Best Short Length Drill Bits. Reviews September, 2020

Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” - 1” by 1/16th Increment

Search only EFFICERE brand name
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” - 1” by 1/16th Increment

Current price: 29.99 USD


Check price and availability


  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials

More Info

Drill America 1/4" Cobalt Heavy Duty Split Point Stub Drill Bit (Pack of 12), D/ASTCO Series

Search only Drill America brand name
Drill America 1/4

Current price: 33.7 USD


Check price and availability


Height: 2 Inches

Length: 6 Inches

Width: 4 Inches

  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

NEIKO 11402A Stubby Drill Bit Set for Metal, 5 Piece | 1/4 Inch Quick Change Hex Shank | M2 HSS Steel

Search only Neiko brand name
NEIKO 11402A Stubby Drill Bit Set for Metal, 5 Piece | 1/4 Inch Quick Change Hex Shank | M2 HSS Steel

Current price: 13.99 USD


Check price and availability


  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • [SIZES]: The 5pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4” and 5/16” drill bits.
  • [CONVENIENT]: Each Stubby Bit measures from 1. 9 to 2. 32 inches for working in hard-to-reach, tight spaces with Short and Right Angle Drills.
  • [VERSATILE]: 1/4” Hex Shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.
  • [PRECISE]: 135 degree standard tip design delivers accurate and powerful penetration against metals, plastics and other hard surfaces.
  • [DURABLE]: The Short Bits are constructed of heavy duty, premium Molybdenum M2 High Speed Steel with evenly distributed carbides for resistance against wear.

More Info

Chicago Latrobe 69885 159 Series High-Speed Steel Short Length Drill Bit Set In Metal Case, Black Oxide Finish, 135 Degree Split Point, Wire Size, 60-piece, #60 - #1

Search only Chicago Latrobe brand name
Chicago Latrobe 69885 159 Series High-Speed Steel Short Length Drill Bit Set In Metal Case, Black Oxide Finish, 135 Degree Split Point, Wire Size, 60-piece, #60 - #1

Current price: 99.22 USD


Check price and availability


Height: 3.49999999643 Inches

Length: 1.299999998674 Inches

Width: 5.599999994288 Inches

Weight: 1.1 Pounds

  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • [SIZES]: The 5pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4” and 5/16” drill bits.
  • [CONVENIENT]: Each Stubby Bit measures from 1. 9 to 2. 32 inches for working in hard-to-reach, tight spaces with Short and Right Angle Drills.
  • [VERSATILE]: 1/4” Hex Shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.
  • [PRECISE]: 135 degree standard tip design delivers accurate and powerful penetration against metals, plastics and other hard surfaces.
  • [DURABLE]: The Short Bits are constructed of heavy duty, premium Molybdenum M2 High Speed Steel with evenly distributed carbides for resistance against wear.
  • Made in the USA
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 60 short length drill bits includes one each of wire gauge sizes #60 through #1

More Info

Chicago Latrobe - 69900 157 Series High-Speed Steel Short Length Drill Bit Set with Metal Case 118 Degree Conventional Point, Inch, 29-piece, 1/16" - 1/2" in 1/64" increments

Search only Chicago Latrobe brand name
Chicago Latrobe - 69900 157 Series High-Speed Steel Short Length Drill Bit Set with Metal Case 118 Degree Conventional Point, Inch, 29-piece, 1/16

Current price: 95.78 USD

Saving: $9.72 (9%)


Check price and availability


Height: 4.199999995716 Inches

Length: 1.899999998062 Inches

Width: 7.299999992554 Inches

Weight: 2.5 Pounds

  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • [SIZES]: The 5pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4” and 5/16” drill bits.
  • [CONVENIENT]: Each Stubby Bit measures from 1. 9 to 2. 32 inches for working in hard-to-reach, tight spaces with Short and Right Angle Drills.
  • [VERSATILE]: 1/4” Hex Shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.
  • [PRECISE]: 135 degree standard tip design delivers accurate and powerful penetration against metals, plastics and other hard surfaces.
  • [DURABLE]: The Short Bits are constructed of heavy duty, premium Molybdenum M2 High Speed Steel with evenly distributed carbides for resistance against wear.
  • Made in the USA
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 60 short length drill bits includes one each of wire gauge sizes #60 through #1
  • Made in the USA
  • Short length drill bits have the strength and rigidity required for heavy-feed rate applications
  • 118-degree conventional point for a range of drilling applications
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 29 short length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments

More Info

5Pc. Metal Stubby Bit Set

Search only Milescraft brand name
5Pc. Metal Stubby Bit Set

Current price: 12.98 USD

Saving: $4.01 (24%)


Check price and availability


Height: 0.75 Inches

Length: 4.75 Inches

Width: 3.88 Inches

Weight: 0.1 Pounds

Warranty: 90 day limited warranty against manufacturing defects.

