Best Tap Extractors. Reviews August, 2020

Walton Tools 18001 Tap Extractor Set

Search only Walton Tools brand name
Walton Tools 18001 Tap Extractor Set

Current price: 97.99 USD


Check price and availability


Height: 1.8 Inches

Length: 6.4 Inches

Width: 4.7 Inches

Weight: 0.85 Pounds

Warranty: Lifetime warranty does not cover abuse

  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.

More Info

Walton 18001-3 6 Piece 3 Flute Tap Extractor Set With Square Shank

Search only Walton brand name
Walton 18001-3 6 Piece 3 Flute Tap Extractor Set With Square Shank

Current price: 82.5 USD


Check price and availability


  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps

More Info

HSS Broken Tap Extractor Removal Tool Set M4 M5 M6 M8 M10 M12 M14 M16 M18 M20

Search only BOKYWOX brand name
HSS Broken Tap Extractor Removal Tool Set M4 M5 M6 M8 M10 M12 M14 M16 M18 M20

Current price: 38.99 USD

Saving: $14.00 (26%)


Check price and availability


  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps
  • Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
  • Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
  • Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
  • Material:HSS 6542

More Info

Walton 18002 6 Piece 4 Flute Tap Extractor Set With Square Shank

Search only Walton brand name
Walton 18002 6 Piece 4 Flute Tap Extractor Set With Square Shank

Current price: 101.7 USD


Check price and availability


  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps
  • Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
  • Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
  • Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
  • Material:HSS 6542
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
  • For removing Machine Screws and Broken Hand Taps

More Info

IRWIN Screw Extractor for Spiral Screws, 5-Piece (53535)

Search only IRWIN brand name
IRWIN Screw Extractor for Spiral Screws, 5-Piece (53535)

Current price: 11 USD


Check price and availability


Height: 5.79921259251 Inches

Length: 0.49999999949 Inches

Width: 4.9999999949 Inches

Weight: 0.15 Pounds

  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps
  • Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
  • Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
  • Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
  • Material:HSS 6542
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
  • For removing Machine Screws and Broken Hand Taps
  • Extractor size and recommended drill bit size are etched on each tool
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
  • Aggressive left hand spiral design for extra gripping power
  • Designed to remove broken studs, bolts, socket screws and fittings

More Info

Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank

Search only Walton brand name
Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank

Current price: 213.85 USD


Check price and availability


  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps
  • Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
  • Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
  • Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
  • Material:HSS 6542
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
  • For removing Machine Screws and Broken Hand Taps
  • Extractor size and recommended drill bit size are etched on each tool
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
  • Aggressive left hand spiral design for extra gripping power
  • Designed to remove broken studs, bolts, socket screws and fittings
  • Packed in 15-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 13 piece set contains sizes #4 (3-flute), #5 (3-flute), #6 (3-flute), #8, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"
  • For removing Machine Screws and Broken Hand Taps

More Info

Ontel SpeedOut Damaged Screw Extractor & Bolt Extractor Set

Search only Ontel brand name
Ontel SpeedOut Damaged Screw Extractor & Bolt Extractor Set

Current price: 9.51 USD

Saving: $10.48 (52%)


Check price and availability


Height: 2.4 Inches

Length: 3.5 Inches

Width: 0.6 Inches

Weight: 0.1875 Pounds

Warranty: 1

  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps
  • Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
  • Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
  • Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
  • Material:HSS 6542
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
  • For removing Machine Screws and Broken Hand Taps
  • Extractor size and recommended drill bit size are etched on each tool
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
  • Aggressive left hand spiral design for extra gripping power
  • Designed to remove broken studs, bolts, socket screws and fittings
  • Packed in 15-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 13 piece set contains sizes #4 (3-flute), #5 (3-flute), #6 (3-flute), #8, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"
  • For removing Machine Screws and Broken Hand Taps
  • Product is manufactured in United States
  • Select propellants that deliver consistent accuracy and performance
  • Made of good quality products

More Info

Topec 25Pcs Screw Extractor Set, Hex Head Multi-Spline Easy Out Bolt Extractor Set, Premium High Carbon Steel Rounded Bolt Remover

Search only Topec brand name
Topec 25Pcs Screw Extractor Set, Hex Head Multi-Spline Easy Out Bolt Extractor Set, Premium High Carbon Steel Rounded Bolt Remover

