Inexpensive Table Saws. Reviews July, 2020, page 5

Delta 36-5152T2 Contractor Table Saw with 52" Rip Capacity and Cast Extension Wings

Search only Delta brand name
Delta 36-5152T2 Contractor Table Saw with 52

Current price: 1395 USD


Check price and availability


Height: 29.8 Inches

Length: 42.5 Inches

Width: 30.32 Inches

Warranty: 5 Year Professional Warranty

  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods

More Info

Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Search only Fulton brand name
Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Current price: 25.99 USD


Check price and availability


Height: 1.5 Inches

Length: 24.4 Inches

Width: 3 Inches

  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.

More Info

Upgrade Version Table Saw Mini Precision Table Saws DIY Wood Working Lathe Polisher Drilling Machine for DIY Handmade Wooden Model Crafts, Printed Circuit Board Cutting

Search only Bachin brand name
Upgrade Version Table Saw Mini Precision Table Saws DIY Wood Working Lathe Polisher Drilling Machine for DIY Handmade Wooden Model Crafts, Printed Circuit Board Cutting

Current price: 109.99 USD


Check price and availability


Height: 5.1181 Inches

Length: 9.4488 Inches

Width: 7.874 Inches

  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • DIY multifunctional mini table saw.Compact size easy to carry, perfect for DIY model makers
  • Double mark, you can see the angle and length.Installed with anti-chip hole, fast dandruff.Equipped with 7 class power adapter enable you to adjust the rotating speed easily to meet different cutting speed
  • Equipped with the ruler and backer in the cutting desk, pecisely cutting will be easier and ensure safety as well
  • 110mm alloy saw blade with high concentricity and 29mm maximum cuting thichness ensure the cutting surface flat
  • 795 type motor maximum rotating speed up to 7000RPM provinding ultra strong cutting power but low noise, you can use it just at home

More Info

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

Search only Fulton brand name
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

Current price: 84.99 USD


Check price and availability


  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • DIY multifunctional mini table saw.Compact size easy to carry, perfect for DIY model makers
  • Double mark, you can see the angle and length.Installed with anti-chip hole, fast dandruff.Equipped with 7 class power adapter enable you to adjust the rotating speed easily to meet different cutting speed
  • Equipped with the ruler and backer in the cutting desk, pecisely cutting will be easier and ensure safety as well
  • 110mm alloy saw blade with high concentricity and 29mm maximum cuting thichness ensure the cutting surface flat
  • 795 type motor maximum rotating speed up to 7000RPM provinding ultra strong cutting power but low noise, you can use it just at home
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.

More Info

Proxxon 37070 Table Saw FET

Search only Proxxon brand name
Proxxon 37070 Table Saw FET

Current price: 319.17 USD

Saving: $59.83 (16%)


Check price and availability


Height: 4.53 Inches

Length: 13.19 Inches

Width: 17.32 Inches

Weight: 0.01 Pounds

  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • DIY multifunctional mini table saw.Compact size easy to carry, perfect for DIY model makers
  • Double mark, you can see the angle and length.Installed with anti-chip hole, fast dandruff.Equipped with 7 class power adapter enable you to adjust the rotating speed easily to meet different cutting speed
  • Equipped with the ruler and backer in the cutting desk, pecisely cutting will be easier and ensure safety as well
  • 110mm alloy saw blade with high concentricity and 29mm maximum cuting thichness ensure the cutting surface flat
  • 795 type motor maximum rotating speed up to 7000RPM provinding ultra strong cutting power but low noise, you can use it just at home
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • Extendable table extension with integrated auxiliary stop. Plane-milled table in die-cast aluminium with 2 continuous T-nuts for the angle stop.
  • Angle stop with stop rail of aluminum and adjustable limit stop for manufacturing parts of equal length and the same angle
  • Stable construction because load bearing parts and plane milled table are made of die cast aluminum
  • For cutting wood, non-ferrous metals, plastics, plexiglas, glass fibre reinforced sheets, foam and many other materials
  • For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters

More Info

DEWALT DWX726 Miter Saw Stand With Wheels, Yellow

Search only DEWALT brand name
DEWALT DWX726 Miter Saw Stand With Wheels, Yellow

Current price: 199 USD

Saving: $70.00 (26%)


