Wonderful Single End Countersinks. Reviews January, 2021, page 7

KEO 55098 High-Speed Steel Single-End Countersink Set, Uncoated (Bright) Finish, 6 Flutes, 110 Degree Point Angle, 1/4" - 1" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55098 High-Speed Steel Single-End Countersink Set, Uncoated (Bright) Finish, 6 Flutes, 110 Degree Point Angle, 1/4

Current price: 146.55 USD


Check price and availability


Weight: 0.41 Pounds

  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance

More Info

CSLU 5Pcs 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4 3/8 1/2 5/8 3/4 inch

More from Industrial & Scientific
Search only CSLU brand name
CSLU 5Pcs 82 Degree 5 Flute 6mm Round Shank HSS Chamfer Chamfering End Mill Cutter Bit Countersink Set 1/4 3/8 1/2 5/8 3/4 inch

Current price: 19.99 USD


Check price and availability


Height: 1.181102361 Inches

Length: 4.724409444 Inches

Width: 3.149606296 Inches

Weight: 234 Grams

  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.

More Info

KEO 55431 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 90 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55431 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 90 Degree Point Angle, Round Shank, 1/2

Current price: 74.54 USD


Check price and availability


Weight: 0.39 Pounds

  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

KEO 55712 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 82 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 1/4" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55712 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 82 Degree Point Angle, Round Shank, 1/4

Current price: 21.34 USD


Check price and availability


Weight: 0.000625 Pounds

  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

KEO 55513 Cobalt Steel Single-End Countersink, TiN Coated, 6 Flutes, 60 Degree Point Angle, Round Shank, 3/4" Shank Diameter, 1-1/2" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55513 Cobalt Steel Single-End Countersink, TiN Coated, 6 Flutes, 60 Degree Point Angle, Round Shank, 3/4

Current price: 133.86 USD

Saving: $37.91 (22%)


Check price and availability


  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

KEO 55615 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 120 Degree Point Angle, Round Shank, 3/4" Shank Diameter, 2" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55615 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 120 Degree Point Angle, Round Shank, 3/4

Current price: 232 USD


Check price and availability


Weight: 1.51 Pounds

  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 120 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

KEO 53501 Cobalt Steel Single-End Countersink, TiN Coated, 60 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 3/8" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 53501 Cobalt Steel Single-End Countersink, TiN Coated, 60 Degree Point Angle, Round Shank, 1/4

Current price: 16 USD

Saving: $7.45 (32%)


Check price and availability


Height: 2.5 Inches

Length: 0.7 Inches

Width: 0.7 Inches

  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 120 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

KEO 55612 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 120 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1-1/4" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55612 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 120 Degree Point Angle, Round Shank, 1/2

Current price: 71 USD

Saving: $23.04 (25%)


Check price and availability


Weight: 0.44 Pounds

  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 120 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 120 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys

More Info

Morse Cutting Tools 25661 Single Flute Countersink, M42 8% Cobalt, Titanium Nitride Coated, 82 Degree Point, 1/2" Size

More from Industrial & Scientific
Search only Morse Cutting Tools brand name
Morse Cutting Tools 25661 Single Flute Countersink, M42 8% Cobalt, Titanium Nitride Coated, 82 Degree Point, 1/2

Current price: 26.8 USD


Check price and availability


  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 120 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 120 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • Package Weight : 0.009 kilograms
  • Single Flute - Tin Coated
  • M42 8% Cobalt
  • List No. 1754

More Info

KEO 55806 Solid Carbide Single-End Countersink, TiALN Coated, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 1/2" Body Diameter

More from Industrial & Scientific
Search only KEO Cutters brand name
KEO 55806 Solid Carbide Single-End Countersink, TiALN Coated, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/4

Current price: 61.43 USD

Saving: $19.64 (24%)


Check price and availability


Height: 2.8 Inches

Length: 0.7 Inches

Width: 0.7 Inches

  • HSS sets include one piece each of 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1" body diameter with a particular included point angle
  • 110 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Package Included: 1/4,3/8,1/2,5/8,3/4inch chamfering device.
  • During use, the five blade can better chip removal, the blade is not easily blunt.
  • High hardness.
  • For aluminum, iron, PV panels and other soft materials.
  • 5 blade chamfering device 82 degree.
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 82 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 120 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 60 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • 120 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
  • Package Weight : 0.009 kilograms
  • Single Flute - Tin Coated
  • M42 8% Cobalt
  • List No. 1754
  • 90 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Round shanks allow use with a wide variety of toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

More Info

1    2    3    4    5    6    7    8    9    10