Best Steering Wheel Pullers. Reviews November, 2020

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

Search only ABN brand name
ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

Current price: 26.99 USD


Check price and availability


Height: 9.9999999898 Inches

Length: 12.598425184 Inches

Width: 2.25196850164 Inches

Weight: 4.3431065614 Pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column

More Info

Shankly Steering Wheel Puller Set (8 Piece), Professional Grade, 1.5” to 3.35” Inch Spread

Search only Shankly brand name
Shankly Steering Wheel Puller Set (8 Piece), Professional Grade, 1.5” to 3.35” Inch Spread

Current price: 26.99 USD


Check price and availability


  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.

More Info

WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

Search only WYNNsky brand name
WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

Current price: 25.99 USD


Check price and availability


Height: 1.75 Inches

Length: 10.75 Inches

Width: 8.25 Inches

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18×6’’, 3pcs 5/16’’ ×24×3-1/2’’, 2pcs 5/16’’ ×24×3’’, 3pcs M8×1.25×45MM, 2pcs M8×1.25×65MM, 2pcs M8×1.5×90MM, 3pcs M10×1.25×35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span.
  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.

More Info

Thorstone 46pcs Harmonic Balancer Puller Set, Flywheel -Crankshaft -Steering Wheel Pulley Puller

Search only Thorstone brand name
Thorstone 46pcs Harmonic Balancer Puller Set, Flywheel -Crankshaft -Steering Wheel Pulley Puller

Current price: 26.97 USD


Check price and availability


  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18×6’’, 3pcs 5/16’’ ×24×3-1/2’’, 2pcs 5/16’’ ×24×3’’, 3pcs M8×1.25×45MM, 2pcs M8×1.25×65MM, 2pcs M8×1.5×90MM, 3pcs M10×1.25×35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span.
  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.
  • 🚖After-sales service:If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.
  • 🚖Convenient Storage:Comes with a Heavy-duty blow-molded carrying case, help to protect and store Various parts conveniently.
  • 🚖Compatible with:help handling a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • 🚖Premium Material: Tool components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs & resist rust.
  • 🚖Multiple Uses: This versatile tool kit including 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications.

More Info

ABN Bolt Grip Set – Gear Puller, Steering Wheel Puller, Pulley Puller, Harmonic Balancer Puller, Crank Puller 43pc

Search only ABN brand name
ABN Bolt Grip Set – Gear Puller, Steering Wheel Puller, Pulley Puller, Harmonic Balancer Puller, Crank Puller 43pc

Current price: 59.99 USD


Check price and availability


Height: 11.2992125869 Inches

Length: 14.75196848889 Inches

Width: 2.99999999694 Inches

Weight: 3.73 Pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18×6’’, 3pcs 5/16’’ ×24×3-1/2’’, 2pcs 5/16’’ ×24×3’’, 3pcs M8×1.25×45MM, 2pcs M8×1.25×65MM, 2pcs M8×1.5×90MM, 3pcs M10×1.25×35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span.
  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.
  • 🚖After-sales service:If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.
  • 🚖Convenient Storage:Comes with a Heavy-duty blow-molded carrying case, help to protect and store Various parts conveniently.
  • 🚖Compatible with:help handling a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • 🚖Premium Material: Tool components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs & resist rust.
  • 🚖Multiple Uses: This versatile tool kit including 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization; Compartments include sizing labels for easy identification
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm
  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool; Can also handle 2 and 3-way bolt pulling applications