Check price and availability


Height: 10 Inches

Length: 60 Inches

Width: 17 Inches

Weight: 25 Pounds

Warranty: 3 Year Limited Warranty

  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • DIY multifunctional mini table saw.Compact size easy to carry, perfect for DIY model makers
  • Double mark, you can see the angle and length.Installed with anti-chip hole, fast dandruff.Equipped with 7 class power adapter enable you to adjust the rotating speed easily to meet different cutting speed
  • Equipped with the ruler and backer in the cutting desk, pecisely cutting will be easier and ensure safety as well
  • 110mm alloy saw blade with high concentricity and 29mm maximum cuting thichness ensure the cutting surface flat
  • 795 type motor maximum rotating speed up to 7000RPM provinding ultra strong cutting power but low noise, you can use it just at home
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • Extendable table extension with integrated auxiliary stop. Plane-milled table in die-cast aluminium with 2 continuous T-nuts for the angle stop.
  • Angle stop with stop rail of aluminum and adjustable limit stop for manufacturing parts of equal length and the same angle
  • Stable construction because load bearing parts and plane milled table are made of die cast aluminum
  • For cutting wood, non-ferrous metals, plastics, plexiglas, glass fibre reinforced sheets, foam and many other materials
  • For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters
  • Durable tubular steel construction allows for a 300-Pound maximum weight capacity
  • Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
  • Wide rubber grip wheels provide easy jobsite mobility
  • Easily adjustable mounting rails adapt to nearly any miter saw
  • Wide adjustable infeed and outfeed work supports provide up to 8' of material support
  • Dimensions: Extended Tool - 32.5" H x 98" W | Folded Tool - 17" H x 59.5" W | Weight: 67 lb

More Info

GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table, Jointer, and Band Saw by MICROJIG

Search only MICROJIG brand name
GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table, Jointer, and Band Saw by MICROJIG

Current price: 79 USD


Check price and availability


Height: 4.65 Inches

Length: 8 Inches

Width: 5.5 Inches

Weight: 2.4 Pounds

Warranty: Extended 3-Year Warranty from Authorized Resellers

  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • DIY multifunctional mini table saw.Compact size easy to carry, perfect for DIY model makers
  • Double mark, you can see the angle and length.Installed with anti-chip hole, fast dandruff.Equipped with 7 class power adapter enable you to adjust the rotating speed easily to meet different cutting speed
  • Equipped with the ruler and backer in the cutting desk, pecisely cutting will be easier and ensure safety as well
  • 110mm alloy saw blade with high concentricity and 29mm maximum cuting thichness ensure the cutting surface flat
  • 795 type motor maximum rotating speed up to 7000RPM provinding ultra strong cutting power but low noise, you can use it just at home
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • Extendable table extension with integrated auxiliary stop. Plane-milled table in die-cast aluminium with 2 continuous T-nuts for the angle stop.
  • Angle stop with stop rail of aluminum and adjustable limit stop for manufacturing parts of equal length and the same angle
  • Stable construction because load bearing parts and plane milled table are made of die cast aluminum
  • For cutting wood, non-ferrous metals, plastics, plexiglas, glass fibre reinforced sheets, foam and many other materials
  • For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters
  • Durable tubular steel construction allows for a 300-Pound maximum weight capacity
  • Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
  • Wide rubber grip wheels provide easy jobsite mobility
  • Easily adjustable mounting rails adapt to nearly any miter saw
  • Wide adjustable infeed and outfeed work supports provide up to 8' of material support
  • Dimensions: Extended Tool - 32.5" H x 98" W | Folded Tool - 17" H x 59.5" W | Weight: 67 lb
  • Made in the USA. A true MICROJIG Innovation.:
  • Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more
  • Precise 1/4" thin rips
  • Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch
  • GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback

