Best Suspension Chassis Kits. Reviews December, 2020

Superlift Suspension | 40009 | 2 inch GM Front Leveling Kit - 1999-2006 1500 2WD with Front Coil Suspension

Search only Superlift Suspension brand name
Superlift Suspension | 40009 | 2 inch GM Front Leveling Kit - 1999-2006 1500 2WD with Front Coil Suspension

Current price: 71.91 USD


Check price and availability


Height: 5.5 Inches

Length: 16 Inches

Width: 8 Inches

Weight: 3 Pounds

Warranty: Limited Lifetime

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;

More Info

AKM Dodge Ram Lift Kit 3" Front + 2" Rear Full Lift Kits For Dodge Ram 1500 4WD,3 Inch Front Strut Spacers and 2 Inch Rear Lift Spacer for 2009-2018 Dodge Ram Suspension Leveling Kits

Search only AKM brand name
AKM Dodge Ram Lift Kit 3

Current price: 89.99 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.

More Info

Supreme Suspensions - Full Lift Kit for 2007-2020 Silverado Sierra 1500 3.5" Front Lift Strut Spacers + 2" Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims (Black)

Search only Supreme Suspensions brand name
Supreme Suspensions - Full Lift Kit for 2007-2020 Silverado Sierra 1500 3.5

Current price: 239.95 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 3.5 inch front and 2 inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed - rear lift height will vary depending on factory block size being replaced.
  • CONTENTS: (2x) Aluminum Front Top Strut Spacers, (2x) Delrin Front Bottom Strut Spacers, (2x) Steel Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • COMPATIBLE WITH 2007 - 2020 Silverado 1500 6-Lug (2WD 4WD) and 2007 - 2020 Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.

More Info

Supreme Suspensions - Front Leveling Kit for 1994-2018 Dodge Ram 1500 2.5" Front Lift Spring Spacers 2WD (Black)

Search only Supreme Suspensions brand name
Supreme Suspensions - Front Leveling Kit for 1994-2018 Dodge Ram 1500 2.5

Current price: 84.95 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 3.5 inch front and 2 inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed - rear lift height will vary depending on factory block size being replaced.
  • CONTENTS: (2x) Aluminum Front Top Strut Spacers, (2x) Delrin Front Bottom Strut Spacers, (2x) Steel Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • COMPATIBLE WITH 2007 - 2020 Silverado 1500 6-Lug (2WD 4WD) and 2007 - 2020 Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools.
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack.
  • FITMENT: 1994 - 2018 Dodge Ram 1500 (2WD). NOT compatible with Extended Cab, Mega Cab Models or 2013+ Ram 1500 models equipped with Active-Level Four-Corner Air Suspension.

More Info

Supreme Suspensions - Full Lift Kit for 2004-2020 Ford F-150 [4WD] 2.5" Front Aircraft Billet Strut Spacers + 1.5" Rear Lift Steel Blocks + U-Bolts (Black)

Search only Supreme Suspensions brand name
Supreme Suspensions - Full Lift Kit for 2004-2020 Ford F-150 [4WD] 2.5

Current price: 169.95 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 3.5 inch front and 2 inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed - rear lift height will vary depending on factory block size being replaced.
  • CONTENTS: (2x) Aluminum Front Top Strut Spacers, (2x) Delrin Front Bottom Strut Spacers, (2x) Steel Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • COMPATIBLE WITH 2007 - 2020 Silverado 1500 6-Lug (2WD 4WD) and 2007 - 2020 Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools.
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack.
  • FITMENT: 1994 - 2018 Dodge Ram 1500 (2WD). NOT compatible with Extended Cab, Mega Cab Models or 2013+ Ram 1500 models equipped with Active-Level Four-Corner Air Suspension.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. *An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 2.5 inch front and 1.5 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
  • CONTENTS: (2x) T6 Billet Aluminum Front Lift Strut Spacers, (2x) High Strength Steel Rear Lift Blocks, (4x) Zinc Phosphate Coated Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 2004 - 2020 Ford F-150 (4WD*). *Does NOT Fit FX4 and 2004 Heritage Models. NOTE: 4WD models come with a 1.5" factory block installed, which will be replaced by our 3" lift block resulting in a 1.5" additional rear lift.

