Exclusive Single End Countersinks. Reviews January, 2021, page 2
KEO 55531 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 46.96 USD
Saving: $14.33 (23%)
Weight: 0.35 Pounds
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
KEO 53521 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 90 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 3/8" Body Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 27.3 USD
Height: 0.4 Inches
Length: 2.5 Inches
Width: 0.7 Inches
Weight: 0.15 Pounds
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
KEO 53532 Cobalt Steel Single-End Countersink, TiN Coated, 100 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 21.02 USD
Height: 0.5 Inches
Length: 2.5 Inches
Width: 0.6 Inches
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 100 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
KEO 53513 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 5/8" Body Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 23.99 USD
Height: 1 Inches
Length: 3 Inches
Width: 1 Inches
Weight: 0.000625 Pounds
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 100 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
KEO 53538 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 100 Degree Point Angle, 5/16" - 5/8" Head Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 82.04 USD
Height: 1.2 Inches
Length: 5.4 Inches
Width: 3.4 Inches
Weight: 1 Pounds
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 100 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Made in Great Britain
- Straight shank, CNC precision cam ground, M35 cobalt steel material, chatter-free cutting action
- 100 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
KEO 55032 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1-1/4" Body Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 68.78 USD
Saving: $12.99 (16%)
Weight: 0.4 Pounds
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 100 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Made in Great Britain
- Straight shank, CNC precision cam ground, M35 cobalt steel material, chatter-free cutting action
- 100 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
KEO 50059 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, Single Flute, 90 Degree Angle, 1/4" - 1" Body Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 120 USD
Weight: 0.2 Pounds
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 100 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Made in Great Britain
- Straight shank, CNC precision cam ground, M35 cobalt steel material, chatter-free cutting action
- 100 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- ISO 9001:2008 certified
- Each 5-piece set includes one piece each of 1/4, 3/8, 1/2, 3/4, 1" body diameter with a particular included point angle
- 90 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
KEO 51752 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 120 Degree Point Angle, Round Shank, 3/4" Shank Diameter, 1-3/4" Body Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 92.93 USD
Saving: $143.44 (61%)
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 100 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Made in Great Britain
- Straight shank, CNC precision cam ground, M35 cobalt steel material, chatter-free cutting action
- 100 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- ISO 9001:2008 certified
- Each 5-piece set includes one piece each of 1/4, 3/8, 1/2, 3/4, 1" body diameter with a particular included point angle
- 90 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 120 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
KEO 53108 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 82 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 37.99 USD
Saving: $16.86 (31%)
Weight: 0.000625 Pounds
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 100 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Made in Great Britain
- Straight shank, CNC precision cam ground, M35 cobalt steel material, chatter-free cutting action
- 100 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- ISO 9001:2008 certified
- Each 5-piece set includes one piece each of 1/4, 3/8, 1/2, 3/4, 1" body diameter with a particular included point angle
- 90 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 120 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
KEO 53528 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 90 Degree Angle, 5/16" - 5/8" Head Diameter
More from Industrial & ScientificSearch only KEO Cutters brand name
Current price: 75.16 USD
Saving: $20.77 (22%)
Height: 1.2 Inches
Length: 5.4 Inches
Width: 3.4 Inches
Weight: 0.08 Pounds
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 90 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 100 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Made in Great Britain
- Straight shank, CNC precision cam ground, M35 cobalt steel material, chatter-free cutting action
- 100 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- ISO 9001:2008 certified
- Each 5-piece set includes one piece each of 1/4, 3/8, 1/2, 3/4, 1" body diameter with a particular included point angle
- 90 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- 120 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- 82 degree angle
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Round shanks allow use with a wide variety of toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Made in Great Britain
- Straight shank, CNC precision cam ground, M35 cobalt steel material, chatter-free cutting action
- 90 degree angle
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
1 2 3 4 5 6 7 8 9 10