High quality Temperature Controllers. Reviews October, 2020, page 3

Inkbird ITC-308S Aquarium Heating and Cooling Dual Stage Temperature Controller Freshwater Saltwater Aquarium Tropical Fish Ornamental Shrimp

More from Tools & Home Improvement
Search only Inkbird brand name
Inkbird ITC-308S Aquarium Heating and Cooling Dual Stage Temperature Controller Freshwater Saltwater Aquarium Tropical Fish Ornamental Shrimp

Current price: 35.99 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.

More Info

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

More from Tools & Home Improvement
Search only Inkbird brand name
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

Current price: 69.99 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.

More Info

bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

More from Tools & Home Improvement
Search only bayite brand name
bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

Current price: 28.99 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display

More Info

Inkbird WiFi Temperature Controller ITC308 Reptile Freezer Thermostat Digital Heating and Cooling Heater Cooler Greenhouse Plug Outlet 2 Stage 1100W 110V

More from Tools & Home Improvement
Search only Inkbird brand name
Inkbird WiFi Temperature Controller ITC308 Reptile Freezer Thermostat Digital Heating and Cooling Heater Cooler Greenhouse Plug Outlet 2 Stage 1100W 110V

Current price: 49.99 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.

More Info

Inkbird ITC308S Temperature Controller for Aquarium with Submersible Probe, Heating Cooling Outlets Thermostat for Heater and Cooling Fans

More from Tools & Home Improvement
Search only Inkbird brand name
Inkbird ITC308S Temperature Controller for Aquarium with Submersible Probe, Heating Cooling Outlets Thermostat for Heater and Cooling Fans

Current price: 35.98 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • It's an all in one, simple solution providing control of cooling and heating.
  • Maximum output load: 1200W (110V).
  • Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
  • Fully submersible probe. Aquarium probe works better in water than standard probe.
  • Temperature Control Mode: On/Off Control. Cooling and Heating control.

More Info

Inkbird Combination Humidity Controller IHC200 Temperature Controller ITC308 Stage Pre Wired AC Dual Stage Outlet Thermostat Humidistat Cooling Heating Humidifier Dehumidifier

More from Tools & Home Improvement
Search only Inkbird brand name
Inkbird Combination Humidity Controller IHC200 Temperature Controller ITC308 Stage Pre Wired AC Dual Stage Outlet Thermostat Humidistat Cooling Heating Humidifier Dehumidifier

Current price: 72.99 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • It's an all in one, simple solution providing control of cooling and heating.
  • Maximum output load: 1200W (110V).
  • Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
  • Fully submersible probe. Aquarium probe works better in water than standard probe.
  • Temperature Control Mode: On/Off Control. Cooling and Heating control.
  • Multifunction usage. Temperature controller and humidity controller combo can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • Alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.
  • IHC-200 humidistat switch different modes between humidification and dehumidification automatically.
  • High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • ITC-308 thermostat dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.

More Info

WILLHI WH-1803B High Temperature Controller 1650W Heating and Cooling Mode -22℉~572℉110V 15A Programmable Digital Outlet Thermostat Waterproof Probe NTC Sensor for Smoker BBQ Heat Mat Temp Control

More from Tools & Home Improvement
Search only WILLHI brand name
WILLHI WH-1803B High Temperature Controller 1650W Heating and Cooling Mode -22℉~572℉110V 15A Programmable Digital Outlet Thermostat Waterproof Probe NTC Sensor for Smoker BBQ Heat Mat Temp Control

Current price: 59.99 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • It's an all in one, simple solution providing control of cooling and heating.
  • Maximum output load: 1200W (110V).
  • Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
  • Fully submersible probe. Aquarium probe works better in water than standard probe.
  • Temperature Control Mode: On/Off Control. Cooling and Heating control.
  • Multifunction usage. Temperature controller and humidity controller combo can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • Alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.
  • IHC-200 humidistat switch different modes between humidification and dehumidification automatically.
  • High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • ITC-308 thermostat dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.
  • 【Widely Applied】 - The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【High and low temperature alarm】 - Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit.
  • 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents.
  • 【High Temperature Controller 】- Our high temperature controller Probe measurement range: -30 ~300 ℃ / -22~572 ℉.

