Best Temperature Controllers. Reviews September, 2020

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Search only Inkbird brand name
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Current price: 35 USD


Check price and availability


Weight: 15.2 ounces

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.

More Info

Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000 for Refrigerator Fermenter

Search only Inkbird brand name
Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000 for Refrigerator Fermenter

Current price: 15.99 USD


Check price and availability


Height: 3.3464566895 Inches

Length: 2.9527559025 Inches

Width: 1.3779527545 Inches

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.

More Info

bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V - 240V 15A

Search only bayite brand name
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-Wired, 2 Stage Heating and Cooling Mode, 110V - 240V 15A

Current price: 38.95 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.

More Info

Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding

Search only Inkbird brand name
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding

Current price: 35 USD


Check price and availability


Height: 2.67716 Inches

Length: 5.5118 Inches

Width: 1.29921 Inches

Weight: 0.771617917 Pounds

Warranty: Manufacturer warranty for 1 year from date of purchase.

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Maximum output load: 1100W(110V)
  • Support reading with Centigrade or Fahrenheit unit
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Plug and play design, easy to use;

More Info

bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

Search only bayite brand name
bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

Current price: 28.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Maximum output load: 1100W(110V)
  • Support reading with Centigrade or Fahrenheit unit
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Plug and play design, easy to use;
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display

More Info

Inkbird F Display PID Temperature Controllers Thermostat Heat Sink and Solid State Relay 100 to 240ACV ITC-106VH 40DA SSR White Heat Sink K Probe

Search only Inkbird brand name
Inkbird F Display PID Temperature Controllers Thermostat Heat Sink and Solid State Relay 100 to 240ACV ITC-106VH 40DA SSR White Heat Sink K Probe

Current price: 39.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Maximum output load: 1100W(110V)
  • Support reading with Centigrade or Fahrenheit unit
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Plug and play design, easy to use;
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • ✨✨Operating voltage range: 85~110% Rated voltage
  • ✨✨High accuracy of displaying and controlling. Manual and Auto turning are available
  • ✨✨Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • ✨✨Dual display window, be able to display measured temperature and set temperature at the same time
  • ✨✨Support reading with Centigrade or Fahrenheit unit

More Info

Pymeter Digital Temperature Controller Heat Mat Dual Thermostat Outlet Heating Cooling for Homebrew Reptile Aquarium Greenhouse Heater

Search only Pymeter brand name
Pymeter Digital Temperature Controller Heat Mat Dual Thermostat Outlet Heating Cooling for Homebrew Reptile Aquarium Greenhouse Heater

Current price: 27.99 USD

Saving: $12.00 (30%)


Check price and availability


Height: 1.57 Inches

Length: 8.26 Inches

Width: 2.16 Inches

Weight: 1.18 Pounds

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Maximum output load: 1100W(110V)
  • Support reading with Centigrade or Fahrenheit unit
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Plug and play design, easy to use;
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • ✨✨Operating voltage range: 85~110% Rated voltage
  • ✨✨High accuracy of displaying and controlling. Manual and Auto turning are available
  • ✨✨Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • ✨✨Dual display window, be able to display measured temperature and set temperature at the same time
  • ✨✨Support reading with Centigrade or Fahrenheit unit
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.

More Info

Inkbird Digital Outlet Heating Aquarium Temperature Controller ITC-306T Reptiles Heat Mat Updated Aquarium Probe

Search only Inkbird brand name
Inkbird Digital Outlet Heating Aquarium Temperature Controller ITC-306T Reptiles Heat Mat Updated Aquarium Probe

Current price: 29.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Maximum output load: 1100W(110V)
  • Support reading with Centigrade or Fahrenheit unit
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Plug and play design, easy to use;
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • ✨✨Operating voltage range: 85~110% Rated voltage
  • ✨✨High accuracy of displaying and controlling. Manual and Auto turning are available
  • ✨✨Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • ✨✨Dual display window, be able to display measured temperature and set temperature at the same time
  • ✨✨Support reading with Centigrade or Fahrenheit unit
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • 🐠🐠【Different Functions】Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 🐠🐠【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 🐠🐠【Only Heating】 Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 🐠🐠【Dual Display Window】 Be able to display measured temperature and set temperature at the same time.
  • 🐠🐠【Convenient Design】 Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.

More Info

Jonson Controls A19AAT-2C Freezer Temperature Controller (D132)

Search only Jonson Controls brand name
Jonson Controls A19AAT-2C Freezer Temperature Controller (D132)

Current price: 65.12 USD


Check price and availability


Height: 3.5 Inches

Length: 10.5 Inches

Width: 5.75 Inches

  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Maximum output load: 1100W(110V)
  • Support reading with Centigrade or Fahrenheit unit
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Plug and play design, easy to use;
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • ✨✨Operating voltage range: 85~110% Rated voltage
  • ✨✨High accuracy of displaying and controlling. Manual and Auto turning are available
  • ✨✨Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • ✨✨Dual display window, be able to display measured temperature and set temperature at the same time
  • ✨✨Support reading with Centigrade or Fahrenheit unit
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • 🐠🐠【Different Functions】Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 🐠🐠【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 🐠🐠【Only Heating】 Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 🐠🐠【Dual Display Window】 Be able to display measured temperature and set temperature at the same time.
  • 🐠🐠【Convenient Design】 Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • Very economical
  • Plug unit into wall and then run the sensor into your freezer
  • Easy to set up and use
  • Great for turning a chest freezer into a keg refrigerator

More Info

Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller ℃ ℉ Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt

Search only Inkbird brand name
Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller ℃ ℉ Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt

Current price: 15.99 USD


Check price and availability


  • 🥇🥇【Safety】Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • 🥇🥇【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 🥇🥇【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 🥇🥇【Convenient Design】Plug and play, easy to use. Support °C/°F display.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display.
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Maximum output load: 1100W(110V)
  • Support reading with Centigrade or Fahrenheit unit
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Plug and play design, easy to use;
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • ✨✨Operating voltage range: 85~110% Rated voltage
  • ✨✨High accuracy of displaying and controlling. Manual and Auto turning are available
  • ✨✨Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • ✨✨Dual display window, be able to display measured temperature and set temperature at the same time
  • ✨✨Support reading with Centigrade or Fahrenheit unit
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • 🐠🐠【Different Functions】Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 🐠🐠【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 🐠🐠【Only Heating】 Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 🐠🐠【Dual Display Window】 Be able to display measured temperature and set temperature at the same time.
  • 🐠🐠【Convenient Design】 Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • Very economical
  • Plug unit into wall and then run the sensor into your freezer
  • Easy to set up and use
  • Great for turning a chest freezer into a keg refrigerator
  • Be more user friendly than the STC-1000
  • Highly accurate and reliable temperature controller
  • Has an alarm to indicate sensor failure or high temperature
  • Can control both heating and cooling output
  • It does indeed read in deg F.

More Info

1    2    3    4    5    6    7    8    9    10