More Info

Lisle 45000 Steering Wheel Puller

Search only Lisle brand name
Lisle 45000 Steering Wheel Puller

Current price: 23.12 USD


Check price and availability


Height: 1 Inches

Length: 8.25 Inches

Width: 5 Inches

Weight: 1.3 Pounds

Warranty: Limited Lifetime

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18×6’’, 3pcs 5/16’’ ×24×3-1/2’’, 2pcs 5/16’’ ×24×3’’, 3pcs M8×1.25×45MM, 2pcs M8×1.25×65MM, 2pcs M8×1.5×90MM, 3pcs M10×1.25×35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span.
  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.
  • 🚖After-sales service:If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.
  • 🚖Convenient Storage:Comes with a Heavy-duty blow-molded carrying case, help to protect and store Various parts conveniently.
  • 🚖Compatible with:help handling a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • 🚖Premium Material: Tool components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs & resist rust.
  • 🚖Multiple Uses: This versatile tool kit including 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization; Compartments include sizing labels for easy identification
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm
  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool; Can also handle 2 and 3-way bolt pulling applications
  • Fit type: Universal
  • Screw pad protects end of steering shaft
  • Comes in a clam shell package
  • Heavy duty for long wear

More Info

OEMTOOLS 27017 Steering Wheel Puller

Search only OEM TOOLS brand name
OEMTOOLS 27017 Steering Wheel Puller

Current price: 18.14 USD


Check price and availability


Height: 2.2 Inches

Length: 9.3 Inches

Width: 7.3 Inches

Weight: 1.65 Pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18×6’’, 3pcs 5/16’’ ×24×3-1/2’’, 2pcs 5/16’’ ×24×3’’, 3pcs M8×1.25×45MM, 2pcs M8×1.25×65MM, 2pcs M8×1.5×90MM, 3pcs M10×1.25×35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span.
  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.
  • 🚖After-sales service:If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.
  • 🚖Convenient Storage:Comes with a Heavy-duty blow-molded carrying case, help to protect and store Various parts conveniently.
  • 🚖Compatible with:help handling a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • 🚖Premium Material: Tool components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs & resist rust.
  • 🚖Multiple Uses: This versatile tool kit including 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization; Compartments include sizing labels for easy identification
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm
  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool; Can also handle 2 and 3-way bolt pulling applications
  • Fit type: Universal
  • Screw pad protects end of steering shaft
  • Comes in a clam shell package
  • Heavy duty for long wear
  • Applicable for professional auto mechanics as well as heavy duty applications
  • Comes in sturdy blow mold storage case
  • Heat treated for strength
  • Set includes yoke, pressure screw, 3 sets of pulling screws with washers and swivel sizes 5/16-Inch by 18, 5/16-Inch by 24, 3/8-Inch by 16
  • Steering wheel puller set
  • Comes in a sturdy blow-mold storage case
  • Bolt sizes include: 5/16 Inch x 18, 5/6 Inch x 24, and 3/8 Inch x 16
  • Designed to fit many major makes and automobiles

More Info

ATP 13 Piece Harmonic Balancer Steering Wheel Puller Kit

Search only ATP brand name
ATP 13 Piece Harmonic Balancer Steering Wheel Puller Kit

Current price: 17.79 USD


Check price and availability


  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18×6’’, 3pcs 5/16’’ ×24×3-1/2’’, 2pcs 5/16’’ ×24×3’’, 3pcs M8×1.25×45MM, 2pcs M8×1.25×65MM, 2pcs M8×1.5×90MM, 3pcs M10×1.25×35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span.
  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.
  • 🚖After-sales service:If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.
  • 🚖Convenient Storage:Comes with a Heavy-duty blow-molded carrying case, help to protect and store Various parts conveniently.
  • 🚖Compatible with:help handling a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • 🚖Premium Material: Tool components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs & resist rust.
  • 🚖Multiple Uses: This versatile tool kit including 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization; Compartments include sizing labels for easy identification
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm
  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool; Can also handle 2 and 3-way bolt pulling applications
  • Fit type: Universal
  • Screw pad protects end of steering shaft
  • Comes in a clam shell package
  • Heavy duty for long wear
  • Applicable for professional auto mechanics as well as heavy duty applications
  • Comes in sturdy blow mold storage case
  • Heat treated for strength
  • Set includes yoke, pressure screw, 3 sets of pulling screws with washers and swivel sizes 5/16-Inch by 18, 5/16-Inch by 24, 3/8-Inch by 16
  • Steering wheel puller set
  • Comes in a sturdy blow-mold storage case
  • Bolt sizes include: 5/16 Inch x 18, 5/6 Inch x 24, and 3/8 Inch x 16
  • Designed to fit many major makes and automobiles
  • Blow Mold Case for Storage.
  • Center screw features a floating, removable swivel.
  • Tool allows for even pressure which prevents damage to parts, Yoke allows for either 2 or 3-hole application.
  • All bits are machine precision, hardened, and tempered.
  • Includes the 1 center screw, 1 Floating swivel, 2 5/16 x 4 bolts, 2 1/4 x 3 bolts, 3 1/4 x 2 bolts, and 3 5/16 x 2 bolts.