  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • [SIZES]: The 5pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4” and 5/16” drill bits.
  • [CONVENIENT]: Each Stubby Bit measures from 1. 9 to 2. 32 inches for working in hard-to-reach, tight spaces with Short and Right Angle Drills.
  • [VERSATILE]: 1/4” Hex Shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.
  • [PRECISE]: 135 degree standard tip design delivers accurate and powerful penetration against metals, plastics and other hard surfaces.
  • [DURABLE]: The Short Bits are constructed of heavy duty, premium Molybdenum M2 High Speed Steel with evenly distributed carbides for resistance against wear.
  • Made in the USA
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 60 short length drill bits includes one each of wire gauge sizes #60 through #1
  • Made in the USA
  • Short length drill bits have the strength and rigidity required for heavy-feed rate applications
  • 118-degree conventional point for a range of drilling applications
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 29 short length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments
  • 135 Degree standard tip for drilling into metal, plastic, or other materials
  • 5 piece set of common size drill bits
  • 1/4-inch hex shank works with standard and quick change chucks
  • One piece precision ground from M2 high speed steel for long lasting durability
  • 1. 9 to 2. 32-Inch bits allow access to tight spaces

More Info

Chicago Latrobe 159 High-Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, 135 Degree Split Point, 1/8" Size (Pack of 12)

Search only Chicago Latrobe brand name
Chicago Latrobe 159 High-Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, 135 Degree Split Point, 1/8

Current price: 21.05 USD


Check price and availability


Height: 2.299999997654 Inches

Length: 0.149999999847 Inches

Width: 3.599999996328 Inches

Weight: 0.05 Pounds

  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • [SIZES]: The 5pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4” and 5/16” drill bits.
  • [CONVENIENT]: Each Stubby Bit measures from 1. 9 to 2. 32 inches for working in hard-to-reach, tight spaces with Short and Right Angle Drills.
  • [VERSATILE]: 1/4” Hex Shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.
  • [PRECISE]: 135 degree standard tip design delivers accurate and powerful penetration against metals, plastics and other hard surfaces.
  • [DURABLE]: The Short Bits are constructed of heavy duty, premium Molybdenum M2 High Speed Steel with evenly distributed carbides for resistance against wear.
  • Made in the USA
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 60 short length drill bits includes one each of wire gauge sizes #60 through #1
  • Made in the USA
  • Short length drill bits have the strength and rigidity required for heavy-feed rate applications
  • 118-degree conventional point for a range of drilling applications
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 29 short length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments
  • 135 Degree standard tip for drilling into metal, plastic, or other materials
  • 5 piece set of common size drill bits
  • 1/4-inch hex shank works with standard and quick change chucks
  • One piece precision ground from M2 high speed steel for long lasting durability
  • 1. 9 to 2. 32-Inch bits allow access to tight spaces
  • Made in the USA
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Shorter flute and overall length provide superior rigidity to minimize deflection when using heavy feed rates
  • 135 degree P3 split point is self-centering for reduced thrust and easier penetration
  • Manufactured from premium high-speed steel
  • Manufactured to NAS 907 Type C geometry aerospace specifications

More Info

COMOWARE Stubby Drill Bit Set for Metal, 5pcs HSS M2 Short Length Drill Bit with 1/4-Inch Quick Change Hex Shank

Search only COMOWARE brand name
COMOWARE Stubby Drill Bit Set for Metal, 5pcs HSS M2 Short Length Drill Bit with 1/4-Inch Quick Change Hex Shank

