Best Spindle HubSeals. Reviews December, 2020

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub

Search only SOUTHWEST WHEEL brand name
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4

Current price: 39.99 USD


Check price and availability


  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

More Info

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub

Search only SOUTHWEST WHEEL brand name
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5

Current price: 39.99 USD


Check price and availability


  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

More Info

Round Stock - Trailer Axle Spindle for 1-3/8 Inch to 1-1/16 Inch I.D Bearings

Search only Rigid Hitch brand name
Round Stock - Trailer Axle Spindle for 1-3/8 Inch to 1-1/16 Inch I.D Bearings

Current price: 26.63 USD


Check price and availability


  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Read product description below for more information
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Seal surface diameter - 1.72 inches
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface

More Info

Southwest Wheel R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub

Search only Southwest Wheel brand name
Southwest Wheel R50642X 42 Spindle & 8-6.5

Current price: 84.99 USD


Check price and availability


Weight: 7 Pounds

  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Read product description below for more information
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Seal surface diameter - 1.72 inches
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub.
  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.

More Info

ABN 4WD Spindle Nut Socket, 1/2in Drive – Spindle Socket Hub Socket, Hub Nut Socket – 6 Outer, 3/4 Ton to 1 Ton

Search only ABN brand name
ABN 4WD Spindle Nut Socket, 1/2in Drive – Spindle Socket Hub Socket, Hub Nut Socket – 6 Outer, 3/4 Ton to 1 Ton

Current price: 14.99 USD


Check price and availability


Height: 6.75196849705 Inches

Length: 4.75196849909 Inches

Width: 2.70078739882 Inches

Weight: 1.4991433816 Pounds

  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Read product description below for more information
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Seal surface diameter - 1.72 inches
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub.
  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 6 outer lug slots for 3/4 Ton to 1 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with 3/4 Ton and 1 Ton Ford Pickup and Bronco 1978 and newer; 3/4 Ton and 1 Ton GMC and Chevrolet Pickups 1973 and newer
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-5/8-inch (67mm) outer diameter (OD); Includes 6 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more

More Info

SOUTHWEST WHEEL 4-Hole, 4" Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) for 1" Spindle

Search only SOUTHWEST WHEEL brand name
SOUTHWEST WHEEL 4-Hole, 4

Current price: 31.99 USD


Check price and availability


Weight: 10 Pounds

  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Read product description below for more information
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Seal surface diameter - 1.72 inches
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub.
  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 6 outer lug slots for 3/4 Ton to 1 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with 3/4 Ton and 1 Ton Ford Pickup and Bronco 1978 and newer; 3/4 Ton and 1 Ton GMC and Chevrolet Pickups 1973 and newer
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-5/8-inch (67mm) outer diameter (OD); Includes 6 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
  • TruRyde Hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating.
  • Fits a BT8 Spindle (1" OD)
  • Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.
  • 4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings.

More Info

ABN 4WD Spindle Nut Socket, 1/2in Drive – Spindle Socket Hub Socket, Hub Nut Socket – 4 Outer, 1/2 Ton to 3/4 Ton

Search only ABN brand name
ABN 4WD Spindle Nut Socket, 1/2in Drive – Spindle Socket Hub Socket, Hub Nut Socket – 4 Outer, 1/2 Ton to 3/4 Ton

Current price: 13.29 USD


Check price and availability


Height: 6.75196849705 Inches

Length: 4.75196849909 Inches

Width: 2.49999999745 Inches

Weight: 0.68 Pounds

  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Read product description below for more information
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Seal surface diameter - 1.72 inches
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub.
  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 6 outer lug slots for 3/4 Ton to 1 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with 3/4 Ton and 1 Ton Ford Pickup and Bronco 1978 and newer; 3/4 Ton and 1 Ton GMC and Chevrolet Pickups 1973 and newer
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-5/8-inch (67mm) outer diameter (OD); Includes 6 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
  • TruRyde Hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating.
  • Fits a BT8 Spindle (1" OD)
  • Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.
  • 4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 4 outer lug slots for 1/2 Ton to 3/4 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with Chevrolet/GMC – 1/2 Ton Pickup, Blazer, and Jimmy; Ford – Bronco, Bronco II, Ranger, Explorer 1/2 Ton, and 3/4 Ton F-Series Pickup with spline-type hub; International – 1100 series; Dodge – 1/2 Ton Pickup and Ramcharger
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-3/8-inch (60mm) outer diameter (OD); Includes 4 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more

