Inexpensive Table Saws. Reviews June, 2020, page 5

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

More from Home & Kitchen
Search only Milescraft brand name
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

Current price: 13.01 USD

Saving: $2.98 (19%)


Check price and availability


Height: 2.85 Inches

Length: 8.9 Inches

Width: 10.5 Inches

Weight: 0.8 Pounds

Warranty: Limited

  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction

More Info

DEWALT DWE7491X 10 In. Table Saw with Scissor Stand

More from Home & Kitchen
Search only DEWALT brand name
DEWALT DWE7491X 10 In. Table Saw with Scissor Stand

Current price: 619 USD


Check price and availability


Height: 30.25 Inches

Length: 26.75 Inches

Width: 26.75 Inches

Weight: 87 Pounds

  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate

More Info

Powermatic PM-TJ Tenoning Jig

More from Home & Kitchen
Search only brand name
Powermatic PM-TJ Tenoning Jig

Current price: 0.99 USD


Check price and availability


  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate

More Info

Freud 10" x 32T Super Dado Sets (SD510)

More from Home & Kitchen
Search only Freud brand name
Freud 10

Current price: 249.87 USD


Check price and availability


Height: 4 Inches

Length: 16 Inches

Width: 18 Inches

Weight: 16.05 Pounds

  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate
  • All blades and chippers come with Freud’s anti-kickback design
  • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
  • Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Set includes 2 blades, 6 chippers, shim set and carrying case. Machine Use: Table Saw,Portable Table Saw,Radial Arm Saw
  • 10" Dado Set, 1" Arbor

More Info

DEWALT Table Saw Stand, Mobile/Rolling (DWE74911)

More from Home & Kitchen
Search only DEWALT brand name
DEWALT Table Saw Stand, Mobile/Rolling (DWE74911)

Current price: 159.99 USD


Check price and availability


Height: 8.63 Inches

Length: 29.88 Inches

Width: 29.5 Inches

Weight: 0.5 Pounds

Warranty: 1 year limited warranty

  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate
  • All blades and chippers come with Freud’s anti-kickback design
  • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
  • Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Set includes 2 blades, 6 chippers, shim set and carrying case. Machine Use: Table Saw,Portable Table Saw,Radial Arm Saw
  • 10" Dado Set, 1" Arbor
  • Designed for easy loading and unloading into and out of vehicle
  • Easy setup and break down with excellent stability
  • Durable steel construction

More Info

BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars

More from Home & Kitchen
Search only Bora brand name
BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars

Current price: 84.99 USD

Saving: $29.00 (25%)


Check price and availability


Weight: 30.2474223464 Pounds

Warranty: 1 YEAR

  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate
  • All blades and chippers come with Freud’s anti-kickback design
  • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
  • Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Set includes 2 blades, 6 chippers, shim set and carrying case. Machine Use: Table Saw,Portable Table Saw,Radial Arm Saw
  • 10" Dado Set, 1" Arbor
  • Designed for easy loading and unloading into and out of vehicle
  • Easy setup and break down with excellent stability
  • Durable steel construction
  • Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your purchase, let US know, and we'll make it right.
  • Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability.
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly – hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.
  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.

More Info

Freud D1050X Diablo 10" 50-tooth ATB Combo Saw Blade w/5/8" Arbor&PermaShield

More from Home & Kitchen
Search only Diablo by Freud brand name
Freud D1050X Diablo 10

Current price: 36.95 USD

Saving: $18.95 (34%)


Check price and availability


Height: 10 Inches

Length: 0.25 Inches

Width: 10 Inches

Weight: 0.3 Pounds

Warranty: Limited lifetime

  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate
  • All blades and chippers come with Freud’s anti-kickback design
  • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
  • Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Set includes 2 blades, 6 chippers, shim set and carrying case. Machine Use: Table Saw,Portable Table Saw,Radial Arm Saw
  • 10" Dado Set, 1" Arbor
  • Designed for easy loading and unloading into and out of vehicle
  • Easy setup and break down with excellent stability
  • Durable steel construction
  • Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your purchase, let US know, and we'll make it right.
  • Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability.
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly – hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.
  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • The product is manufactured in China
  • Easy to use
  • The product is 10x50T Diablo Blade

More Info

Milwaukee 2736-20 M18 Fuel ONE-Key 8-1/4 in. Table Saw, Tool Only - Battery, Charger NOT Included

More from Home & Kitchen
Search only Milwaukee brand name
Milwaukee 2736-20 M18 Fuel ONE-Key 8-1/4 in. Table Saw, Tool Only - Battery, Charger NOT Included

Current price: 529 USD


Check price and availability


  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate
  • All blades and chippers come with Freud’s anti-kickback design
  • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
  • Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Set includes 2 blades, 6 chippers, shim set and carrying case. Machine Use: Table Saw,Portable Table Saw,Radial Arm Saw
  • 10" Dado Set, 1" Arbor
  • Designed for easy loading and unloading into and out of vehicle
  • Easy setup and break down with excellent stability
  • Durable steel construction
  • Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your purchase, let US know, and we'll make it right.
  • Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability.
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly – hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.
  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • The product is manufactured in China
  • Easy to use
  • The product is 10x50T Diablo Blade
  • Battery and charger not included
  • Compatible with all M18 batteries. Higher capacity batteries will yield higher performance.
  • Tool free guard and riving knife changes. Single wrench blade change.
  • On board storage for guard, riving knife, push stick, fence and miter gauge.
  • 24-1/2 ft. Rip Capacity to rip 4x8 sheets of plywood or OSB. Maximum bevel of 47 degrees.

