Best Studio Subwoofers. Reviews August, 2020

JBL Professional LSR310S -Channel Studio Subwoofer, 10-Inch

Search only JBL Professional brand name
JBL Professional LSR310S -Channel Studio Subwoofer, 10-Inch

Current price: 399 USD


Check price and availability


Height: 15 Inches

Length: 17.65 Inches

Width: 15.65 Inches

Weight: 34 Pounds

Warranty: Jbl limited warrantythe jbl warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. Jbl amplifiers are warranted for three years from the date of the original purchase. Enclosures and all other jbl products are warranted for two years from the date of the original purchase. Your jbl warranty protects the original owner and all subsequent owners as long as: a. ) your jbl product has been purchased in the continental united states, hawaii or alaska. (this warranty does not apply to jbl products purchased elsewhere except for purchases by military outlets. Other purchasers should contact the local jbl distributor for warranty information. ) and b. ) the original dated bill of sale is presented whenever warranty service is required. Except as specified below, your jbl warranty covers all defects in material and workmanship. The following are not covered: damage caused by accident, misuse, abuse, product modification or neglect; damage occurring during shipment; damage resulting from failure to follow instructions contained in your instruction manual; damage resulting from the performance of repairs by someone not authorized by jbl; claims based upon any misrepresentations by the seller; any jbl product on which the serial number has been defaced, modified or removed. Jbl will pay all labor and material expenses for all repairs covered by this warranty.

  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels

More Info

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater

Search only Monoprice brand name
Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater

Current price: 73.59 USD

Saving: $12.70 (15%)


Check price and availability


Height: 15.4 Inches

Length: 14.8 Inches

Width: 16.1 Inches

Weight: 3 Pounds

Warranty: 1

  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.

More Info

Polk Audio PSW10 10" Powered Subwoofer - Power Port Technology | Up to 100 Watts | Big Bass in Compact Design | Easy Setup with Home Theater Systems

Search only Polk Audio brand name
Polk Audio PSW10 10

Current price: 129 USD


Check price and availability


Height: 14.4 Inches

Length: 16.2 Inches

Width: 14 Inches

Weight: 26 Pounds

Warranty: 5 years, 3 years on amplifier, parts & labor

  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room

More Info

Yamaha HS8 Studio Subwoofer

Search only Yamaha brand name
Yamaha HS8 Studio Subwoofer

Current price: 549.99 USD


Check price and availability


Height: 18.5 Inches

Length: 16 Inches

Width: 18 Inches

Weight: 32.738645907 Pounds

Warranty: One year parts and labor.

  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • PHASE switch 
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • High-power 150W amplifier 
  • 22Hz - 150Hz frequency response
  • 8inch bass-reflex powered subwoofer

More Info

Yamaha 10" 100W Powered Subwoofer - Black (NS-SW100BL)

Search only Yamaha Audio brand name
Yamaha 10

Current price: 179.95 USD

Saving: $20.00 (10%)


Check price and availability


Height: 13.9 Inches

Length: 16.2 Inches

Width: 13.9 Inches

Weight: 26.5 Pounds

Warranty: NA

  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • PHASE switch 
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • High-power 150W amplifier 
  • 22Hz - 150Hz frequency response
  • 8inch bass-reflex powered subwoofer
  • Stylish addition to any room
  • 10” cone woofer
  • Advanced YST II (Yamaha Active Servo Technology II)
  • New twisted flare port contributes to clear and tight bass

More Info

Edifier R1850DB Active Bookshelf Speakers with Bluetooth and Optical Input - 2.0 Studio Monitor Speaker - Built-in Amplifier with Subwoofer Line Out

Search only Edifier brand name
Edifier R1850DB Active Bookshelf Speakers with Bluetooth and Optical Input - 2.0 Studio Monitor Speaker - Built-in Amplifier with Subwoofer Line Out