More Info

HFS (R) 46 Pcs Harmonic Balancer Puller - Gear Puller, Crank Shaft Pulley, Steering Wheel Kit Pulley Yoke Crank, Storage Case

Search only Hardware Factory Store brand name
HFS (R) 46 Pcs Harmonic Balancer Puller - Gear Puller, Crank Shaft Pulley, Steering Wheel Kit Pulley Yoke Crank, Storage Case

Current price: 22.5 USD


Check price and availability


Height: 8.25 Inches

Length: 10.75 Inches

Width: 1.75 Inches

Weight: 4.5 Pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18×6’’, 3pcs 5/16’’ ×24×3-1/2’’, 2pcs 5/16’’ ×24×3’’, 3pcs M8×1.25×45MM, 2pcs M8×1.25×65MM, 2pcs M8×1.5×90MM, 3pcs M10×1.25×35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span.
  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.
  • 🚖After-sales service:If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.
  • 🚖Convenient Storage:Comes with a Heavy-duty blow-molded carrying case, help to protect and store Various parts conveniently.
  • 🚖Compatible with:help handling a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • 🚖Premium Material: Tool components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs & resist rust.
  • 🚖Multiple Uses: This versatile tool kit including 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization; Compartments include sizing labels for easy identification
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm
  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool; Can also handle 2 and 3-way bolt pulling applications
  • Fit type: Universal
  • Screw pad protects end of steering shaft
  • Comes in a clam shell package
  • Heavy duty for long wear
  • Applicable for professional auto mechanics as well as heavy duty applications
  • Comes in sturdy blow mold storage case
  • Heat treated for strength
  • Set includes yoke, pressure screw, 3 sets of pulling screws with washers and swivel sizes 5/16-Inch by 18, 5/16-Inch by 24, 3/8-Inch by 16
  • Steering wheel puller set
  • Comes in a sturdy blow-mold storage case
  • Bolt sizes include: 5/16 Inch x 18, 5/6 Inch x 24, and 3/8 Inch x 16
  • Designed to fit many major makes and automobiles
  • Blow Mold Case for Storage.
  • Center screw features a floating, removable swivel.
  • Tool allows for even pressure which prevents damage to parts, Yoke allows for either 2 or 3-hole application.
  • All bits are machine precision, hardened, and tempered.
  • Includes the 1 center screw, 1 Floating swivel, 2 5/16 x 4 bolts, 2 1/4 x 3 bolts, 3 1/4 x 2 bolts, and 3 5/16 x 2 bolts.
  • [SET INCLUDES]: Set includes yoke, pressure screw, and pulling screws in a molded storage case.
  • [YOKE]: Yoke is heat-treated alloy steel for strength and durability.
  • [FLOATING SWIVEL]: The floating swivel prevents damage to the shaft ends.
  • [BOLTS]: 30 Different size bolts included.
  • [FEATURES]: Kit features four yoke slots allowing unit to be used for two or three-hole applications.