More Info

10" Micro-Kerf40 1/16"Kerf Table Saw & Mitre Saw Blade with 5/8" Arbor

Search only Micro-kerf brand name
10

Current price: 199.99 USD


Check price and availability


Height: 10 Inches

Length: 10 Inches

Width: 0.06 Inches

  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • DIY multifunctional mini table saw.Compact size easy to carry, perfect for DIY model makers
  • Double mark, you can see the angle and length.Installed with anti-chip hole, fast dandruff.Equipped with 7 class power adapter enable you to adjust the rotating speed easily to meet different cutting speed
  • Equipped with the ruler and backer in the cutting desk, pecisely cutting will be easier and ensure safety as well
  • 110mm alloy saw blade with high concentricity and 29mm maximum cuting thichness ensure the cutting surface flat
  • 795 type motor maximum rotating speed up to 7000RPM provinding ultra strong cutting power but low noise, you can use it just at home
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • Extendable table extension with integrated auxiliary stop. Plane-milled table in die-cast aluminium with 2 continuous T-nuts for the angle stop.
  • Angle stop with stop rail of aluminum and adjustable limit stop for manufacturing parts of equal length and the same angle
  • Stable construction because load bearing parts and plane milled table are made of die cast aluminum
  • For cutting wood, non-ferrous metals, plastics, plexiglas, glass fibre reinforced sheets, foam and many other materials
  • For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters
  • Durable tubular steel construction allows for a 300-Pound maximum weight capacity
  • Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
  • Wide rubber grip wheels provide easy jobsite mobility
  • Easily adjustable mounting rails adapt to nearly any miter saw
  • Wide adjustable infeed and outfeed work supports provide up to 8' of material support
  • Dimensions: Extended Tool - 32.5" H x 98" W | Folded Tool - 17" H x 59.5" W | Weight: 67 lb
  • Made in the USA. A true MICROJIG Innovation.:
  • Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more
  • Precise 1/4" thin rips
  • Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch
  • GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback
  • Free instructional DVD and applications support
  • Made environmentally friendly in the USA
  • Minimal dust, noise and power consumption
  • Thin as a dime - .060" kerf
  • 1/16" kerf 10" diameter all purpose carbide tipped circular saw blade

More Info

Table Saw Switch Replacement Compatible with Ryobi and Craftsman, Safety Power Tool Switch,Paddle On/Off Switch for Table Saw 120V/250V

Search only wadoy brand name
Table Saw Switch Replacement Compatible with Ryobi and Craftsman, Safety Power Tool Switch,Paddle On/Off Switch for Table Saw 120V/250V

Current price: 9.49 USD


Check price and availability


  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • DIY multifunctional mini table saw.Compact size easy to carry, perfect for DIY model makers
  • Double mark, you can see the angle and length.Installed with anti-chip hole, fast dandruff.Equipped with 7 class power adapter enable you to adjust the rotating speed easily to meet different cutting speed
  • Equipped with the ruler and backer in the cutting desk, pecisely cutting will be easier and ensure safety as well
  • 110mm alloy saw blade with high concentricity and 29mm maximum cuting thichness ensure the cutting surface flat
  • 795 type motor maximum rotating speed up to 7000RPM provinding ultra strong cutting power but low noise, you can use it just at home
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • Extendable table extension with integrated auxiliary stop. Plane-milled table in die-cast aluminium with 2 continuous T-nuts for the angle stop.
  • Angle stop with stop rail of aluminum and adjustable limit stop for manufacturing parts of equal length and the same angle
  • Stable construction because load bearing parts and plane milled table are made of die cast aluminum
  • For cutting wood, non-ferrous metals, plastics, plexiglas, glass fibre reinforced sheets, foam and many other materials
  • For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters
  • Durable tubular steel construction allows for a 300-Pound maximum weight capacity
  • Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
  • Wide rubber grip wheels provide easy jobsite mobility
  • Easily adjustable mounting rails adapt to nearly any miter saw
  • Wide adjustable infeed and outfeed work supports provide up to 8' of material support
  • Dimensions: Extended Tool - 32.5" H x 98" W | Folded Tool - 17" H x 59.5" W | Weight: 67 lb
  • Made in the USA. A true MICROJIG Innovation.:
  • Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more
  • Precise 1/4" thin rips
  • Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch
  • GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback
  • Free instructional DVD and applications support
  • Made environmentally friendly in the USA
  • Minimal dust, noise and power consumption
  • Thin as a dime - .060" kerf
  • 1/16" kerf 10" diameter all purpose carbide tipped circular saw blade
  • ✅ 【MONEY-BACK GUARANTEE】: for any reason you're not completely satisfied,can ask for a replacement or full refund.
  • ✅ 【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.
  • ✅ 【 FUNCTION】:Removalbe safety key to lock the switch prevents from accidental operations.Large paddle for emergency stop.
  • ✅ 【VOLTAGE】: Emergency stop switch rated current: 20 Amps at 125V, 12 Amps at 250V.
  • ✅ 【 TABLE SAW SWITCH】: The Paddle Switch for Table Saw,compatible with most Craftsman and Ryobi Table Saws. Note,it's not created or sold by Craftsman/Ryobi.