Current price: 13.99 USD


Check price and availability


  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • [SIZES]: The 5pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4” and 5/16” drill bits.
  • [CONVENIENT]: Each Stubby Bit measures from 1. 9 to 2. 32 inches for working in hard-to-reach, tight spaces with Short and Right Angle Drills.
  • [VERSATILE]: 1/4” Hex Shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.
  • [PRECISE]: 135 degree standard tip design delivers accurate and powerful penetration against metals, plastics and other hard surfaces.
  • [DURABLE]: The Short Bits are constructed of heavy duty, premium Molybdenum M2 High Speed Steel with evenly distributed carbides for resistance against wear.
  • Made in the USA
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 60 short length drill bits includes one each of wire gauge sizes #60 through #1
  • Made in the USA
  • Short length drill bits have the strength and rigidity required for heavy-feed rate applications
  • 118-degree conventional point for a range of drilling applications
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 29 short length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments
  • 135 Degree standard tip for drilling into metal, plastic, or other materials
  • 5 piece set of common size drill bits
  • 1/4-inch hex shank works with standard and quick change chucks
  • One piece precision ground from M2 high speed steel for long lasting durability
  • 1. 9 to 2. 32-Inch bits allow access to tight spaces
  • Made in the USA
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Shorter flute and overall length provide superior rigidity to minimize deflection when using heavy feed rates
  • 135 degree P3 split point is self-centering for reduced thrust and easier penetration
  • Manufactured from premium high-speed steel
  • Manufactured to NAS 907 Type C geometry aerospace specifications
  • Application Widely - The drill bit set includes 5pcs of drill bits in 5 different sizes to satisfy your demands: 3/32”, 1/8”, 3/16”, 1/4”, 5/16”. The drill bit set is more suitable for processing plastics and woods, it can be also used for hard metal.
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces.
  • Quick Change - 1/4” hex shank fits into all power tools more easily and securely, it is suitable for quick change drill chunks for fast and easy swapping.
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces.
  • Premium High Quality - Short length drill bit is made from superior HSS M2 material with evenly distributed carbides for long lasting strength and durability. The drill bit is always sharp at each use.

More Info

29PC Stubby Industrial Black & Gold Drill Bit Set 135 Degree Split Point

Search only Vector Tools brand name
29PC Stubby Industrial Black & Gold Drill Bit Set 135 Degree Split Point

Current price: 54.95 USD


Check price and availability


Height: 5 Inches

Length: 8 Inches

Width: 3 Inches

Weight: 3 Pounds

  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • [SIZES]: The 5pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4” and 5/16” drill bits.
  • [CONVENIENT]: Each Stubby Bit measures from 1. 9 to 2. 32 inches for working in hard-to-reach, tight spaces with Short and Right Angle Drills.
  • [VERSATILE]: 1/4” Hex Shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.
  • [PRECISE]: 135 degree standard tip design delivers accurate and powerful penetration against metals, plastics and other hard surfaces.
  • [DURABLE]: The Short Bits are constructed of heavy duty, premium Molybdenum M2 High Speed Steel with evenly distributed carbides for resistance against wear.
  • Made in the USA
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 60 short length drill bits includes one each of wire gauge sizes #60 through #1
  • Made in the USA
  • Short length drill bits have the strength and rigidity required for heavy-feed rate applications
  • 118-degree conventional point for a range of drilling applications
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 29 short length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments
  • 135 Degree standard tip for drilling into metal, plastic, or other materials
  • 5 piece set of common size drill bits
  • 1/4-inch hex shank works with standard and quick change chucks
  • One piece precision ground from M2 high speed steel for long lasting durability
  • 1. 9 to 2. 32-Inch bits allow access to tight spaces
  • Made in the USA
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Shorter flute and overall length provide superior rigidity to minimize deflection when using heavy feed rates
  • 135 degree P3 split point is self-centering for reduced thrust and easier penetration
  • Manufactured from premium high-speed steel
  • Manufactured to NAS 907 Type C geometry aerospace specifications
  • Application Widely - The drill bit set includes 5pcs of drill bits in 5 different sizes to satisfy your demands: 3/32”, 1/8”, 3/16”, 1/4”, 5/16”. The drill bit set is more suitable for processing plastics and woods, it can be also used for hard metal.
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces.
  • Quick Change - 1/4” hex shank fits into all power tools more easily and securely, it is suitable for quick change drill chunks for fast and easy swapping.
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces.
  • Premium High Quality - Short length drill bit is made from superior HSS M2 material with evenly distributed carbides for long lasting strength and durability. The drill bit is always sharp at each use.
  • Neatly organized in a Metal Case, Drill Indexed
  • Black/gold colored finish
  • 135 degree split point, Fully ground, Self-centering, Stubby length
  • 1/16" to 1/2" in 1/64" increments

