High quality Temperature Controllers. Reviews November, 2020, page 3

Inkbird ITC308 Freezer Thermostat Heating Cooling Plug Temperature Controller Outlet 110V 1200W Digital Temp Control for Greenhouse Heater Cooler Reptile Brewing Fermentation Kegerator Probe

Search only Inkbird brand name
Inkbird ITC308 Freezer Thermostat Heating Cooling Plug Temperature Controller Outlet 110V 1200W Digital Temp Control for Greenhouse Heater Cooler Reptile Brewing Fermentation Kegerator Probe

Current price: 34.99 USD


Check price and availability


Weight: 0.9 Pounds

  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.

More Info

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

Search only Inkbird brand name
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

Current price: 69.99 USD


Check price and availability


  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.

More Info

Briidea Digital Temperature Controller Thermostat Heating and Cooling Mode for Seed Germination Reptiles Homebrew Greenhouse 2-Stage Outlet 3600W 30A

Search only briidea brand name
Briidea Digital Temperature Controller Thermostat Heating and Cooling Mode for Seed Germination Reptiles Homebrew Greenhouse 2-Stage Outlet 3600W 30A

Current price: 32.99 USD


Check price and availability


Height: 1.4 Inches

Length: 8.1 Inches

Width: 3.3 Inches

Weight: 1.5 Pounds

  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • [Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation
  • [Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
  • [Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
  • [Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
  • [Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling

More Info

DIGITEN DTC151 Digital Thermostat Outlet Switch LCD Simple-Stage Plug-in Temperature Controller Thermometer 110V 15A Heating Cooling Mode for Homebrew Fermentation Greenhouse Terrarium Reptile

Search only DIGITEN brand name
DIGITEN DTC151 Digital Thermostat Outlet Switch LCD Simple-Stage Plug-in Temperature Controller Thermometer 110V 15A Heating Cooling Mode for Homebrew Fermentation Greenhouse Terrarium Reptile

Current price: 38.69 USD


Check price and availability


  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • [Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation
  • [Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
  • [Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
  • [Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
  • [Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling
  • 👍【Widely Use】: Brewing, breeding, greenhouse, household appliances, etc.
  • 👍【Temperature Unit】: Supports Centigrade or Fahrenheit.
  • 👍【Dual Modes】: Freely switch between heating and cooling modes.
  • 👍【Large LED Display】: Be able to show measured temperature and set temperature at the same time.
  • 👍【Convenience Design】: Plug and play, easy to use.

More Info

Inkbird 10A 110V Digital Thermostat Temperature Controller with Heat and Cool Relays ITC-308 Homebrewing Breeding Incubation Sous Vide

Search only Inkbird brand name
Inkbird 10A 110V Digital Thermostat Temperature Controller with Heat and Cool Relays ITC-308 Homebrewing Breeding Incubation Sous Vide

Current price: 34.99 USD


Check price and availability


Height: 2.67716 Inches

Length: 5.5118 Inches

Width: 1.29921 Inches

Weight: 0.771617917 Pounds

  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • [Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation
  • [Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
  • [Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
  • [Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
  • [Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling
  • 👍【Widely Use】: Brewing, breeding, greenhouse, household appliances, etc.
  • 👍【Temperature Unit】: Supports Centigrade or Fahrenheit.
  • 👍【Dual Modes】: Freely switch between heating and cooling modes.
  • 👍【Large LED Display】: Be able to show measured temperature and set temperature at the same time.
  • 👍【Convenience Design】: Plug and play, easy to use.
  • 👍👍【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 👍👍【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 👍👍【Safe】Maximum output load: 1100W(110V).
  • 👍👍【Reading Mode】Support reading with Centigrade or Fahrenheit unit.
  • 👍👍【Convenient Design】Plug and play, easy to use.

More Info

Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range

Search only Learn To Brew LLC brand name
Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range

Current price: 89.99 USD


Check price and availability


Height: 5 Inches

Length: 7.5 Inches

Width: 6.75 Inches

Weight: 2.25 Pounds

  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • [Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation
  • [Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
  • [Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
  • [Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
  • [Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling
  • 👍【Widely Use】: Brewing, breeding, greenhouse, household appliances, etc.
  • 👍【Temperature Unit】: Supports Centigrade or Fahrenheit.
  • 👍【Dual Modes】: Freely switch between heating and cooling modes.
  • 👍【Large LED Display】: Be able to show measured temperature and set temperature at the same time.
  • 👍【Convenience Design】: Plug and play, easy to use.
  • 👍👍【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 👍👍【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 👍👍【Safe】Maximum output load: 1100W(110V).
  • 👍👍【Reading Mode】Support reading with Centigrade or Fahrenheit unit.
  • 👍👍【Convenient Design】Plug and play, easy to use.
  • In stock - Ships FAST!
  • The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
  • Replaces the popular A419 Johnson Control model with upgraded technology.
  • Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
  • Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c