More Info

Supreme Suspensions - 1" to 3" Adjustable Front Steel Torsion Keys for 2004-2012 Chevrolet Colorado/GMC Canyon Suspension Leveling Lift Kit [2WD + 4WD]

Search only Supreme Suspensions brand name
Supreme Suspensions - 1

Current price: 84.95 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 3.5 inch front and 2 inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed - rear lift height will vary depending on factory block size being replaced.
  • CONTENTS: (2x) Aluminum Front Top Strut Spacers, (2x) Delrin Front Bottom Strut Spacers, (2x) Steel Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • COMPATIBLE WITH 2007 - 2020 Silverado 1500 6-Lug (2WD 4WD) and 2007 - 2020 Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools.
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack.
  • FITMENT: 1994 - 2018 Dodge Ram 1500 (2WD). NOT compatible with Extended Cab, Mega Cab Models or 2013+ Ram 1500 models equipped with Active-Level Four-Corner Air Suspension.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. *An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 2.5 inch front and 1.5 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
  • CONTENTS: (2x) T6 Billet Aluminum Front Lift Strut Spacers, (2x) High Strength Steel Rear Lift Blocks, (4x) Zinc Phosphate Coated Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 2004 - 2020 Ford F-150 (4WD*). *Does NOT Fit FX4 and 2004 Heritage Models. NOTE: 4WD models come with a 1.5" factory block installed, which will be replaced by our 3" lift block resulting in a 1.5" additional rear lift.
  • BENEFITS: Improves the look of your truck and increases ground clearance, so you can fit larger tires. TWICE as strong as factory keys and indexed for lift. Adjustable lift height lifts according to your preference.
  • INSTALLATION: Easy installation takes 1 - 2 hours. A torsion bar puller (can be rented at most chain auto stores), or 5 ton gear puller is required for install.
  • TECHNICAL NOTES: 1 - 3 inch front suspension lift. An alignment is always recommended after altering the height of your vehicle.
  • CONTENTS: 2x High-Strength Steel Front Lift MAX-Torsion Keys, Installation Instructions and Pro Pack.
  • COMPATIBLE WITH 2004 - 2012 Chevrolet Colorado and GMC Canyon (2WD* / 4WD). *Will only fit 2WD Z71 model with Torsion Bar Suspension System.

More Info

1"-3" Torsion Bars Key with Shock Extender Brackets for Chevy GMC Silverado Sierra 1500HD 2500HD 3500HD 2001-2010, Dynofit 1-3 Inch Forged Adjustable Leveling Lift Kits Suspension Lift Kit Duramax

Search only dynofit brand name
1

Current price: 66.9 USD


Check price and availability


Warranty: 2 Year Quality Warranty and Brand Gurantee

  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 3.5 inch front and 2 inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed - rear lift height will vary depending on factory block size being replaced.
  • CONTENTS: (2x) Aluminum Front Top Strut Spacers, (2x) Delrin Front Bottom Strut Spacers, (2x) Steel Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • COMPATIBLE WITH 2007 - 2020 Silverado 1500 6-Lug (2WD 4WD) and 2007 - 2020 Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools.
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack.
  • FITMENT: 1994 - 2018 Dodge Ram 1500 (2WD). NOT compatible with Extended Cab, Mega Cab Models or 2013+ Ram 1500 models equipped with Active-Level Four-Corner Air Suspension.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. *An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 2.5 inch front and 1.5 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
  • CONTENTS: (2x) T6 Billet Aluminum Front Lift Strut Spacers, (2x) High Strength Steel Rear Lift Blocks, (4x) Zinc Phosphate Coated Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 2004 - 2020 Ford F-150 (4WD*). *Does NOT Fit FX4 and 2004 Heritage Models. NOTE: 4WD models come with a 1.5" factory block installed, which will be replaced by our 3" lift block resulting in a 1.5" additional rear lift.
  • BENEFITS: Improves the look of your truck and increases ground clearance, so you can fit larger tires. TWICE as strong as factory keys and indexed for lift. Adjustable lift height lifts according to your preference.
  • INSTALLATION: Easy installation takes 1 - 2 hours. A torsion bar puller (can be rented at most chain auto stores), or 5 ton gear puller is required for install.
  • TECHNICAL NOTES: 1 - 3 inch front suspension lift. An alignment is always recommended after altering the height of your vehicle.
  • CONTENTS: 2x High-Strength Steel Front Lift MAX-Torsion Keys, Installation Instructions and Pro Pack.
  • COMPATIBLE WITH 2004 - 2012 Chevrolet Colorado and GMC Canyon (2WD* / 4WD). *Will only fit 2WD Z71 model with Torsion Bar Suspension System.
  • ★ Brand Guarantee: 2 years warranty and feel free contact us with any problem, reply in 24 hours
  • ★ Contents: 2 torsion keys and 2 struts with Pro Shock-Proof box(Instruction included)
  • ★ Premium Material: Hard forged steel, excellent resistance to corrosion by powder coated surface and cold forged. Good looking on your truck and provide enough ground balance
  • ★ Easy Installation: installed in 1-2 hours and no special tools needed, true 1-3" lift standard
  • ★ Fits Chart: Chevy GMC Silverado Sierra 1500HD 2500HD 3500HD 2001-2010 with 8 Lugs Only, more fitment details about this 1-3" TORSION KEY SET in description

