Best Steering Column Tools. Reviews December, 2020

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

Search only ABN brand name
ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

Current price: 26.99 USD


Check price and availability


Height: 9.9999999898 Inches

Length: 12.598425184 Inches

Width: 2.25196850164 Inches

Weight: 4.3431065614 pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column

More Info

Lisle 19940 Pivot Pin Remover

Search only Lisle brand name
Lisle 19940 Pivot Pin Remover

Current price: 8.91 USD


Check price and availability


Height: 3.3 Inches

Length: 2.2 Inches

Width: 0.9 Inches

Weight: 0.05 Pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack

More Info

ABN Steering Wheel Lock Plate Removal Tool

Search only ABN brand name
ABN Steering Wheel Lock Plate Removal Tool

Current price: 13.99 USD


Check price and availability


Height: 4.8 Inches

Length: 1.5 Inches

Width: 11.3 Inches

Weight: 1.2 pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack
  • Limited Lifetime Warranty
  • Allows for the removal and install on steering wheel lock plate
  • Includes 9/16" x 18 and M14 x 1.55MM adapters
  • Designed for use on air bagged equipped vehicles
  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate

More Info

A ABIGAIL Steering Wheel Lock Plate Removal Remover Tool

Search only A ABIGAIL brand name
A ABIGAIL Steering Wheel Lock Plate Removal Remover Tool

Current price: 11.99 USD


Check price and availability


  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack
  • Limited Lifetime Warranty
  • Allows for the removal and install on steering wheel lock plate
  • Includes 9/16" x 18 and M14 x 1.55MM adapters
  • Designed for use on air bagged equipped vehicles
  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate
  • 【Service】100% satisfaction guarantee, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • 【Size】Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • 【Application】For depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate.
  • 【Function】Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Designed for use on air bagged equipped vehicles.
  • 【High Quality】A ABIGAIL Steering Wheel Lock Plate is made made of premium quality materials which is rust and corrosion resistant. It gives the tools high strength and long time performance.

More Info

648748 Mstr Steering Wheel/Lock Plate, Silver

Search only Alltrade brand name
648748 Mstr Steering Wheel/Lock Plate, Silver

Current price: 55.49 USD


Check price and availability


Height: 3.1 Inches

Length: 15.7 Inches

Width: 12.6 Inches

Warranty: Manufacturer Warranty

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack
  • Limited Lifetime Warranty
  • Allows for the removal and install on steering wheel lock plate
  • Includes 9/16" x 18 and M14 x 1.55MM adapters
  • Designed for use on air bagged equipped vehicles
  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate
  • 【Service】100% satisfaction guarantee, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • 【Size】Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • 【Application】For depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate.
  • 【Function】Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Designed for use on air bagged equipped vehicles.
  • 【High Quality】A ABIGAIL Steering Wheel Lock Plate is made made of premium quality materials which is rust and corrosion resistant. It gives the tools high strength and long time performance.
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes lock plate removal tool
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Also includes lock plate removal tool
  • Includes universal Steering wheel Puller with 5 different pairs of cap screws to fit the different thread sizes found on most steering wheels
  • For servicing steering wheel and steering column components

More Info

Lisle 57340 Steering Wheel Lock Plate Tool

Search only Lisle brand name
Lisle 57340 Steering Wheel Lock Plate Tool

Current price: 20.97 USD

Saving: $1.72 (8%)


Check price and availability


Height: 1 Inches

Length: 9.25 Inches

Width: 5.5 Inches

Weight: 1.4 pounds

Warranty: LIMITED LIFE TIME WARRANTY

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack
  • Limited Lifetime Warranty
  • Allows for the removal and install on steering wheel lock plate
  • Includes 9/16" x 18 and M14 x 1.55MM adapters
  • Designed for use on air bagged equipped vehicles
  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate
  • 【Service】100% satisfaction guarantee, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • 【Size】Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • 【Application】For depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate.
  • 【Function】Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Designed for use on air bagged equipped vehicles.
  • 【High Quality】A ABIGAIL Steering Wheel Lock Plate is made made of premium quality materials which is rust and corrosion resistant. It gives the tools high strength and long time performance.
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes lock plate removal tool
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Also includes lock plate removal tool
  • Includes universal Steering wheel Puller with 5 different pairs of cap screws to fit the different thread sizes found on most steering wheels
  • For servicing steering wheel and steering column components
  • Fit type: Universal
  • Comes with standard and metric adapters, plus two puller frames
  • Fits domestic lock plates, including tilt and telescoping
  • Tool depresses lock plate for easy removal of lock ring

