustable backward between 90-155 degree.
  • 【Overall Dimensions】Each racing seat overall size is 36.6" x 21.6" x 21.6", please make sure your car has enough space. Our racing seats are universal seats and fit in any vehicles as long as the interior has enough space for the seats and has the correct seat mounting bracket, this package DOES NOT include mounting brackets.
  • 【Selected Material】Made of 3D full leather wrapped with breathable leather cushion and heavy metal material, covered with high quality PVC + Carbon leather back, durable, scratch-resistant and wear-resistant.
  • 【Unique Design】Made from a durable fabric, and this item available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. More comfortable and supportive than the stock leather seats.
  • Planted brackets are more versatile with predrilled slots for sliders from most major aftermarket seat manufacturers like Braum, Bride, Cipher Auto, Cobra, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status, Takata, etc.
  • Planted brackets will not bend or warp with heat whereas other brackets can be bent by hand.
  • Planted brackets are strong. They are made from 3/16th inch steel making the welds stronger and more durable.
  • Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat.
  • The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories.
  • No Slider is Required
  • Pre-Drilled hole Blanks and Can be Drilled to Fit
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • Does not Need Cutting or Welding to fit to Vehicles
  • Direct Fit for Most Aftermarket Racing Seat Sliders
  • Package Weight : 6.0 pounds
  • Package Dimensions : 17.0 L x 6.0 H x 17.0 W (inches)
  • Made in Italy
  • No Slider is Required
  • Pre-Drilled hole Blanks and Can be Drilled to Fit
  • Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt
  • Does not Need Cutting or Welding to fit to Vehicles
  • Direct Fit for Most Aftermarket Racing Seat Sliders

More Info

1    2    3    4    5    6    7    8    9    10