Exclusive Temperature Controllers. Reviews November, 2020, page 2

Inkbird PID Thermostat Digital Temperature Controller Alarm 1800W 120V 15A Pre Wired Output NTC Sensor R25 ℃ 10KΩ Waterproof Probe Heat Cool On Off Pump Control IPB16S

Search only Inkbird brand name
Inkbird PID Thermostat Digital Temperature Controller Alarm 1800W 120V 15A Pre Wired Output NTC Sensor R25 ℃ 10KΩ Waterproof Probe Heat Cool On Off Pump Control IPB16S

Current price: 118.99 USD


Check price and availability


  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output

More Info

HiLetgo 2pcs W1209 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with 10A One-channel Relay and Waterproof

Search only HiLetgo brand name
HiLetgo 2pcs W1209 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with 10A One-channel Relay and Waterproof

Current price: 7.99 USD

Saving: $2.00 (20%)


Check price and availability


  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.

More Info

WILLHI Digital Temperature Controller Build in Outlet 1650W 110V 15A Over Current Protection Thermostat Controller Heating Cooling -22~572℉ for Reptile Freezer Greenhouse Temperature Control, WH-1803B

Search only WILLHI brand name
WILLHI Digital Temperature Controller Build in Outlet 1650W 110V 15A Over Current Protection Thermostat Controller Heating Cooling -22~572℉ for Reptile Freezer Greenhouse Temperature Control, WH-1803B

Current price: 59.99 USD


Check price and availability


  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • 【Service and warranty】- User friendly to setup tempereture controller with professional uesr guide. We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service.
  • 【Widely Applied】- The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【Timing Delay and Alarm】- You can set 0-30 minutes shut off timing delay after temperature over or below your seted, this way the thermostat will not be turned off and on excessively. Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection- Safety】- @110V 15A 1650W output apply to most household and industrial, 14 AWG UL certification input cable, it's thicker than most products on the market, But what's more worth mentioning is the over current protection feature: with over current breaker designing, it can shut off if short circuit or over current happened.
  • 【Large Test Range of Temperature Controller】- High quality temperature controller comes from high quality probes, our temperature probe was made of NTC sensor with waterproof. Range: -30 ~300 ℃/ -22~572 ℉, Resolution: 0.1℃/ 0.1℉. Support heating and cooling model.

More Info

2PCS Temperature Controller Module with Case, XH W1209 Display Digital Thermostat Module with Waterproof NTC Probe -50~110℃ Electronic Temperature Temp Control Module Switch

Search only UMLIFE brand name
2PCS Temperature Controller Module with Case, XH W1209 Display Digital Thermostat Module with Waterproof NTC Probe -50~110℃ Electronic Temperature Temp Control Module Switch

Current price: 9.99 USD


Check price and availability


Weight: 0.2425084882 Pounds

  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • 【Service and warranty】- User friendly to setup tempereture controller with professional uesr guide. We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service.
  • 【Widely Applied】- The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【Timing Delay and Alarm】- You can set 0-30 minutes shut off timing delay after temperature over or below your seted, this way the thermostat will not be turned off and on excessively. Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection- Safety】- @110V 15A 1650W output apply to most household and industrial, 14 AWG UL certification input cable, it's thicker than most products on the market, But what's more worth mentioning is the over current protection feature: with over current breaker designing, it can shut off if short circuit or over current happened.
  • 【Large Test Range of Temperature Controller】- High quality temperature controller comes from high quality probes, our temperature probe was made of NTC sensor with waterproof. Range: -30 ~300 ℃/ -22~572 ℉, Resolution: 0.1℃/ 0.1℉. Support heating and cooling model.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.

More Info

bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Search only bayite brand name
bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Current price: 17.9 USD


Check price and availability


Height: 1.4 Inches

Length: 3.4 Inches

Width: 3 Inches

  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • 【Service and warranty】- User friendly to setup tempereture controller with professional uesr guide. We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service.
  • 【Widely Applied】- The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【Timing Delay and Alarm】- You can set 0-30 minutes shut off timing delay after temperature over or below your seted, this way the thermostat will not be turned off and on excessively. Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection- Safety】- @110V 15A 1650W output apply to most household and industrial, 14 AWG UL certification input cable, it's thicker than most products on the market, But what's more worth mentioning is the over current protection feature: with over current breaker designing, it can shut off if short circuit or over current happened.
  • 【Large Test Range of Temperature Controller】- High quality temperature controller comes from high quality probes, our temperature probe was made of NTC sensor with waterproof. Range: -30 ~300 ℃/ -22~572 ℉, Resolution: 0.1℃/ 0.1℉. Support heating and cooling model.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display

More Info

Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet Cooling Heating Pad Heat Mat Thermostat for Reptiles Homebrew Aquarium Greenhouse Terrarium Carboy Heater