More Info

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

Search only brand name
Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

Current price: 22.49 USD

Saving: $3.37 (13%)


Check price and availability


Height: 1.8 Inches

Length: 10.75 Inches

Width: 8.1 Inches

Weight: 2.16 Pounds

  • PACKAGE CONTENTS: Steering wheel removal kit package includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements (M8-1.25 x 90 mm, 3/8"-16 x 3-1/2", 5/16"-24 x 3-1/2", 5/16"-18 x 4") and a carrying case for your convenience; Pivot pin removing tool not included
  • EASY STORAGE: Heavy-duty 12.6” x 2.25” x 10” inch (32cm x 5.7cm x 25.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading; Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion; We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks; Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable); Compresses locking plate spring to allow removal of retaining clip; Allows access to turn signal switch and SIR modules on current GM vehicles; Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs
  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels; This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column
  • COMPATIBLE FOR MANY VEHICLE TYPES: Shankly’s GM steering wheel puller can be used for many types of makes and models including GM, Vauxhal, Opel and Ford Vehicles.
  • HANDY STORAGE CASE: This universal steering wheel puller comes with a handy carrying case that makes transport, organization and transport a snap.
  • HEAT TREATED FOR STRENGTH: Shankly’s steering wheel puller tool is heat treated for strength and is a professional grade tool set and constructed heavy duty use.
  • USEFUL SPREAD: Shankly’s steering wheel puller kit has a minimum / maximum spread of 38 / 85MM or 1.5” / 3.35” inches to ensure the tool set can be used for many types of steering wheel puller jobs.
  • COMPLETE WHEEL PULLER SET: Shankly’s steering wheel puller set features two-leg puller with two pairs of legs and two thrust caps. A complete wheel puller set that works on various makes and models.
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18×6’’, 3pcs 5/16’’ ×24×3-1/2’’, 2pcs 5/16’’ ×24×3’’, 3pcs M8×1.25×45MM, 2pcs M8×1.25×65MM, 2pcs M8×1.5×90MM, 3pcs M10×1.25×35MM; different size of washer: 6pcs 8mm ID, 6pcs 10mm ID, 4pcs 12mm ID.
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening.
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span.
  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application.
  • 🚖After-sales service:If there's any question about this product, feel free to contact us, we'll give you an exact answer within 24h.
  • 🚖Convenient Storage:Comes with a Heavy-duty blow-molded carrying case, help to protect and store Various parts conveniently.
  • 🚖Compatible with:help handling a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • 🚖Premium Material: Tool components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs & resist rust.
  • 🚖Multiple Uses: This versatile tool kit including 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization; Compartments include sizing labels for easy identification
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm
  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool; Can also handle 2 and 3-way bolt pulling applications
  • Fit type: Universal
  • Screw pad protects end of steering shaft
  • Comes in a clam shell package
  • Heavy duty for long wear
  • Applicable for professional auto mechanics as well as heavy duty applications
  • Comes in sturdy blow mold storage case
  • Heat treated for strength
  • Set includes yoke, pressure screw, 3 sets of pulling screws with washers and swivel sizes 5/16-Inch by 18, 5/16-Inch by 24, 3/8-Inch by 16
  • Steering wheel puller set
  • Comes in a sturdy blow-mold storage case
  • Bolt sizes include: 5/16 Inch x 18, 5/6 Inch x 24, and 3/8 Inch x 16
  • Designed to fit many major makes and automobiles
  • Blow Mold Case for Storage.
  • Center screw features a floating, removable swivel.
  • Tool allows for even pressure which prevents damage to parts, Yoke allows for either 2 or 3-hole application.
  • All bits are machine precision, hardened, and tempered.
  • Includes the 1 center screw, 1 Floating swivel, 2 5/16 x 4 bolts, 2 1/4 x 3 bolts, 3 1/4 x 2 bolts, and 3 5/16 x 2 bolts.
  • [SET INCLUDES]: Set includes yoke, pressure screw, and pulling screws in a molded storage case.
  • [YOKE]: Yoke is heat-treated alloy steel for strength and durability.
  • [FLOATING SWIVEL]: The floating swivel prevents damage to the shaft ends.
  • [BOLTS]: 30 Different size bolts included.
  • [FEATURES]: Kit features four yoke slots allowing unit to be used for two or three-hole applications.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience
  • [Built to Last] Heat-treated carbon steel ensures maximum strength; Chrome and black oxide finishes resist rust and corrosion; Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length; Bolts come in a mixture of 16, 18, 24, and 28 thread pitch
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts

More Info

1    2    3    4    5    6    7    8    9    10