Current price: 199.99 USD


Check price and availability


Height: 10 Inches

Length: 8.9 Inches

Width: 6.1 Inches

Warranty: 1

  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • PHASE switch 
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • High-power 150W amplifier 
  • 22Hz - 150Hz frequency response
  • 8inch bass-reflex powered subwoofer
  • Stylish addition to any room
  • 10” cone woofer
  • Advanced YST II (Yamaha Active Servo Technology II)
  • New twisted flare port contributes to clear and tight bass
  • 2 YEAR - high quality and reliability with hassle-free parts and labor for two years in USA and Canada
  • WIRELESS REMOTE – Handy compact remote control for input selection volume adjustment and track control (Bluetooth)
  • TREBLE/BASS CONTROL SUB-LINE OUT Adjust bass treble volume and toggle inputs on rear panel Need a little more oomph? Add a subwoofer to your 2 0 setup by simply connecting to the sub-out jack
  • BLUETOOTH V4 0 - Latest wireless technology for playing from phones tablets or laptops
  • DIGITAL / ANALOG INPUTS – RCA/Aux for PC turntables etc Optical/Coaxial for lossless connection Bluetooth for convenience

More Info

Sony SACS9 10-Inch Active Subwoofer,Black

Search only Sony brand name
Sony SACS9 10-Inch Active Subwoofer,Black

Current price: 198 USD


Check price and availability


Height: 17.3 Inches

Length: 18.7 Inches

Width: 14.8 Inches

Weight: 21 Pounds

  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • PHASE switch 
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • High-power 150W amplifier 
  • 22Hz - 150Hz frequency response
  • 8inch bass-reflex powered subwoofer
  • Stylish addition to any room
  • 10” cone woofer
  • Advanced YST II (Yamaha Active Servo Technology II)
  • New twisted flare port contributes to clear and tight bass
  • 2 YEAR - high quality and reliability with hassle-free parts and labor for two years in USA and Canada
  • WIRELESS REMOTE – Handy compact remote control for input selection volume adjustment and track control (Bluetooth)
  • TREBLE/BASS CONTROL SUB-LINE OUT Adjust bass treble volume and toggle inputs on rear panel Need a little more oomph? Add a subwoofer to your 2 0 setup by simply connecting to the sub-out jack
  • BLUETOOTH V4 0 - Latest wireless technology for playing from phones tablets or laptops
  • DIGITAL / ANALOG INPUTS – RCA/Aux for PC turntables etc Optical/Coaxial for lossless connection Bluetooth for convenience
  • In the box: RCA cord, Instruction manual
  • Speaker and Line Level Inputs, Frequency Response 28-200 Hz
  • 10 inches Foamed-Mica Cellular Reinforced Woofer
  • 115 Watt, Amplified Subwoofer (6 ohms, 80 Hz, 10% THD).Compatible with High-Resolution Audio

More Info

Elac SUB1010 120 Watt 10" Powered Subwoofer, Black, SUB1010-BK

Search only Elac brand name
Elac SUB1010 120 Watt 10

Current price: 118.39 USD

Saving: $11.59 (9%)


Check price and availability


Height: 13.56 Inches

Length: 12.19 Inches

Width: 13.19 Inches

Warranty: 3 year manufacturer warranty

  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • PHASE switch 
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • High-power 150W amplifier 
  • 22Hz - 150Hz frequency response
  • 8inch bass-reflex powered subwoofer
  • Stylish addition to any room
  • 10” cone woofer
  • Advanced YST II (Yamaha Active Servo Technology II)
  • New twisted flare port contributes to clear and tight bass
  • 2 YEAR - high quality and reliability with hassle-free parts and labor for two years in USA and Canada
  • WIRELESS REMOTE – Handy compact remote control for input selection volume adjustment and track control (Bluetooth)
  • TREBLE/BASS CONTROL SUB-LINE OUT Adjust bass treble volume and toggle inputs on rear panel Need a little more oomph? Add a subwoofer to your 2 0 setup by simply connecting to the sub-out jack
  • BLUETOOTH V4 0 - Latest wireless technology for playing from phones tablets or laptops
  • DIGITAL / ANALOG INPUTS – RCA/Aux for PC turntables etc Optical/Coaxial for lossless connection Bluetooth for convenience
  • In the box: RCA cord, Instruction manual
  • Speaker and Line Level Inputs, Frequency Response 28-200 Hz
  • 10 inches Foamed-Mica Cellular Reinforced Woofer
  • 115 Watt, Amplified Subwoofer (6 ohms, 80 Hz, 10% THD).Compatible with High-Resolution Audio
  • Driver: 10" Low Throw dynamic woofer with these inputs: L/R/LFE/speaker level
  • Frequency response: 38hz-200hz; crossover frequency: 40hz-200hz
  • Amplifier power: 120 watts peak/ 60 watts RMS
  • Amplifier Type: Class AB
  • Enclosure Type: bass reflex