Current price: 39.99 USD


Check price and availability


Height: 1.9 Inches

Length: 8.8 Inches

Width: 6.3 Inches

  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps
  • Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
  • Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
  • Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
  • Material:HSS 6542
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
  • For removing Machine Screws and Broken Hand Taps
  • Extractor size and recommended drill bit size are etched on each tool
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
  • Aggressive left hand spiral design for extra gripping power
  • Designed to remove broken studs, bolts, socket screws and fittings
  • Packed in 15-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 13 piece set contains sizes #4 (3-flute), #5 (3-flute), #6 (3-flute), #8, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"
  • For removing Machine Screws and Broken Hand Taps
  • Product is manufactured in United States
  • Select propellants that deliver consistent accuracy and performance
  • Made of good quality products
  • PREMUIM SERVICE - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problems
  • MULTI-APPLICATION - The extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications
  • MULTIPLE SIZES -The easy out extractor set contains 25 different sizes, each with an eye-catching size mark, which quickly selects the right drill bit and meets almost all your needs
  • TIGHT GRIP - Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping
  • PREMIUM INDUSTRIAL GRADE MATERIAL - Made of heat-treated high-quality high-carbon steel (chromium-molybdenum steel),is the ideal tool for removing broken screws, bolts, studs, fittings, threaded pipes and pins

More Info

TEMO 1/4 Inch (6.3 mm) Solid Carbide Broken Taps Drill Extractor

Search only TEMO brand name
TEMO 1/4 Inch (6.3 mm) Solid Carbide Broken Taps Drill Extractor

Current price: 19.49 USD


Check price and availability


Height: 0.5 Inches

Length: 3.75 Inches

Width: 0.5 Inches

Weight: 1 ounces

  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps
  • Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
  • Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
  • Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
  • Material:HSS 6542
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
  • For removing Machine Screws and Broken Hand Taps
  • Extractor size and recommended drill bit size are etched on each tool
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
  • Aggressive left hand spiral design for extra gripping power
  • Designed to remove broken studs, bolts, socket screws and fittings
  • Packed in 15-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 13 piece set contains sizes #4 (3-flute), #5 (3-flute), #6 (3-flute), #8, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"
  • For removing Machine Screws and Broken Hand Taps
  • Product is manufactured in United States
  • Select propellants that deliver consistent accuracy and performance
  • Made of good quality products
  • PREMUIM SERVICE - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problems
  • MULTI-APPLICATION - The extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications
  • MULTIPLE SIZES -The easy out extractor set contains 25 different sizes, each with an eye-catching size mark, which quickly selects the right drill bit and meets almost all your needs
  • TIGHT GRIP - Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping
  • PREMIUM INDUSTRIAL GRADE MATERIAL - Made of heat-treated high-quality high-carbon steel (chromium-molybdenum steel),is the ideal tool for removing broken screws, bolts, studs, fittings, threaded pipes and pins
  • Bright, uncoated surface.
  • Solid carbide drill bits allow for drilling hard and difficult material.
  • Spade point for drilling broken taps and bolts.
  • Straight flutes for easy control and clean and precise drilling.
  • Self-centering point penetrates material without the need of a pilot hole.

More Info

Walton 10254 1/4", 4 Flute Tap Extractor With Square Shank

Search only Walton brand name
Walton 10254 1/4

Current price: 17.54 USD

Saving: $1.72 (9%)


Check price and availability


Height: 0.7 Inches

Length: 3.4 Inches

Width: 0.7 Inches

Weight: 0.05 Pounds

  • replacement flutes available
  • 4 flute design
  • 3/16 inch-1/2 inch
  • The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
  • For removing Machine Screws and Broken Hand Taps
  • Caution: before use, please clean the debris on the extractor tap and put more lubricating oil. Then, twist gently and take out the broken wire bit by bit, this helps improve the removal rate.
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings.
  • Remove Damaged Screws Bolts And Water Pipes - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes.
  • Claw: 3 Claw (M4-M10) or 4 Claw(M12-M30)
  • Material:HSS 6542
  • Packed in 6-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 6 piece set contains sizes 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
  • For removing Machine Screws and Broken Hand Taps
  • Extractor size and recommended drill bit size are etched on each tool
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
  • Aggressive left hand spiral design for extra gripping power
  • Designed to remove broken studs, bolts, socket screws and fittings
  • Packed in 15-compartment plastic case
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • 13 piece set contains sizes #4 (3-flute), #5 (3-flute), #6 (3-flute), #8, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"
  • For removing Machine Screws and Broken Hand Taps
  • Product is manufactured in United States
  • Select propellants that deliver consistent accuracy and performance
  • Made of good quality products
  • PREMUIM SERVICE - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problems
  • MULTI-APPLICATION - The extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications
  • MULTIPLE SIZES -The easy out extractor set contains 25 different sizes, each with an eye-catching size mark, which quickly selects the right drill bit and meets almost all your needs
  • TIGHT GRIP - Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping
  • PREMIUM INDUSTRIAL GRADE MATERIAL - Made of heat-treated high-quality high-carbon steel (chromium-molybdenum steel),is the ideal tool for removing broken screws, bolts, studs, fittings, threaded pipes and pins
  • Bright, uncoated surface.
  • Solid carbide drill bits allow for drilling hard and difficult material.
  • Spade point for drilling broken taps and bolts.
  • Straight flutes for easy control and clean and precise drilling.
  • Self-centering point penetrates material without the need of a pilot hole.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure
  • For removing Machine Screws and Broken Hand Taps

More Info

1    2    3    4    5    6    7    8    9    10