Search only Pymeter brand name
Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet Cooling Heating Pad Heat Mat Thermostat for Reptiles Homebrew Aquarium Greenhouse Terrarium Carboy Heater

Current price: 36 USD

Saving: $3.99 (10%)


Check price and availability


Height: 1.57 Inches

Length: 8.26 Inches

Width: 2.16 Inches

Weight: 1.18 Pounds

  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • 【Service and warranty】- User friendly to setup tempereture controller with professional uesr guide. We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service.
  • 【Widely Applied】- The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【Timing Delay and Alarm】- You can set 0-30 minutes shut off timing delay after temperature over or below your seted, this way the thermostat will not be turned off and on excessively. Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection- Safety】- @110V 15A 1650W output apply to most household and industrial, 14 AWG UL certification input cable, it's thicker than most products on the market, But what's more worth mentioning is the over current protection feature: with over current breaker designing, it can shut off if short circuit or over current happened.
  • 【Large Test Range of Temperature Controller】- High quality temperature controller comes from high quality probes, our temperature probe was made of NTC sensor with waterproof. Range: -30 ~300 ℃/ -22~572 ℉, Resolution: 0.1℃/ 0.1℉. Support heating and cooling model.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.

More Info

bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Search only bayite brand name
bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor

Current price: 17.98 USD


Check price and availability


Height: 1.4 Inches

Length: 3.4 Inches

Width: 3 Inches

Weight: 0.31 Pounds

  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • 【Service and warranty】- User friendly to setup tempereture controller with professional uesr guide. We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service.
  • 【Widely Applied】- The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【Timing Delay and Alarm】- You can set 0-30 minutes shut off timing delay after temperature over or below your seted, this way the thermostat will not be turned off and on excessively. Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection- Safety】- @110V 15A 1650W output apply to most household and industrial, 14 AWG UL certification input cable, it's thicker than most products on the market, But what's more worth mentioning is the over current protection feature: with over current breaker designing, it can shut off if short circuit or over current happened.
  • 【Large Test Range of Temperature Controller】- High quality temperature controller comes from high quality probes, our temperature probe was made of NTC sensor with waterproof. Range: -30 ~300 ℃/ -22~572 ℉, Resolution: 0.1℃/ 0.1℉. Support heating and cooling model.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display

More Info

Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse

Search only Inkbird brand name
Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse

Current price: 14.99 USD


Check price and availability


Weight: 0.35 Pounds

  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • 【Service and warranty】- User friendly to setup tempereture controller with professional uesr guide. We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service.
  • 【Widely Applied】- The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【Timing Delay and Alarm】- You can set 0-30 minutes shut off timing delay after temperature over or below your seted, this way the thermostat will not be turned off and on excessively. Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection- Safety】- @110V 15A 1650W output apply to most household and industrial, 14 AWG UL certification input cable, it's thicker than most products on the market, But what's more worth mentioning is the over current protection feature: with over current breaker designing, it can shut off if short circuit or over current happened.
  • 【Large Test Range of Temperature Controller】- High quality temperature controller comes from high quality probes, our temperature probe was made of NTC sensor with waterproof. Range: -30 ~300 ℃/ -22~572 ℉, Resolution: 0.1℃/ 0.1℉. Support heating and cooling model.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🔶🔶Temperature Calibrating, Refrigerating control output delay protection
  • 🔶🔶Control the Temperature by Setting the Temperature Set Value and the Difference Value
  • 🔶🔶2 Relays, Switch Between Cooling and Heating Modes
  • 🔶🔶Alarm When Temperature Exceeds the Limit or When Sensor Error
  • 🔶🔶Fahrenheit and Celsius Display Can Be Choose

More Info

Inkbird Smart Temperature Controller ITC-306T WiFi Heat Lamp Thermostat Reptile Temperature Controlled Outlet for Heat Mat Fermentation,1200W,10A

Search only Inkbird brand name
Inkbird Smart Temperature Controller ITC-306T WiFi Heat Lamp Thermostat Reptile Temperature Controlled Outlet for Heat Mat Fermentation,1200W,10A