More Info

COMOWARE Step Drill Bit Set & Automatic Center Punch- Black and Gold, Double Cutting Blades, High Speed Steel, Short Length Drill Bits Set of 5 pcs, Total 50 Sizes with Aluminum Case

Search only COMOWARE brand name
COMOWARE Step Drill Bit Set & Automatic Center Punch- Black and Gold, Double Cutting Blades, High Speed Steel, Short Length Drill Bits Set of 5 pcs, Total 50 Sizes with Aluminum Case

Current price: 27.99 USD

Saving: $2.00 (7%)


Check price and availability


  • Set includes 8 pieces 6” long silver & deming drill bits in a heavy duty aluminum storage case for easy carrying and organization: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”
  • 1/2 Inch reduced shank with tri-flatted end locks onto 3-jaw power tools chuck more securely and eliminates slips
  • 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
  • Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
  • Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
  • Ideal for portable or machine drilling
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • [SIZES]: The 5pc drill bit set includes a Hex Shank Holder and the following bit sizes: 3/32”, 1/8”, 3/16”, 1/4” and 5/16” drill bits.
  • [CONVENIENT]: Each Stubby Bit measures from 1. 9 to 2. 32 inches for working in hard-to-reach, tight spaces with Short and Right Angle Drills.
  • [VERSATILE]: 1/4” Hex Shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.
  • [PRECISE]: 135 degree standard tip design delivers accurate and powerful penetration against metals, plastics and other hard surfaces.
  • [DURABLE]: The Short Bits are constructed of heavy duty, premium Molybdenum M2 High Speed Steel with evenly distributed carbides for resistance against wear.
  • Made in the USA
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 60 short length drill bits includes one each of wire gauge sizes #60 through #1
  • Made in the USA
  • Short length drill bits have the strength and rigidity required for heavy-feed rate applications
  • 118-degree conventional point for a range of drilling applications
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
  • High-speed steel (HSS) provides hardness for wear resistance
  • Set of 29 short length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments
  • 135 Degree standard tip for drilling into metal, plastic, or other materials
  • 5 piece set of common size drill bits
  • 1/4-inch hex shank works with standard and quick change chucks
  • One piece precision ground from M2 high speed steel for long lasting durability
  • 1. 9 to 2. 32-Inch bits allow access to tight spaces
  • Made in the USA
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
  • Shorter flute and overall length provide superior rigidity to minimize deflection when using heavy feed rates
  • 135 degree P3 split point is self-centering for reduced thrust and easier penetration
  • Manufactured from premium high-speed steel
  • Manufactured to NAS 907 Type C geometry aerospace specifications
  • Application Widely - The drill bit set includes 5pcs of drill bits in 5 different sizes to satisfy your demands: 3/32”, 1/8”, 3/16”, 1/4”, 5/16”. The drill bit set is more suitable for processing plastics and woods, it can be also used for hard metal.
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces.
  • Quick Change - 1/4” hex shank fits into all power tools more easily and securely, it is suitable for quick change drill chunks for fast and easy swapping.
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces.
  • Premium High Quality - Short length drill bit is made from superior HSS M2 material with evenly distributed carbides for long lasting strength and durability. The drill bit is always sharp at each use.
  • Neatly organized in a Metal Case, Drill Indexed
  • Black/gold colored finish
  • 135 degree split point, Fully ground, Self-centering, Stubby length
  • 1/16" to 1/2" in 1/64" increments
  • Set Includes - The drill bits set includes five common sizes for versatility, can fit the majority of brands currently on the market.
  • Easy Organizing - A drill bits holder with size index is included in the metal kit for easy storage and organizing without fear of it falling out.
  • Design - The split point tip is at 118 degrees to increase the wear resistance. The two flute design provides a smoother cutting, allows the material particles escape easily for a much more clean drilling operation.
  • Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal/wood/plastic countersunk. Suitable for Home DIY, and General Building/Engineering Use.
  • HSS - High Speed Steel Black and Gold, resists corrosion, ensures outstanding durability and sharpness, can reduces the friction, runs cooler.

More Info

1    2    3    4    5    6    7    8    9    10