More Info

Aitrip 3pcs W1209 12V DC Digital Temperature Controller Board with 10A One-channel Relay and Waterproof Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch (With Case)

More from Tools & Home Improvement
Search only AITRIP brand name
Aitrip 3pcs W1209 12V DC Digital Temperature Controller Board with 10A One-channel Relay and Waterproof Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch (With Case)

Current price: 11.29 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • It's an all in one, simple solution providing control of cooling and heating.
  • Maximum output load: 1200W (110V).
  • Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
  • Fully submersible probe. Aquarium probe works better in water than standard probe.
  • Temperature Control Mode: On/Off Control. Cooling and Heating control.
  • Multifunction usage. Temperature controller and humidity controller combo can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • Alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.
  • IHC-200 humidistat switch different modes between humidification and dehumidification automatically.
  • High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • ITC-308 thermostat dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.
  • 【Widely Applied】 - The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【High and low temperature alarm】 - Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit.
  • 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents.
  • 【High Temperature Controller 】- Our high temperature controller Probe measurement range: -30 ~300 ℃ / -22~572 ℉.
  • The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature
  • The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling
  • Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
  • The W1209 thermostat module has a STM8S controller, a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.

More Info

Inkbird F and C Display PID Temperature Controller Thermostat ITC-106RH Relay Output AC 100 to 240V

More from Tools & Home Improvement
Search only Inkbird brand name
Inkbird F and C Display PID Temperature Controller Thermostat ITC-106RH Relay Output AC 100 to 240V

Current price: 25.99 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • It's an all in one, simple solution providing control of cooling and heating.
  • Maximum output load: 1200W (110V).
  • Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
  • Fully submersible probe. Aquarium probe works better in water than standard probe.
  • Temperature Control Mode: On/Off Control. Cooling and Heating control.
  • Multifunction usage. Temperature controller and humidity controller combo can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • Alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.
  • IHC-200 humidistat switch different modes between humidification and dehumidification automatically.
  • High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • ITC-308 thermostat dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.
  • 【Widely Applied】 - The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【High and low temperature alarm】 - Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit.
  • 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents.
  • 【High Temperature Controller 】- Our high temperature controller Probe measurement range: -30 ~300 ℃ / -22~572 ℉.
  • The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature
  • The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling
  • Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
  • The W1209 thermostat module has a STM8S controller, a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • Power Consumption: Approx. 5VA(100~240VAC)
  • High accuracy of displaying and controlling. Manual and Auto turning are available
  • Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • Support reading with Centigrade or Fahrenheit unit
  • Dual display window, be able to display measured temperature and set temperature at the same time

More Info

DIGITEN DTC151 Digital Thermostat Outlet Switch LCD Simple-Stage Plug-in Temperature Controller Thermometer 110V 15A Heating Cooling Mode for Homebrew Fermentation Greenhouse Terrarium Reptile

More from Tools & Home Improvement
Search only DIGITEN brand name
DIGITEN DTC151 Digital Thermostat Outlet Switch LCD Simple-Stage Plug-in Temperature Controller Thermometer 110V 15A Heating Cooling Mode for Homebrew Fermentation Greenhouse Terrarium Reptile

Current price: 38.69 USD


Check price and availability


  • 💦💦【Term of service】Purchase products and get a one-year warranty.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • [Maximum Output Load] 1100W(110V).
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [WIFI & APP] WIFI smart controller supports both Android & IOS(Applicable to ios13 and above),WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • It's an all in one, simple solution providing control of cooling and heating.
  • Maximum output load: 1200W (110V).
  • Temperature calibration; Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
  • Fully submersible probe. Aquarium probe works better in water than standard probe.
  • Temperature Control Mode: On/Off Control. Cooling and Heating control.
  • Multifunction usage. Temperature controller and humidity controller combo can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • Alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.
  • IHC-200 humidistat switch different modes between humidification and dehumidification automatically.
  • High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • ITC-308 thermostat dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.
  • 【Widely Applied】 - The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【High and low temperature alarm】 - Place the waterproof probe, plug the power cord in the Temp Controller . Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection】 – Our temperature controller has very safe overcurrent breaker designing, it can shut off the heater or cooler automatically if the equipment got short circuit.
  • 【UL Certification power cable】– WILLHI Digital Temperature Controller has high quality power cable, the top quality copper wire can load large currents.
  • 【High Temperature Controller 】- Our high temperature controller Probe measurement range: -30 ~300 ℃ / -22~572 ℉.
  • The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature
  • The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling
  • Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
  • The W1209 thermostat module has a STM8S controller, a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • Power Consumption: Approx. 5VA(100~240VAC)
  • High accuracy of displaying and controlling. Manual and Auto turning are available
  • Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • Support reading with Centigrade or Fahrenheit unit
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • 👍【Widely Use】: Brewing, breeding, greenhouse, household appliances, etc.
  • 👍【Temperature Unit】: Supports Centigrade or Fahrenheit.
  • 👍【Dual Modes】: Freely switch between heating and cooling modes.
  • 👍【Large LED Display】: Be able to show measured temperature and set temperature at the same time.
  • 👍【Convenience Design】: Plug and play, easy to use.

More Info

1    2    3    4    5    6    7    8    9    10