Best Tapered End Mills. Reviews August, 2020

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8" Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

Search only SpeTool brand name
SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8

Current price: 23.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge

More Info

SpeTool Tapered Ball Nose End Mill 1/4 X 3 inches with 0.5mm Ball Nose 4.82 Deg for CNC Router Engraver Carving Bits

Search only SpeTool brand name
SpeTool Tapered Ball Nose End Mill 1/4 X 3 inches with 0.5mm Ball Nose 4.82 Deg for CNC Router Engraver Carving Bits

Current price: 15.99 USD


Check price and availability


Weight: 0.09 Pounds

  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.

More Info

40Pcs End Mill Bits Set 1/8" Shank, Mcwdoit CNC Router Bits Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits

Search only mcwdoit brand name
40Pcs End Mill Bits Set 1/8

Current price: 34.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.

More Info

SpeTool Tungsten Carbide Tapered End Mill 1/4" Shank 3" OVL with 1.0MM Tips for Woodworking CNC Router Carving Bits

Search only SpeTool brand name
SpeTool Tungsten Carbide Tapered End Mill 1/4

Current price: 15.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC router, handheld router, Engraving machine.Carving hardwood, acrylic, MDF, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.92Deg
  • The CNC bits with 1/4 inch Diameter shank, 2 Flutes, TiAIN Coated for wear resistant.
  • Tapered angle Ball Nose End Mill / CNC router carving bits

More Info

SpeTool 4pcs Ball Nose Tapered End Mill 1/4 inch Shank 2 Flutes Router Bit with 1.0mm Ball HRC55 Woodworking CNC 2D and 3D Carving Bits

Search only SpeTool brand name
SpeTool 4pcs Ball Nose Tapered End Mill 1/4 inch Shank 2 Flutes Router Bit with 1.0mm Ball HRC55 Woodworking CNC 2D and 3D Carving Bits

Current price: 49.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC router, handheld router, Engraving machine.Carving hardwood, acrylic, MDF, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.92Deg
  • The CNC bits with 1/4 inch Diameter shank, 2 Flutes, TiAIN Coated for wear resistant.
  • Tapered angle Ball Nose End Mill / CNC router carving bits
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for 3D, CNC,Engraving machine.XCarving Route Cut plywood, hardwood, acrylic, alloy steel,MDF,stainless steel,titanium alloy etc
  • Ball Radius: 1.0mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 3.8Deg
  • Universal 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated build-up heat resistant; high grade carbide keeps its edge with no edge chipping
  • 4Pcs Tapered angle Ball Nose End Mill / carving router bits

More Info

Spetool Tapered Ball Nose End Mill 1/4" Shank with 0.75mm Ball Nose 4.82 Deg for CNC Machine 3D Engraving Carving Bits

Search only SpeTool brand name
Spetool Tapered Ball Nose End Mill 1/4

Current price: 16.49 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC router, handheld router, Engraving machine.Carving hardwood, acrylic, MDF, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.92Deg
  • The CNC bits with 1/4 inch Diameter shank, 2 Flutes, TiAIN Coated for wear resistant.
  • Tapered angle Ball Nose End Mill / CNC router carving bits
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for 3D, CNC,Engraving machine.XCarving Route Cut plywood, hardwood, acrylic, alloy steel,MDF,stainless steel,titanium alloy etc
  • Ball Radius: 1.0mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 3.8Deg
  • Universal 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated build-up heat resistant; high grade carbide keeps its edge with no edge chipping
  • 4Pcs Tapered angle Ball Nose End Mill / carving router bits
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.2Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated

More Info

2PCS/Package JERRAY CNC Carving 2 Flutes Tapered Ball end Mills Angle 4.15° Tip Radius=0.5mm X 1/8" Shank Tungsten Solid Carbide HRC55 with TiAIN Coated

Search only JERRAY brand name
2PCS/Package JERRAY CNC Carving 2 Flutes Tapered Ball end Mills Angle 4.15° Tip Radius=0.5mm X 1/8

Current price: 13.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC router, handheld router, Engraving machine.Carving hardwood, acrylic, MDF, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.92Deg
  • The CNC bits with 1/4 inch Diameter shank, 2 Flutes, TiAIN Coated for wear resistant.
  • Tapered angle Ball Nose End Mill / CNC router carving bits
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for 3D, CNC,Engraving machine.XCarving Route Cut plywood, hardwood, acrylic, alloy steel,MDF,stainless steel,titanium alloy etc
  • Ball Radius: 1.0mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 3.8Deg
  • Universal 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated build-up heat resistant; high grade carbide keeps its edge with no edge chipping
  • 4Pcs Tapered angle Ball Nose End Mill / carving router bits
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.2Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • 2PCS / Package
  • Per side angle:B=4.15°
  • Flutes length:15mm / Overall lengh=38mm
  • Shank diameter:1/8"(3.175MM)
  • Brand name: JERRAY

More Info

1/16" Tip Dia. x 3/4" Flute Length - Solid Carbide Tapered End Mill - 11 Degree Per Side