More Info

HUB SPINDLE

Search only Dana Spicer brand name
HUB SPINDLE

Current price: 257.16 USD


Check price and availability


Weight: 6 Pounds

  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Read product description below for more information
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Seal surface diameter - 1.72 inches
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub.
  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 6 outer lug slots for 3/4 Ton to 1 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with 3/4 Ton and 1 Ton Ford Pickup and Bronco 1978 and newer; 3/4 Ton and 1 Ton GMC and Chevrolet Pickups 1973 and newer
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-5/8-inch (67mm) outer diameter (OD); Includes 6 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
  • TruRyde Hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating.
  • Fits a BT8 Spindle (1" OD)
  • Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.
  • 4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 4 outer lug slots for 1/2 Ton to 3/4 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with Chevrolet/GMC – 1/2 Ton Pickup, Blazer, and Jimmy; Ford – Bronco, Bronco II, Ranger, Explorer 1/2 Ton, and 3/4 Ton F-Series Pickup with spline-type hub; International – 1100 series; Dodge – 1/2 Ton Pickup and Ramcharger
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-3/8-inch (60mm) outer diameter (OD); Includes 4 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more
  • Dana/Spicer

More Info

Southwest Wheel R40842 42 Spindle & 8-6.5" Bolt Circle Trailer Hub

Search only Southwest Wheel brand name
Southwest Wheel R40842 42 Spindle & 8-6.5

Current price: 84.95 USD


Check price and availability


Weight: 7 Pounds

  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Read product description below for more information
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Seal surface diameter - 1.72 inches
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub.
  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 6 outer lug slots for 3/4 Ton to 1 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with 3/4 Ton and 1 Ton Ford Pickup and Bronco 1978 and newer; 3/4 Ton and 1 Ton GMC and Chevrolet Pickups 1973 and newer
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-5/8-inch (67mm) outer diameter (OD); Includes 6 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
  • TruRyde Hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating.
  • Fits a BT8 Spindle (1" OD)
  • Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.
  • 4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 4 outer lug slots for 1/2 Ton to 3/4 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with Chevrolet/GMC – 1/2 Ton Pickup, Blazer, and Jimmy; Ford – Bronco, Bronco II, Ranger, Explorer 1/2 Ton, and 3/4 Ton F-Series Pickup with spline-type hub; International – 1100 series; Dodge – 1/2 Ton Pickup and Ramcharger
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-3/8-inch (60mm) outer diameter (OD); Includes 4 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more
  • Dana/Spicer
  • 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub
  • Round R40842 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.

More Info

Spindle Adapter, 8 in, 2 in Spindles,

Search only Lincoln Electric brand name
Spindle Adapter, 8 in, 2 in Spindles,

Current price: 38.95 USD


Check price and availability


Height: 4.7 Inches

Length: 4.4 Inches

Width: 4.4 Inches

Weight: 1 Pounds

  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 4-4" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
  • Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
  • 5-4.5" BT8 hub pre raced and studded.
  • Spindle includes spindle nut, spindle washer, and cotter pin.
  • 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
  • Read product description below for more information
  • Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
  • Seal surface diameter - 1.72 inches
  • 1¾" diameter mounting surface - Capacity 1,750 lbs - Thread 1"-14
  • 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
  • 42 Spindle, Spindle width =2 1/4" Spindle length=6" Overall length =11 1/16" Capacity (pair) 5,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub.
  • Round R50642X 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 6 outer lug slots for 3/4 Ton to 1 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with 3/4 Ton and 1 Ton Ford Pickup and Bronco 1978 and newer; 3/4 Ton and 1 Ton GMC and Chevrolet Pickups 1973 and newer
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-5/8-inch (67mm) outer diameter (OD); Includes 6 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more
  • TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.
  • TruRyde Hubs are pre-raced & all studs are 1/2"-20 with yellow finished zinc plating.
  • Fits a BT8 Spindle (1" OD)
  • Contains TruRyde inner bearing, outer bearing, seal, solid grease cap and lug nuts.
  • 4 studs 4" bolt circle using TruRyde L44643 inner and outer bearings.
  • PACKAGE CONTENTS: Package includes (1) 4WD spindle nut socket with 4 outer lug slots for 1/2 Ton to 3/4 Ton vehicles; Not for use with impact wrench
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) with a black oxide finish for maximum strength and longevity that resists rust and corrosion
  • FITS YOUR VEHICLE: Compatible with Chevrolet/GMC – 1/2 Ton Pickup, Blazer, and Jimmy; Ford – Bronco, Bronco II, Ranger, Explorer 1/2 Ton, and 3/4 Ton F-Series Pickup with spline-type hub; International – 1100 series; Dodge – 1/2 Ton Pickup and Ramcharger
  • PERFECT SIZE: 1/2-inch drive to be used with your existing hand tools; 2-3/8-inch (60mm) outer diameter (OD); Includes 4 outer lug slots (Dana 44); To ensure exact fitment, remove the axle and measure the diameter of the nut
  • GET THE JOB DONE: The ABN | 4WD Spindle Nut Socket allows for easy removal of spindle nuts on the inside of the hub to replace emergency brakes and more
  • Dana/Spicer
  • 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 42 Spindle
  • 8 studs 6.5" Bolt circle using 25580 inner and 14125A outer bearing hub
  • Round R40842 42 Spindle & 8-6.5" Bolt Circle Trailer Hub.
  • Permits 8" O.D, spools to be mounted on 2" (51mm) OD Spindles
  • Includes: Spindle adapter
  • For use with: wire feed welders

More Info

1    2    3    4    5