More Info

Waverspeed Universal Weld On Parallel 4 Link Suspension Kit 5 Bars Classic Car Rat Rod Mounts

Search only Waverspeed brand name
Waverspeed Universal Weld On Parallel 4 Link Suspension Kit 5 Bars Classic Car Rat Rod Mounts

Current price: 180 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 3.5 inch front and 2 inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed - rear lift height will vary depending on factory block size being replaced.
  • CONTENTS: (2x) Aluminum Front Top Strut Spacers, (2x) Delrin Front Bottom Strut Spacers, (2x) Steel Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • COMPATIBLE WITH 2007 - 2020 Silverado 1500 6-Lug (2WD 4WD) and 2007 - 2020 Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools.
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack.
  • FITMENT: 1994 - 2018 Dodge Ram 1500 (2WD). NOT compatible with Extended Cab, Mega Cab Models or 2013+ Ram 1500 models equipped with Active-Level Four-Corner Air Suspension.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. *An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 2.5 inch front and 1.5 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
  • CONTENTS: (2x) T6 Billet Aluminum Front Lift Strut Spacers, (2x) High Strength Steel Rear Lift Blocks, (4x) Zinc Phosphate Coated Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 2004 - 2020 Ford F-150 (4WD*). *Does NOT Fit FX4 and 2004 Heritage Models. NOTE: 4WD models come with a 1.5" factory block installed, which will be replaced by our 3" lift block resulting in a 1.5" additional rear lift.
  • BENEFITS: Improves the look of your truck and increases ground clearance, so you can fit larger tires. TWICE as strong as factory keys and indexed for lift. Adjustable lift height lifts according to your preference.
  • INSTALLATION: Easy installation takes 1 - 2 hours. A torsion bar puller (can be rented at most chain auto stores), or 5 ton gear puller is required for install.
  • TECHNICAL NOTES: 1 - 3 inch front suspension lift. An alignment is always recommended after altering the height of your vehicle.
  • CONTENTS: 2x High-Strength Steel Front Lift MAX-Torsion Keys, Installation Instructions and Pro Pack.
  • COMPATIBLE WITH 2004 - 2012 Chevrolet Colorado and GMC Canyon (2WD* / 4WD). *Will only fit 2WD Z71 model with Torsion Bar Suspension System.
  • ★ Brand Guarantee: 2 years warranty and feel free contact us with any problem, reply in 24 hours
  • ★ Contents: 2 torsion keys and 2 struts with Pro Shock-Proof box(Instruction included)
  • ★ Premium Material: Hard forged steel, excellent resistance to corrosion by powder coated surface and cold forged. Good looking on your truck and provide enough ground balance
  • ★ Easy Installation: installed in 1-2 hours and no special tools needed, true 1-3" lift standard
  • ★ Fits Chart: Chevy GMC Silverado Sierra 1500HD 2500HD 3500HD 2001-2010 with 8 Lugs Only, more fitment details about this 1-3" TORSION KEY SET in description
  • Note: No instruction included and professional installation recommended
  • Placement: Rear, Left, Right
  • 4 Link Bar Dimensions: 1.25" Outside Diameter & .125" Thick Wall
  • Package Includes: 5x Steel Bars (24"), 4x Weld-On Axle Mounts, 4x Weld-On Fame Mounts, 4x Panhard brackets,10x Hex Head Bolts with Nuts, Heim joints
  • Universal Rear Weld-On Parallel 4 Link Suspension Kit with 24" bars

More Info

Supreme Suspensions - Front Leveling Kit for Toyota Tundra 2" Front Aircraft Billet Aluminum Strut Spacers 2WD 4WD (Black)

Search only Supreme Suspensions brand name
Supreme Suspensions - Front Leveling Kit for Toyota Tundra 2