More Info

Edifier R1280DBs Active Bluetooth Bookshelf Speakers - Optical Input - 2.0 Wireless Studio Monitor Speaker - 42W RMS with Subwoofer Line Out - Black

Search only Edifier brand name
Edifier R1280DBs Active Bluetooth Bookshelf Speakers - Optical Input - 2.0 Wireless Studio Monitor Speaker - 42W RMS with Subwoofer Line Out - Black

Current price: 139.99 USD


Check price and availability


  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • PHASE switch 
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • High-power 150W amplifier 
  • 22Hz - 150Hz frequency response
  • 8inch bass-reflex powered subwoofer
  • Stylish addition to any room
  • 10” cone woofer
  • Advanced YST II (Yamaha Active Servo Technology II)
  • New twisted flare port contributes to clear and tight bass
  • 2 YEAR - high quality and reliability with hassle-free parts and labor for two years in USA and Canada
  • WIRELESS REMOTE – Handy compact remote control for input selection volume adjustment and track control (Bluetooth)
  • TREBLE/BASS CONTROL SUB-LINE OUT Adjust bass treble volume and toggle inputs on rear panel Need a little more oomph? Add a subwoofer to your 2 0 setup by simply connecting to the sub-out jack
  • BLUETOOTH V4 0 - Latest wireless technology for playing from phones tablets or laptops
  • DIGITAL / ANALOG INPUTS – RCA/Aux for PC turntables etc Optical/Coaxial for lossless connection Bluetooth for convenience
  • In the box: RCA cord, Instruction manual
  • Speaker and Line Level Inputs, Frequency Response 28-200 Hz
  • 10 inches Foamed-Mica Cellular Reinforced Woofer
  • 115 Watt, Amplified Subwoofer (6 ohms, 80 Hz, 10% THD).Compatible with High-Resolution Audio
  • Driver: 10" Low Throw dynamic woofer with these inputs: L/R/LFE/speaker level
  • Frequency response: 38hz-200hz; crossover frequency: 40hz-200hz
  • Amplifier power: 120 watts peak/ 60 watts RMS
  • Amplifier Type: Class AB
  • Enclosure Type: bass reflex
  • 2 YEAR WARRANTY - Guaranteed high quality and reliability with hassle-free parts and labor warranty for two years in USA and Canada.
  • UPDATED REMOTE CONTROL - Wireless remote for easy control of volume, mute/unmute, switch to OPT/COAX mode, line-in, and Bluetooth modes. Bass, treble, and volume control located on the side panel.
  • DISTORTION-FREE SOUND - Fill your room with beautiful sound with its 42W continuous undistorted power, 13mm silk dome tweeter unit, and 4-inch sub-woofer unit. Enhance your listing experience with Soundfield Spatializer.
  • SUB OUT AND OPT/COAX INPUTS - Subwoofer output with built-in auto crossover detection. Optical and coaxial inputs to ensure a lossless connection to TVs and computers.
  • BLUETOOTH 5.0 - Pair the speaker with your smartphone, tablet, Mac, or laptop to play music wirelessly, no need to deal with messy wires.