More Info

Powerbuilt Steering Wheel Lock Plate Remover - 648466

Search only Powerbuilt brand name
Powerbuilt Steering Wheel Lock Plate Remover - 648466

Current price: 18.33 USD

Saving: $3.66 (17%)


Check price and availability


Height: 9.75 Inches

Length: 1.25 Inches

Width: 4.88 Inches

Weight: 0.75 pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack
  • Limited Lifetime Warranty
  • Allows for the removal and install on steering wheel lock plate
  • Includes 9/16" x 18 and M14 x 1.55MM adapters
  • Designed for use on air bagged equipped vehicles
  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate
  • 【Service】100% satisfaction guarantee, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • 【Size】Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • 【Application】For depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate.
  • 【Function】Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Designed for use on air bagged equipped vehicles.
  • 【High Quality】A ABIGAIL Steering Wheel Lock Plate is made made of premium quality materials which is rust and corrosion resistant. It gives the tools high strength and long time performance.
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes lock plate removal tool
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Also includes lock plate removal tool
  • Includes universal Steering wheel Puller with 5 different pairs of cap screws to fit the different thread sizes found on most steering wheels
  • For servicing steering wheel and steering column components
  • Fit type: Universal
  • Comes with standard and metric adapters, plus two puller frames
  • Fits domestic lock plates, including tilt and telescoping
  • Tool depresses lock plate for easy removal of lock ring
  • Lifetime warranty
  • Reversible adapter includes 9/16 inch-18 and M14-1.5 threads
  • Allows removal of round wire snap ring that retains lock plate
  • Depresses lock plate
  • Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • Allows removal of round wire snap ring that retains lock plate
  • For depressing lock plates on GM and Chrysler vehicles

More Info

Performance Tool W80652 Steering Pivot Pin Remover

Search only Performance Tool brand name
Performance Tool W80652 Steering Pivot Pin Remover

Current price: 7.79 USD

Saving: $2.20 (22%)


Check price and availability


Weight: 0.1 pounds

Warranty: LIMITED WARRANTY

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack
  • Limited Lifetime Warranty
  • Allows for the removal and install on steering wheel lock plate
  • Includes 9/16" x 18 and M14 x 1.55MM adapters
  • Designed for use on air bagged equipped vehicles
  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate
  • 【Service】100% satisfaction guarantee, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • 【Size】Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • 【Application】For depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate.
  • 【Function】Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Designed for use on air bagged equipped vehicles.
  • 【High Quality】A ABIGAIL Steering Wheel Lock Plate is made made of premium quality materials which is rust and corrosion resistant. It gives the tools high strength and long time performance.
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes lock plate removal tool
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Also includes lock plate removal tool
  • Includes universal Steering wheel Puller with 5 different pairs of cap screws to fit the different thread sizes found on most steering wheels
  • For servicing steering wheel and steering column components
  • Fit type: Universal
  • Comes with standard and metric adapters, plus two puller frames
  • Fits domestic lock plates, including tilt and telescoping
  • Tool depresses lock plate for easy removal of lock ring
  • Lifetime warranty
  • Reversible adapter includes 9/16 inch-18 and M14-1.5 threads
  • Allows removal of round wire snap ring that retains lock plate
  • Depresses lock plate
  • Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • Allows removal of round wire snap ring that retains lock plate
  • For depressing lock plates on GM and Chrysler vehicles
  • Lifetime warranty
  • Makes tilt steering columns much easier to service
  • Applications: 1969 and newer GM, Chrysler and Ford cars and trucks with tilt or telescoping Saginaw type steering columns.

More Info

GEARWRENCH Replacement Lock Plate Remover for Steering Service Set 41620D - 3509D

Search only GearWrench brand name
GEARWRENCH Replacement Lock Plate Remover for Steering Service Set 41620D - 3509D

Current price: 32.05 USD

Saving: $9.45 (23%)