Current price: 84.95 USD


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 3.5 inch front and 2 inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed - rear lift height will vary depending on factory block size being replaced.
  • CONTENTS: (2x) Aluminum Front Top Strut Spacers, (2x) Delrin Front Bottom Strut Spacers, (2x) Steel Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • COMPATIBLE WITH 2007 - 2020 Silverado 1500 6-Lug (2WD 4WD) and 2007 - 2020 Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools.
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack.
  • FITMENT: 1994 - 2018 Dodge Ram 1500 (2WD). NOT compatible with Extended Cab, Mega Cab Models or 2013+ Ram 1500 models equipped with Active-Level Four-Corner Air Suspension.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. *An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 2.5 inch front and 1.5 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
  • CONTENTS: (2x) T6 Billet Aluminum Front Lift Strut Spacers, (2x) High Strength Steel Rear Lift Blocks, (4x) Zinc Phosphate Coated Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 2004 - 2020 Ford F-150 (4WD*). *Does NOT Fit FX4 and 2004 Heritage Models. NOTE: 4WD models come with a 1.5" factory block installed, which will be replaced by our 3" lift block resulting in a 1.5" additional rear lift.
  • BENEFITS: Improves the look of your truck and increases ground clearance, so you can fit larger tires. TWICE as strong as factory keys and indexed for lift. Adjustable lift height lifts according to your preference.
  • INSTALLATION: Easy installation takes 1 - 2 hours. A torsion bar puller (can be rented at most chain auto stores), or 5 ton gear puller is required for install.
  • TECHNICAL NOTES: 1 - 3 inch front suspension lift. An alignment is always recommended after altering the height of your vehicle.
  • CONTENTS: 2x High-Strength Steel Front Lift MAX-Torsion Keys, Installation Instructions and Pro Pack.
  • COMPATIBLE WITH 2004 - 2012 Chevrolet Colorado and GMC Canyon (2WD* / 4WD). *Will only fit 2WD Z71 model with Torsion Bar Suspension System.
  • ★ Brand Guarantee: 2 years warranty and feel free contact us with any problem, reply in 24 hours
  • ★ Contents: 2 torsion keys and 2 struts with Pro Shock-Proof box(Instruction included)
  • ★ Premium Material: Hard forged steel, excellent resistance to corrosion by powder coated surface and cold forged. Good looking on your truck and provide enough ground balance
  • ★ Easy Installation: installed in 1-2 hours and no special tools needed, true 1-3" lift standard
  • ★ Fits Chart: Chevy GMC Silverado Sierra 1500HD 2500HD 3500HD 2001-2010 with 8 Lugs Only, more fitment details about this 1-3" TORSION KEY SET in description
  • Note: No instruction included and professional installation recommended
  • Placement: Rear, Left, Right
  • 4 Link Bar Dimensions: 1.25" Outside Diameter & .125" Thick Wall
  • Package Includes: 5x Steel Bars (24"), 4x Weld-On Axle Mounts, 4x Weld-On Fame Mounts, 4x Panhard brackets,10x Hex Head Bolts with Nuts, Heim joints
  • Universal Rear Weld-On Parallel 4 Link Suspension Kit with 24" bars
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
  • TECHNICAL NOTES: 2 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999 - 2006 Toyota Tundra (2WD 4WD)

More Info

Supreme Suspensions - Front Leveling Kit for 1994-2018 Dodge Ram 1500 2.5" High-Strength Steel Spring Spacers Lift Kit (Tig Welded) 2WD 4x2 Pro

Search only Supreme Suspensions brand name
Supreme Suspensions - Front Leveling Kit for 1994-2018 Dodge Ram 1500 2.5

Current price: 67.95 USD

Saving: $5.00 (7%)


