Affordable Single End Countersinks. Reviews January, 2021, page 6

KEO 53505 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 60 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 1" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 53505 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 60 Degree Point Angle, Round Shank, 3/8

Current price: 56.61 USD


Check price and availability


Height: 1.1 Inches

Length: 3.1 Inches

Width: 1.2 Inches

Weight: 0.05 Pounds

  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

KEO 55052 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1-1/4" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55052 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/2

Current price: 93.09 USD


Check price and availability


Weight: 0.42 Pounds

  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

KEO 53533 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 100 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 5/8" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 53533 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 100 Degree Point Angle, Round Shank, 3/8

Current price: 52.7 USD


Check price and availability


Weight: 0.1 Pounds

  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

KEO 51008 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 82 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 51008 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 3 Flutes, 82 Degree Point Angle, Round Shank, 1/2

Current price: 47.18 USD

Saving: $6.01 (11%)


Check price and availability


Height: 1.2 Inches

Length: 2.8 Inches

Width: 1.2 Inches

Weight: 0.25 Pounds

  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

KEO 55431 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 90 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55431 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 90 Degree Point Angle, Round Shank, 1/2

Current price: 74.54 USD


Check price and availability


Weight: 0.39 Pounds

  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

KEO 55724 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 90 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 1/2" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55724 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 90 Degree Point Angle, Round Shank, 1/4

Current price: 47.78 USD

Saving: $11.57 (19%)


Check price and availability


Weight: 0.06 Pounds

  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

KEO 41006 High-Speed Steel Machine Single-End Countersink, Uncoated (Bright) Finish, 4 Flutes, 60 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 41006 High-Speed Steel Machine Single-End Countersink, Uncoated (Bright) Finish, 4 Flutes, 60 Degree Point Angle, Round Shank, 1/2

Current price: 101.13 USD


Check price and availability


Weight: 0.4 Pounds

  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree point angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

KEO 55814 Solid Carbide Single-End Countersink, TiALN Coated, 6 Flutes, 100 Degree Point Angle, Round Shank, 3/16" Shank Diameter, 3/16" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55814 Solid Carbide Single-End Countersink, TiALN Coated, 6 Flutes, 100 Degree Point Angle, Round Shank, 3/16

Current price: 22.58 USD

Saving: $4.18 (16%)


Check price and availability


  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree point angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

KEO 53513 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 5/8" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 53513 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 3/8

Current price: 37.03 USD


Check price and availability


Height: 2.2 Inches

Length: 0.9 Inches

Width: 0.8 Inches

  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree point angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

KEO 55593 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 110 Degree Point Angle, Round Shank, 3/4" Shank Diameter, 1-1/2" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55593 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 110 Degree Point Angle, Round Shank, 3/4

Current price: 142.22 USD


Check price and availability


  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree point angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 100 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 110 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

1    2    3    4    5    6    7    8    9    10