Check price and availability


Height: 1 Inches

Length: 7.9 Inches

Width: 5.7 Inches

Weight: 1.3 pounds

Warranty: 1 year manufacturer

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack
  • Limited Lifetime Warranty
  • Allows for the removal and install on steering wheel lock plate
  • Includes 9/16" x 18 and M14 x 1.55MM adapters
  • Designed for use on air bagged equipped vehicles
  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate
  • 【Service】100% satisfaction guarantee, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • 【Size】Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • 【Application】For depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate.
  • 【Function】Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Designed for use on air bagged equipped vehicles.
  • 【High Quality】A ABIGAIL Steering Wheel Lock Plate is made made of premium quality materials which is rust and corrosion resistant. It gives the tools high strength and long time performance.
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes lock plate removal tool
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Also includes lock plate removal tool
  • Includes universal Steering wheel Puller with 5 different pairs of cap screws to fit the different thread sizes found on most steering wheels
  • For servicing steering wheel and steering column components
  • Fit type: Universal
  • Comes with standard and metric adapters, plus two puller frames
  • Fits domestic lock plates, including tilt and telescoping
  • Tool depresses lock plate for easy removal of lock ring
  • Lifetime warranty
  • Reversible adapter includes 9/16 inch-18 and M14-1.5 threads
  • Allows removal of round wire snap ring that retains lock plate
  • Depresses lock plate
  • Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • Allows removal of round wire snap ring that retains lock plate
  • For depressing lock plates on GM and Chrysler vehicles
  • Lifetime warranty
  • Makes tilt steering columns much easier to service
  • Applications: 1969 and newer GM, Chrysler and Ford cars and trucks with tilt or telescoping Saginaw type steering columns.
  • Manufacturer: GEARWRENCH
  • Country of manufacture: United States
  • Auto & Truck Maintenance

More Info

OTC 7889 Steering Pivot Pin Remover

Search only OTC brand name
OTC 7889 Steering Pivot Pin Remover

Current price: 14.31 USD


Check price and availability


Height: 1 Inches

Length: 4.8 Inches

Width: 3.1 Inches

Weight: 0.1 pounds

Warranty: Limited lifetime warranty

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • Shipping weight: 2 oz.
  • Skin-packed
  • Includes an extra screw
  • Comes in skin-pack
  • Limited Lifetime Warranty
  • Allows for the removal and install on steering wheel lock plate
  • Includes 9/16" x 18 and M14 x 1.55MM adapters
  • Designed for use on air bagged equipped vehicles
  • Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate
  • 【Service】100% satisfaction guarantee, If you have any issues with the Steering Wheel Lock Plate Remover, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
  • 【Size】Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • 【Application】For depressing lock plates on GM and Chrysler vehicles, allows removal of round wire snap ring that retains lock plate.
  • 【Function】Steering Wheel Lock Plate Removal Tool. Designed to depress lock plate and remove steering wheel lock plate. Designed for use on air bagged equipped vehicles.
  • 【High Quality】A ABIGAIL Steering Wheel Lock Plate is made made of premium quality materials which is rust and corrosion resistant. It gives the tools high strength and long time performance.
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes lock plate removal tool
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Kit 36 includes 22-Piece for servicing steering wheel and steering column components
  • Storage case includes usage photos
  • Includes 5 different pairs of cap screws
  • Tool set for servicing steering wheel and steering column components
  • Also includes lock plate removal tool
  • Includes universal Steering wheel Puller with 5 different pairs of cap screws to fit the different thread sizes found on most steering wheels
  • For servicing steering wheel and steering column components
  • Fit type: Universal
  • Comes with standard and metric adapters, plus two puller frames
  • Fits domestic lock plates, including tilt and telescoping
  • Tool depresses lock plate for easy removal of lock ring
  • Lifetime warranty
  • Reversible adapter includes 9/16 inch-18 and M14-1.5 threads
  • Allows removal of round wire snap ring that retains lock plate
  • Depresses lock plate
  • Reversible adapter includes 9/16"-18and M14-1.5 threads.
  • Allows removal of round wire snap ring that retains lock plate
  • For depressing lock plates on GM and Chrysler vehicles
  • Lifetime warranty
  • Makes tilt steering columns much easier to service
  • Applications: 1969 and newer GM, Chrysler and Ford cars and trucks with tilt or telescoping Saginaw type steering columns.
  • Manufacturer: GEARWRENCH
  • Country of manufacture: United States
  • Auto & Truck Maintenance
  • Simplifies tilt steering column service procedures
  • Rugged, all metal construction ensures this versatile tool set will deliver reliable long-term service
  • Tool includes cup adapter, forcing screw, nut, and washer
  • For 1969 and up GM, Chrysler, and Ford vehicles with Saginaw steering columns
  • Steering Pivot Pin Remover

More Info

1    2    3    4    5    6    7    8    9    10