More Info

Keter Jobmade Portable Work Bench and Miter Saw Table for Woodworking Tools and Accessories with Included Wood Clamps – Removable Table Legs for Easy Garage Storage

Search only Keter brand name
Keter Jobmade Portable Work Bench and Miter Saw Table for Woodworking Tools and Accessories with Included Wood Clamps – Removable Table Legs for Easy Garage Storage

Current price: 59.75 USD

Saving: $20.24 (25%)


Check price and availability


Height: 4.41 Inches

Length: 34.65 Inches

Width: 21.81 Inches

  • Heavy duty one piece rail system for precision cuts every time
  • Cast iron table top with 2 cast iron extension wings
  • Smooth and dependable adjustable belt drive table saw
  • 52 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
  • Powerful 15 amp Contractor Grade motor easily handles hardwoods
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • DIY multifunctional mini table saw.Compact size easy to carry, perfect for DIY model makers
  • Double mark, you can see the angle and length.Installed with anti-chip hole, fast dandruff.Equipped with 7 class power adapter enable you to adjust the rotating speed easily to meet different cutting speed
  • Equipped with the ruler and backer in the cutting desk, pecisely cutting will be easier and ensure safety as well
  • 110mm alloy saw blade with high concentricity and 29mm maximum cuting thichness ensure the cutting surface flat
  • 795 type motor maximum rotating speed up to 7000RPM provinding ultra strong cutting power but low noise, you can use it just at home
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • Extendable table extension with integrated auxiliary stop. Plane-milled table in die-cast aluminium with 2 continuous T-nuts for the angle stop.
  • Angle stop with stop rail of aluminum and adjustable limit stop for manufacturing parts of equal length and the same angle
  • Stable construction because load bearing parts and plane milled table are made of die cast aluminum
  • For cutting wood, non-ferrous metals, plastics, plexiglas, glass fibre reinforced sheets, foam and many other materials
  • For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters
  • Durable tubular steel construction allows for a 300-Pound maximum weight capacity
  • Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
  • Wide rubber grip wheels provide easy jobsite mobility
  • Easily adjustable mounting rails adapt to nearly any miter saw
  • Wide adjustable infeed and outfeed work supports provide up to 8' of material support
  • Dimensions: Extended Tool - 32.5" H x 98" W | Folded Tool - 17" H x 59.5" W | Weight: 67 lb
  • Made in the USA. A true MICROJIG Innovation.:
  • Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more
  • Precise 1/4" thin rips
  • Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch
  • GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback
  • Free instructional DVD and applications support
  • Made environmentally friendly in the USA
  • Minimal dust, noise and power consumption
  • Thin as a dime - .060" kerf
  • 1/16" kerf 10" diameter all purpose carbide tipped circular saw blade
  • ✅ 【MONEY-BACK GUARANTEE】: for any reason you're not completely satisfied,can ask for a replacement or full refund.
  • ✅ 【 PREMIUM QUALITY】: This safety locking switch is made of high quality durable plastic.They are approved by UL, TUV, CSA, CE, ETL standards and they fit most of the power tools on the market.
  • ✅ 【 FUNCTION】:Removalbe safety key to lock the switch prevents from accidental operations.Large paddle for emergency stop.
  • ✅ 【VOLTAGE】: Emergency stop switch rated current: 20 Amps at 125V, 12 Amps at 250V.
  • ✅ 【 TABLE SAW SWITCH】: The Paddle Switch for Table Saw,compatible with most Craftsman and Ryobi Table Saws. Note,it's not created or sold by Craftsman/Ryobi.
  • VERSATILE USE: Perfect for any kind of project – DIY projects, home improvement, commercial construction work, painting, table saw use, and more
  • DISCREET STORAGE BIN: It has a built-in storage compartment to keep all your tools on hand when you need them and neatly organized in one place
  • ACCESSORIES INCLUDED: Includes four holding clamps to secure a variety of working materials as well as a removable tool organizer that clips into the table to always have on hand
  • EASY STORAGE: Collapses down to 4.4 inches thick for easy storage in a pinch
  • LESS THAN 30 LBS: With its lightweight design and sturdy carrying handle, take your workbench just about anywhere
  • LESS THAN 30 SECOND SETUP: Simply remove the legs from their designated storage space and pop them into the tabletop
  • DURABLE AND STRONG: Weather-resistant polypropylene construction prevents rusting, peeling, and denting
  • RESIN CONSTRUCTION: Made of heavy-duty resin with aluminum legs and a work space capacity of 1000 lbs.
  • DIMENSIONS: Folded: 34. 65 in L x 21. 81 in. W x 4. 41 in. H / Standing: 38. 19 in. L x 25. 39 in. W x 31. 89 in. H

More Info

1    2    3    4    5    6    7    8    9    10