Best Tapered Locking Bushings. Martin brand. New releases 2021

Martin R1 2-3/16 Split Tapered Bushing - Sealed in Package

More from Industrial & Scientific
Search only Martin brand name
Martin R1 2-3/16 Split Tapered Bushing - Sealed in Package

Current price: 18.39 USD


Check price and availability


Height: 9.055118101 Inches

Length: 12.204724397 Inches

Width: 9.055118101 Inches

Weight: 48.50169764 Pounds

  • This item is new, including original packaging!

More Info

Martin Q1 2 1/2 MST Bushing, Ductile Iron, Inch, 2.5" Bore, 2.875" OD, 2.5" Length

More from Industrial & Scientific
Search only Martin brand name
Martin Q1 2 1/2 MST Bushing, Ductile Iron, Inch, 2.5

Current price: 44.7 USD

Saving: $12.70 (22%)


Check price and availability


  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft

More Info

Martin H 1 MST Bushing, Sintered Steel, Inch, 1" Bore, 1.625" OD, 1.25" Length

More from Industrial & Scientific
Search only Martin brand name
Martin H 1 MST Bushing, Sintered Steel, Inch, 1

Current price: 14.58 USD


Check price and availability


Weight: 0.6 Pounds

  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft

More Info

Martin 2012 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25" Bore, 2.75" OD, 1.25" Length

More from Industrial & Scientific
Search only Martin brand name
Martin 2012 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25

Current price: 14.64 USD


Check price and availability


Height: 5.905511805 Inches

Length: 5.905511805 Inches

Width: 5.905511805 Inches

Weight: 1.3 Pounds

  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft

More Info

Martin H 1 1/8 MST Bushing, Sintered Steel, Inch, 1.13" Bore, 1.625" OD, 1.25" Length

More from Industrial & Scientific
Search only Martin brand name
Martin H 1 1/8 MST Bushing, Sintered Steel, Inch, 1.13

Current price: 11.1 USD


Check price and availability


  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft

More Info

Martin 2012 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 2.75" OD, 1.25" Length

More from Industrial & Scientific
Search only Martin brand name
Martin 2012 1 Taper Bushing, Sintered Steel, Inch, 1

Current price: 15.22 USD

Saving: $21.10 (58%)


Check price and availability


Height: 5.905511805 Inches

Length: 5.905511805 Inches

Width: 5.905511805 Inches

Weight: 1.44 Pounds

  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft

More Info

Martin 2012 1 3/4 Taper Bushing, Sintered Steel, Inch, 1.75" Bore, 2.75" OD, 1.25" Length

More from Industrial & Scientific
Search only Martin brand name
Martin 2012 1 3/4 Taper Bushing, Sintered Steel, Inch, 1.75

Current price: 30.33 USD

Saving: $5.99 (16%)


Check price and availability


Height: 5.905511805 Inches

Length: 5.905511805 Inches

Width: 5.905511805 Inches

  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft

More Info

Martin 1008 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 1.386" OD, 0.875" Length

More from Industrial & Scientific
Search only Martin brand name
Martin 1008 1 Taper Bushing, Sintered Steel, Inch, 1

Current price: 14.5 USD


Check price and availability


Height: 2 Inches

Length: 8 Inches

Width: 6 Inches

  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft

More Info

Martin Q1-BB 1 MST Idler Bushing, Ductile Iron, Inch, 1" Bore, 4.12" OD, 2.5" Length

More from Industrial & Scientific
Search only Martin brand name
Martin Q1-BB 1 MST Idler Bushing, Ductile Iron, Inch, 1

Current price: 227 USD

Saving: $117.00 (34%)


Check price and availability


Weight: 4 Pounds

  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Drive components removable without dismounting the bushing
  • Works with sheaves and other drive components that fit split taper bushings
  • Two permanently lubricated ball bearings require no maintenance
  • High carbon steel for greater strength and shock resistance than cast iron
  • Idler bushing for tensioning belt drives

More Info

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2" Bore, 4.25" OD, 2" Length

More from Industrial & Scientific
Search only Martin brand name
Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2

Current price: 28.16 USD

Saving: $39.03 (58%)


Check price and availability


Height: 7 Inches

Length: 7 Inches

Width: 6 Inches

  • This item is new, including original packaging!
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with split taper bushings from various manufacturers
  • Keyed to both shaft and drive component to provide higher torque carrying capacity
  • Sintered steel for greater strength and resistance to wear than steel
  • Solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft
  • Split taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Drive components removable without dismounting the bushing
  • Works with sheaves and other drive components that fit split taper bushings
  • Two permanently lubricated ball bearings require no maintenance
  • High carbon steel for greater strength and shock resistance than cast iron
  • Idler bushing for tensioning belt drives
  • Interchangeable with taper bushings from various manufacturers
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Sintered steel for greater strength and resistance to wear than steel
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft

More Info

1    2    3    4    5    6    7    8    9    10