High rated Tapered Locking Bushings. Reviews January, 2021, page 1
TB Woods 1008 TL100819MM Taper Lock Bushing, Cast Iron, 19 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
More from Industrial & ScientificSearch only TB Woods brand name
Current price: 15.25 USD
Weight: 0.2 Pounds
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
Phoenix Mfg. Split Tapered Bushing, 5/8 Inch Bore Diameter
More from Industrial & ScientificSearch only Phoenix Mfg. brand name
Current price: 15.95 USD
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
Browning P1 1 Split Taper Bushing 1 Bore"
More from Industrial & ScientificSearch only Browning brand name
Current price: 37.73 USD
Height: 0.24 Inches
Length: 0.31 Inches
Width: 0.31 Inches
Weight: 1.45 Pounds
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
Browning H 1 Split Taper Bushing 1 Bore"
More from Industrial & ScientificSearch only Browning brand name
Current price: 12.24 USD
Height: 18 Inches
Length: 23 Inches
Width: 16 Inches
Weight: 0.6 Pounds
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
Browning Q1 2 11/16 Split Taper Bushing 2-11/16 Bore"
More from Industrial & ScientificSearch only Browning brand name
Current price: 33 USD
Height: 5 Inches
Length: 3 Inches
Width: 3 Inches
Weight: 0.000625 Pounds
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
Browning H 1 1/16 Split Taper Bushing 1-1/16 Bore"
More from Industrial & ScientificSearch only Browning brand name
Current price: 21.33 USD
Weight: 0.6 Pounds
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
Browning H 1 3/8 5/16 Split Taper Bushing 1-3/8 Bore"
More from Industrial & ScientificSearch only Browning brand name
Current price: 15.77 USD
Weight: 0.01 Pounds
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
Gates 1210.3/4 Taper-Lock Bushing, 3/4" Bore, 1.0" Length, 1.2" Max Bore
More from Industrial & ScientificSearch only Gates brand name
Current price: 20.03 USD
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Mounting hardware included
- Allows precise selection of number of drive teeth or grooves in adjustable speed applications
- Carbon steel for strength and resistance to wear
- For use with Taper-Lock sheaves, sprockets and pulleys (not included)
Browning H 20 MM Split Taper Bushing 20mm Bore
More from Industrial & ScientificSearch only Browning brand name
Current price: 23 USD
Weight: 0.7 Pounds
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Mounting hardware included
- Allows precise selection of number of drive teeth or grooves in adjustable speed applications
- Carbon steel for strength and resistance to wear
- For use with Taper-Lock sheaves, sprockets and pulleys (not included)
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
Browning H 1 1/2 Split Taper Bushing 1-1/2 Bore"
More from Industrial & ScientificSearch only Browning brand name
Current price: 12.24 USD
Height: 2 Inches
Length: 3 Inches
Width: 3 Inches
Weight: 0.28 Pounds
- Interchangeable with taper lock bushings from various manufacturers
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Cast iron for resistance to wear, galling, and corrosion
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Inside Diameter Exact: 0.625"
- Keyway: 0.1875"
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Mounting hardware included
- Allows precise selection of number of drive teeth or grooves in adjustable speed applications
- Carbon steel for strength and resistance to wear
- For use with Taper-Lock sheaves, sprockets and pulleys (not included)
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
- Available in inch, metric, and spline bores. Bore range from 3/8" to 10"
- Solid flange to maintain concentric bores
- Double-split barrel for positive clamping
- External key on most sizes for positive drive and greater torque carrying capabilities
1 2 3 4 5 6 7 8 9 10