More Info

Milwaukee Electric Tools 2736-21HD Table Saw Tool

More from Home & Kitchen
Search only Milwaukee Electric Tools brand name
Milwaukee Electric Tools 2736-21HD Table Saw Tool

Current price: 627.98 USD


Check price and availability


Height: 24 Inches

Length: 15 Inches

Width: 27 Inches

Weight: 55 Pounds

Warranty: 5 yr warranty on material and workmanship

  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate
  • All blades and chippers come with Freud’s anti-kickback design
  • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
  • Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Set includes 2 blades, 6 chippers, shim set and carrying case. Machine Use: Table Saw,Portable Table Saw,Radial Arm Saw
  • 10" Dado Set, 1" Arbor
  • Designed for easy loading and unloading into and out of vehicle
  • Easy setup and break down with excellent stability
  • Durable steel construction
  • Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your purchase, let US know, and we'll make it right.
  • Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability.
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly – hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.
  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • The product is manufactured in China
  • Easy to use
  • The product is 10x50T Diablo Blade
  • Battery and charger not included
  • Compatible with all M18 batteries. Higher capacity batteries will yield higher performance.
  • Tool free guard and riving knife changes. Single wrench blade change.
  • On board storage for guard, riving knife, push stick, fence and miter gauge.
  • 24-1/2 ft. Rip Capacity to rip 4x8 sheets of plywood or OSB. Maximum bevel of 47 degrees.
  • 5 year warranty on material and workmanship
  • This product meets customer requirement
  • Product is manufactured in China

More Info

Fulton Power Grip V Style Push Stick with Foam Rubber Base and Extra Wide Body For Better Control 2 Pack

More from Home & Kitchen
Search only Fulton brand name
Fulton Power Grip V Style Push Stick with Foam Rubber Base and Extra Wide Body For Better Control 2 Pack

Current price: 11.5 USD


Check price and availability


  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences
  • Dual Slide Motion-side to side and forward action for quick and easy setup
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening
  • Split rail miter bar construction-provides maximum hold
  • Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences
  • Dual slide motion-side to side and forward action for quick and easy setup
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots
  • Pre-load tension Design maintains consistent pressure across face of the feather board
  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction
  • 2-1/2 in. Dust collection port easily connects to a vacuum for efficient dust extraction
  • Site-pro modular Guarding system allows for tool-free adjustments of Guarding components appropriate for each application
  • Two position flip-over rip fence allows for narrow rip cuts and material support
  • 32-1/2 In. Rip capacity easily cuts a variety of larger shelving and trim materials
  • Rack & pinion telescoping fence system make fence adjustments fast, smooth and accurate
  • All blades and chippers come with Freud’s anti-kickback design
  • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
  • Features Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
  • Set includes 2 blades, 6 chippers, shim set and carrying case. Machine Use: Table Saw,Portable Table Saw,Radial Arm Saw
  • 10" Dado Set, 1" Arbor
  • Designed for easy loading and unloading into and out of vehicle
  • Easy setup and break down with excellent stability
  • Durable steel construction
  • Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your purchase, let US know, and we'll make it right.
  • Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability.
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly – hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.
  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight, Imported
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • The product is manufactured in China
  • Easy to use
  • The product is 10x50T Diablo Blade
  • Battery and charger not included
  • Compatible with all M18 batteries. Higher capacity batteries will yield higher performance.
  • Tool free guard and riving knife changes. Single wrench blade change.
  • On board storage for guard, riving knife, push stick, fence and miter gauge.
  • 24-1/2 ft. Rip Capacity to rip 4x8 sheets of plywood or OSB. Maximum bevel of 47 degrees.
  • 5 year warranty on material and workmanship
  • This product meets customer requirement
  • Product is manufactured in China
  • The comfort grip handle on the Power Grip V-Style Push Sticks are wider and thicker than the actual push stick itself. The reason we made the handle larger is to make sure we gain even more control and leverage. We made the push stick a bright orange so you have the ability to see the push stick when in use. This ensures that you can see exactly where you are placing the push stick in relation to the blade, the cutter and your stock at all times.
  • The body width on the Power Grip V Style Push Stick is extra wide to help provide you with even more control than a standard push stick. These push sticks start at 9/16” wide and are tapered up to 3/4” at the base. While most standard v style push sticks are much thinner. The extra width not only helps provide more control, it also provides you with a more stable gripping surface.
  • The push stick has a 90 degree notch on the inside end of the foam pad with a relief circle cutout to accept the 90 degree corner of your stock. The base is offset under the handle creating a notch which helps makes sure that your stock won’t slip out the back when running your stock through the table saw blade or router bit. The overall length of the push stick is approximately 8-9/16”.
  • The non-slip foam rubber pad is approximately 3/16” thick and will grip to most any type of material like smooth sanded wood, rough wood or composite materials. The pad measures approximately 6-1/4” in length which provides you with enough gripping surface area to control the stock though your table saw and router table. The width of the foam is slightly skinnier than the push stick itself so that it will slide smoothly against your fence without hanging up on the foam rubber.
  • If you have ever milled a narrow piece of stock on your table saw or router tabletop then you know how dicey it can get. Trying to control your stock while your fingers are dangerously close to the blade or cutter is something to avoid altogether. The Power Grip V-Style Push Stick is the perfect solution to help keep your fingers out of harms way and control your workpiece at the same time. The push stick has a foam rubber base to offer even more control than standard V or L style push sticks.

More Info

1    2    3    4    5    6    7    8    9    10