Search only Meda - Superior Import brand name
1/16

Current price: 60.05 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC router, handheld router, Engraving machine.Carving hardwood, acrylic, MDF, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.92Deg
  • The CNC bits with 1/4 inch Diameter shank, 2 Flutes, TiAIN Coated for wear resistant.
  • Tapered angle Ball Nose End Mill / CNC router carving bits
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for 3D, CNC,Engraving machine.XCarving Route Cut plywood, hardwood, acrylic, alloy steel,MDF,stainless steel,titanium alloy etc
  • Ball Radius: 1.0mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 3.8Deg
  • Universal 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated build-up heat resistant; high grade carbide keeps its edge with no edge chipping
  • 4Pcs Tapered angle Ball Nose End Mill / carving router bits
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.2Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • 2PCS / Package
  • Per side angle:B=4.15°
  • Flutes length:15mm / Overall lengh=38mm
  • Shank diameter:1/8"(3.175MM)
  • Brand name: JERRAY
  • Overall Length: 3"
  • Shank Diameter: 3/8"
  • Solid Carbide

More Info

SpeTool Tungsten Carbide Tapered End Mill 1/4" Shank 3" OVL with 2.0MM Tips for Woodworking Carving CNC Bits

Search only SpeTool brand name
SpeTool Tungsten Carbide Tapered End Mill 1/4

Current price: 15.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC router, handheld router, Engraving machine.Carving hardwood, acrylic, MDF, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.92Deg
  • The CNC bits with 1/4 inch Diameter shank, 2 Flutes, TiAIN Coated for wear resistant.
  • Tapered angle Ball Nose End Mill / CNC router carving bits
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for 3D, CNC,Engraving machine.XCarving Route Cut plywood, hardwood, acrylic, alloy steel,MDF,stainless steel,titanium alloy etc
  • Ball Radius: 1.0mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 3.8Deg
  • Universal 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated build-up heat resistant; high grade carbide keeps its edge with no edge chipping
  • 4Pcs Tapered angle Ball Nose End Mill / carving router bits
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.2Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • 2PCS / Package
  • Per side angle:B=4.15°
  • Flutes length:15mm / Overall lengh=38mm
  • Shank diameter:1/8"(3.175MM)
  • Brand name: JERRAY
  • Overall Length: 3"
  • Shank Diameter: 3/8"
  • Solid Carbide
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC Table and handhold router,3D and 2D Caving and Engraving machine. Cut a variety of materials from wood, plywood, MDF and other wood composites, plastics, and solid surface etc.
  • Ball Raidus: 2.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 2.2Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters

More Info

SpeTool Tapered Ball Nose End Mill 1/4" Shank with1.5mm Ball Radio 4.82 Deg Router bits for CNC Machine 3D Engraving Carving

Search only SpeTool brand name
SpeTool Tapered Ball Nose End Mill 1/4

Current price: 16.99 USD


Check price and availability


  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance
  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC router engraver machine, hand router trimmer , 3D carving for Plywood, Dardwood, plastic, MDF, Carbon steel,inconel,stainless steel,etc
  • Ball Raidus: 0.5mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 4.82Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated to better wear resistance.
  • Tapered angle Ball Nose End Mill / Cone Cutters for smooth engraving and clear the edage.
  • 【Parameter】Overall Length(OAL): 38mm; Shank Diameter(SD): 3.175mm
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing. ONE YEAR WARRANTY covered.
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for CNC router, handheld router, Engraving machine.Carving hardwood, acrylic, MDF, Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc
  • Ball Raidus: 1.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 3.92Deg
  • The CNC bits with 1/4 inch Diameter shank, 2 Flutes, TiAIN Coated for wear resistant.
  • Tapered angle Ball Nose End Mill / CNC router carving bits
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • The bits for 3D, CNC,Engraving machine.XCarving Route Cut plywood, hardwood, acrylic, alloy steel,MDF,stainless steel,titanium alloy etc
  • Ball Radius: 1.0mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 3.8Deg
  • Universal 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated build-up heat resistant; high grade carbide keeps its edge with no edge chipping
  • 4Pcs Tapered angle Ball Nose End Mill / carving router bits
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 0.75mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.2Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated
  • 2PCS / Package
  • Per side angle:B=4.15°
  • Flutes length:15mm / Overall lengh=38mm
  • Shank diameter:1/8"(3.175MM)
  • Brand name: JERRAY
  • Overall Length: 3"
  • Shank Diameter: 3/8"
  • Solid Carbide
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time
  • For CNC Table and handhold router,3D and 2D Caving and Engraving machine. Cut a variety of materials from wood, plywood, MDF and other wood composites, plastics, and solid surface etc.
  • Ball Raidus: 2.0mm, Flute Length: 1-1/4", Overall Length: 3", Single Side Angel: 2.2Deg
  • 1/4 inch Shank Diameter, 2 Flutes, TiAIN Coated
  • Tapered angle Ball Nose End Mill / Cone Cutters
  • High quality tungsten carbide and coat. Long service life and less wear.
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine.
  • Ball Raidus: 1.5mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 2.8Deg
  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated

More Info

1    2    3    4    5    6    7    8    9    10