Check price and availability


  • Superlift 40009 Front Leveling Kit; 2 in.; For Models w/Front Coil Suspension;
  • PRODUCTS INCLUDE: 3"front lift spacers x2,2"rear lift spacers x2,Stainless steel bolt x6,Nut x6. Be free to contact us if you have any questions about anything.Thank you.
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level.
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2", the height of the car front lift is 3", the thickness of the rear lift block is 3", but the height of the car rear lift is 2".Because the lifting height and kit thickness are not 1:1.
  • HIGH QUALITY: It is made of the same material as the aircraft,which is strong and light, and has stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable.
  • WARM TIP: This set will raise the front of the truck by 3" and the rear of the truck by 2". Suitable for 2009-2019 Dodge Ram 1500 4WD.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 3 to 6 hours without the need for special tools. An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 3.5 inch front and 2 inch rear suspension lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio; it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved. *Also, Z71 and LTZ models have factory rear blocks installed - rear lift height will vary depending on factory block size being replaced.
  • CONTENTS: (2x) Aluminum Front Top Strut Spacers, (2x) Delrin Front Bottom Strut Spacers, (2x) Steel Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack
  • COMPATIBLE WITH 2007 - 2020 Silverado 1500 6-Lug (2WD 4WD) and 2007 - 2020 Sierra 1500 6-Lug (2WD 4WD). *Does NOT Fit 2007 Classic Models or 2019+ Chevy TrailBoss or AT4 models. Not compatible with models equipped with ARC (Adaptive Ride Control) / MagneRide / Auto-Ride / Air-Bag / Auto-Leveling Suspension Systems or 2015+ vehicles equipped with factory stamped steel upper control arms.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools.
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack.
  • FITMENT: 1994 - 2018 Dodge Ram 1500 (2WD). NOT compatible with Extended Cab, Mega Cab Models or 2013+ Ram 1500 models equipped with Active-Level Four-Corner Air Suspension.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. *An alignment is always recommended if you are altering the height of your vehicle.
  • TECHNICAL NOTES: 2.5 inch front and 1.5 inch rear suspension lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers.
  • CONTENTS: (2x) T6 Billet Aluminum Front Lift Strut Spacers, (2x) High Strength Steel Rear Lift Blocks, (4x) Zinc Phosphate Coated Square Bend U-Bolts, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 2004 - 2020 Ford F-150 (4WD*). *Does NOT Fit FX4 and 2004 Heritage Models. NOTE: 4WD models come with a 1.5" factory block installed, which will be replaced by our 3" lift block resulting in a 1.5" additional rear lift.
  • BENEFITS: Improves the look of your truck and increases ground clearance, so you can fit larger tires. TWICE as strong as factory keys and indexed for lift. Adjustable lift height lifts according to your preference.
  • INSTALLATION: Easy installation takes 1 - 2 hours. A torsion bar puller (can be rented at most chain auto stores), or 5 ton gear puller is required for install.
  • TECHNICAL NOTES: 1 - 3 inch front suspension lift. An alignment is always recommended after altering the height of your vehicle.
  • CONTENTS: 2x High-Strength Steel Front Lift MAX-Torsion Keys, Installation Instructions and Pro Pack.
  • COMPATIBLE WITH 2004 - 2012 Chevrolet Colorado and GMC Canyon (2WD* / 4WD). *Will only fit 2WD Z71 model with Torsion Bar Suspension System.
  • ★ Brand Guarantee: 2 years warranty and feel free contact us with any problem, reply in 24 hours
  • ★ Contents: 2 torsion keys and 2 struts with Pro Shock-Proof box(Instruction included)
  • ★ Premium Material: Hard forged steel, excellent resistance to corrosion by powder coated surface and cold forged. Good looking on your truck and provide enough ground balance
  • ★ Easy Installation: installed in 1-2 hours and no special tools needed, true 1-3" lift standard
  • ★ Fits Chart: Chevy GMC Silverado Sierra 1500HD 2500HD 3500HD 2001-2010 with 8 Lugs Only, more fitment details about this 1-3" TORSION KEY SET in description
  • Note: No instruction included and professional installation recommended
  • Placement: Rear, Left, Right
  • 4 Link Bar Dimensions: 1.25" Outside Diameter & .125" Thick Wall
  • Package Includes: 5x Steel Bars (24"), 4x Weld-On Axle Mounts, 4x Weld-On Fame Mounts, 4x Panhard brackets,10x Hex Head Bolts with Nuts, Heim joints
  • Universal Rear Weld-On Parallel 4 Link Suspension Kit with 24" bars
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
  • TECHNICAL NOTES: 2 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • CONTENTS: (2x) Aircraft Billet Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • COMPATIBLE WITH 1999 - 2006 Toyota Tundra (2WD 4WD)
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires.
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install.
  • TECHNICAL NOTES: 2 inch front suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio.
  • CONTENTS: (2x) High-Strength Steel TIG Welded Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack.
  • FITMENT: 1994 - 2018 Dodge Ram 1500. Will Only work on 2WD Models with Independent Front Suspension (IFS). Not recommended for Ram 1500 Mega Cab or Extended Cab models.

More Info

1    2    3    4    5    6    7    8    9    10