Current price: 45.99 USD


Check price and availability


Height: 4.1732283422 Inches

Length: 7.5590551104 Inches

Width: 3.4645669256 Inches

  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • 【Service and warranty】- User friendly to setup tempereture controller with professional uesr guide. We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service.
  • 【Widely Applied】- The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【Timing Delay and Alarm】- You can set 0-30 minutes shut off timing delay after temperature over or below your seted, this way the thermostat will not be turned off and on excessively. Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection- Safety】- @110V 15A 1650W output apply to most household and industrial, 14 AWG UL certification input cable, it's thicker than most products on the market, But what's more worth mentioning is the over current protection feature: with over current breaker designing, it can shut off if short circuit or over current happened.
  • 【Large Test Range of Temperature Controller】- High quality temperature controller comes from high quality probes, our temperature probe was made of NTC sensor with waterproof. Range: -30 ~300 ℃/ -22~572 ℉, Resolution: 0.1℃/ 0.1℉. Support heating and cooling model.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🔶🔶Temperature Calibrating, Refrigerating control output delay protection
  • 🔶🔶Control the Temperature by Setting the Temperature Set Value and the Difference Value
  • 🔶🔶2 Relays, Switch Between Cooling and Heating Modes
  • 🔶🔶Alarm When Temperature Exceeds the Limit or When Sensor Error
  • 🔶🔶Fahrenheit and Celsius Display Can Be Choose
  • 【2 Cycle Timer】Inkbird ITC-306T temperature controller supports 2 cycle timer in 24 hours.
  • 【Digital Displays】Both the measured temp & set temp are displayed on Inkbird temperature controller.
  • 【Double Outlets】Supports plug-in 2 heating devices, like 2 heaters(1200W 10A Max).
  • 【APP Features】Temp graphs, alarms, ℃/℉ switch & timer. All can be set through the Inkbird Pro app.
  • 【WiFi-Enable】Inkbird Smart Temperature Controllers support WiFi connection and control.

More Info

Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit

Search only Inkbird brand name
Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit

Current price: 15.99 USD


Check price and availability


  • Quick switch between auto mode and manual mode
  • Fahrenheit and Celsius Display Can Be Choose
  • Maximum OUTPUT LOAD:1800W (120V,15A); Temperature measure range: -58~257℉.The accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • Waterproof NTC temperature sensor (R25 ℃=10KΩ)
  • One Heat -OR- Cool Output & One Pump Output
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • 【Service and warranty】- User friendly to setup tempereture controller with professional uesr guide. We provide this WILLHI Digital Temperature Controller with 6-Month Warranty and 24hours customer service.
  • 【Widely Applied】- The thermostat can be used to control a wide variety of refrigeration and heating, seedling heat mat,pet breeding,incubation,HVAC equipment, accelerating germination,electric radiator, electric oven,fermentation, grow tent, home brewing, aquarium, Smoker and BBQ, etc.
  • 【Timing Delay and Alarm】- You can set 0-30 minutes shut off timing delay after temperature over or below your seted, this way the thermostat will not be turned off and on excessively. Set the maximum desired temperature for the heat mat. Alarm when temperature exceeds the limit or when sensor error.
  • 【Overcurrent Protection- Safety】- @110V 15A 1650W output apply to most household and industrial, 14 AWG UL certification input cable, it's thicker than most products on the market, But what's more worth mentioning is the over current protection feature: with over current breaker designing, it can shut off if short circuit or over current happened.
  • 【Large Test Range of Temperature Controller】- High quality temperature controller comes from high quality probes, our temperature probe was made of NTC sensor with waterproof. Range: -30 ~300 ℃/ -22~572 ℉, Resolution: 0.1℃/ 0.1℉. Support heating and cooling model.
  • ✹✹ The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling【Note: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)】.
  • ✹✹ The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature.
  • ✹✹ Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
  • ✹✹ Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.Input Power (DC): 12V; Measuring Inputs: NTC (10K 0.5%) ; Waterproof Sensor: 0.5M; Output: 1 Channel Relay Output, Capacity: 10A; Power Consumption: Static Current: 35mA; Current: 65mA.
  • ✹✹ The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • ✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.
  • ✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
  • ✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
  • ✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
  • ✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Simplified Design---Easy to set. Support °F display
  • 🔶🔶Temperature Calibrating, Refrigerating control output delay protection
  • 🔶🔶Control the Temperature by Setting the Temperature Set Value and the Difference Value
  • 🔶🔶2 Relays, Switch Between Cooling and Heating Modes
  • 🔶🔶Alarm When Temperature Exceeds the Limit or When Sensor Error
  • 🔶🔶Fahrenheit and Celsius Display Can Be Choose
  • 【2 Cycle Timer】Inkbird ITC-306T temperature controller supports 2 cycle timer in 24 hours.
  • 【Digital Displays】Both the measured temp & set temp are displayed on Inkbird temperature controller.
  • 【Double Outlets】Supports plug-in 2 heating devices, like 2 heaters(1200W 10A Max).
  • 【APP Features】Temp graphs, alarms, ℃/℉ switch & timer. All can be set through the Inkbird Pro app.
  • 【WiFi-Enable】Inkbird Smart Temperature Controllers support WiFi connection and control.
  • 🔆🔆Switch between refrigeration and heating modes, temperature calibration.
  • 🔆🔆Alarm when temperature is out of limit or sensor is wrong.
  • 🔆🔆By setting the temperature set-point and the difference between the temperature set-point and the difference.
  • 🔆🔆Overheat Protection of Home Appliances, hatching, Seedling pads, constant temperature Circulation and other Electrical Appliances.
  • 🔆🔆There are two relays. Switch between cooling and heating modes. Support for °F / °C display.

More Info

1    2    3    4    5    6    7    8    9    10