More Info

Edifier R1280Ts Powered Bookshelf Speakers - 2.0 Stereo Active Near Field Monitors - Studio Monitor Speaker - 42 Watts RMS with Subwoofer Line Out - Wooden Enclosure

Search only Edifier brand name
Edifier R1280Ts Powered Bookshelf Speakers - 2.0 Stereo Active Near Field Monitors - Studio Monitor Speaker - 42 Watts RMS with Subwoofer Line Out - Wooden Enclosure

Current price: 99.99 USD


Check price and availability


  • Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!
  • Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
  • Inputs: balanced XLR (x2) and TRS (x2)
  • Purchase includes: studio monitor, power cable, and set-up guide
  • The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
  • Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
  • The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
  • Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
  • Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
  • The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • PHASE switch 
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • High-power 150W amplifier 
  • 22Hz - 150Hz frequency response
  • 8inch bass-reflex powered subwoofer
  • Stylish addition to any room
  • 10” cone woofer
  • Advanced YST II (Yamaha Active Servo Technology II)
  • New twisted flare port contributes to clear and tight bass
  • 2 YEAR - high quality and reliability with hassle-free parts and labor for two years in USA and Canada
  • WIRELESS REMOTE – Handy compact remote control for input selection volume adjustment and track control (Bluetooth)
  • TREBLE/BASS CONTROL SUB-LINE OUT Adjust bass treble volume and toggle inputs on rear panel Need a little more oomph? Add a subwoofer to your 2 0 setup by simply connecting to the sub-out jack
  • BLUETOOTH V4 0 - Latest wireless technology for playing from phones tablets or laptops
  • DIGITAL / ANALOG INPUTS – RCA/Aux for PC turntables etc Optical/Coaxial for lossless connection Bluetooth for convenience
  • In the box: RCA cord, Instruction manual
  • Speaker and Line Level Inputs, Frequency Response 28-200 Hz
  • 10 inches Foamed-Mica Cellular Reinforced Woofer
  • 115 Watt, Amplified Subwoofer (6 ohms, 80 Hz, 10% THD).Compatible with High-Resolution Audio
  • Driver: 10" Low Throw dynamic woofer with these inputs: L/R/LFE/speaker level
  • Frequency response: 38hz-200hz; crossover frequency: 40hz-200hz
  • Amplifier power: 120 watts peak/ 60 watts RMS
  • Amplifier Type: Class AB
  • Enclosure Type: bass reflex
  • 2 YEAR WARRANTY - Guaranteed high quality and reliability with hassle-free parts and labor warranty for two years in USA and Canada.
  • UPDATED REMOTE CONTROL - Wireless remote for easy control of volume, mute/unmute, switch to OPT/COAX mode, line-in, and Bluetooth modes. Bass, treble, and volume control located on the side panel.
  • DISTORTION-FREE SOUND - Fill your room with beautiful sound with its 42W continuous undistorted power, 13mm silk dome tweeter unit, and 4-inch sub-woofer unit. Enhance your listing experience with Soundfield Spatializer.
  • SUB OUT AND OPT/COAX INPUTS - Subwoofer output with built-in auto crossover detection. Optical and coaxial inputs to ensure a lossless connection to TVs and computers.
  • BLUETOOTH 5.0 - Pair the speaker with your smartphone, tablet, Mac, or laptop to play music wirelessly, no need to deal with messy wires.
  • 2 YEAR WARRANTY - Guaranteed high quality and reliability with hassle-free parts and labor warranty for two years in USA and Canada.
  • UPDATED REMOTE CONTROL - Adjust volume, mute/unmute from across the room. Bass, treble, and volume control located on the side panel. Enhance your listing experience with Soundfield Spatializer button.
  • SUPERIOR SOUND QUALITY - 42W continuous undistorted power, 4-inch sub-woofer unit and 13mm silk dome tweeter unit ensure strong bass and bring more impactful sound.
  • DUAL RCA INPUTS - Easily connect to any devices with RCA to RCA/3.5 mm-RCA audio cable. Connect to two devices at the same time, no more plugging and unplugging. (None Bluetooth version)
  • EXTRA SUB-OUT PORT - A Subwoofer output with automatic detection for connecting an external extra active subwoofer. A built-in crossover is activated when the subwoofer is connected.

More Info

1    2    3    4    5    6    7    8    9    10