More Info

Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller ℃ ℉ Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt

Search only Inkbird brand name
Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller ℃ ℉ Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt

Current price: 15.99 USD


Check price and availability


  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • [Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation
  • [Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
  • [Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
  • [Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
  • [Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling
  • 👍【Widely Use】: Brewing, breeding, greenhouse, household appliances, etc.
  • 👍【Temperature Unit】: Supports Centigrade or Fahrenheit.
  • 👍【Dual Modes】: Freely switch between heating and cooling modes.
  • 👍【Large LED Display】: Be able to show measured temperature and set temperature at the same time.
  • 👍【Convenience Design】: Plug and play, easy to use.
  • 👍👍【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 👍👍【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 👍👍【Safe】Maximum output load: 1100W(110V).
  • 👍👍【Reading Mode】Support reading with Centigrade or Fahrenheit unit.
  • 👍👍【Convenient Design】Plug and play, easy to use.
  • In stock - Ships FAST!
  • The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
  • Replaces the popular A419 Johnson Control model with upgraded technology.
  • Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
  • Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
  • Be more user friendly than the STC-1000
  • Highly accurate and reliable temperature controller
  • Has an alarm to indicate sensor failure or high temperature
  • Can control both heating and cooling output
  • It does indeed read in deg F.

More Info

Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller

Search only Inkbird brand name
Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller

Current price: 72.99 USD


Check price and availability


  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • [Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation
  • [Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
  • [Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
  • [Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
  • [Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling
  • 👍【Widely Use】: Brewing, breeding, greenhouse, household appliances, etc.
  • 👍【Temperature Unit】: Supports Centigrade or Fahrenheit.
  • 👍【Dual Modes】: Freely switch between heating and cooling modes.
  • 👍【Large LED Display】: Be able to show measured temperature and set temperature at the same time.
  • 👍【Convenience Design】: Plug and play, easy to use.
  • 👍👍【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 👍👍【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 👍👍【Safe】Maximum output load: 1100W(110V).
  • 👍👍【Reading Mode】Support reading with Centigrade or Fahrenheit unit.
  • 👍👍【Convenient Design】Plug and play, easy to use.
  • In stock - Ships FAST!
  • The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
  • Replaces the popular A419 Johnson Control model with upgraded technology.
  • Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
  • Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
  • Be more user friendly than the STC-1000
  • Highly accurate and reliable temperature controller
  • Has an alarm to indicate sensor failure or high temperature
  • Can control both heating and cooling output
  • It does indeed read in deg F.
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.

More Info

F/C PID Temperature Controller, AGPtEK Dual Display Digital Programmable Temperature Control TA4-SSR Solid State Relay with 2 Alarms

Search only AGPTEK brand name
F/C PID Temperature Controller, AGPtEK Dual Display Digital Programmable Temperature Control TA4-SSR Solid State Relay with 2 Alarms

Current price: 27.99 USD


Check price and availability


  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • [Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation
  • [Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
  • [Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
  • [Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
  • [Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling
  • 👍【Widely Use】: Brewing, breeding, greenhouse, household appliances, etc.
  • 👍【Temperature Unit】: Supports Centigrade or Fahrenheit.
  • 👍【Dual Modes】: Freely switch between heating and cooling modes.
  • 👍【Large LED Display】: Be able to show measured temperature and set temperature at the same time.
  • 👍【Convenience Design】: Plug and play, easy to use.
  • 👍👍【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 👍👍【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 👍👍【Safe】Maximum output load: 1100W(110V).
  • 👍👍【Reading Mode】Support reading with Centigrade or Fahrenheit unit.
  • 👍👍【Convenient Design】Plug and play, easy to use.
  • In stock - Ships FAST!
  • The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
  • Replaces the popular A419 Johnson Control model with upgraded technology.
  • Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
  • Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
  • Be more user friendly than the STC-1000
  • Highly accurate and reliable temperature controller
  • Has an alarm to indicate sensor failure or high temperature
  • Can control both heating and cooling output
  • It does indeed read in deg F.
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
  • ♦ Wide Application: This pid controller ssr is widely used in auto system in line of light industry, chemistry, machine, metallurgy, ceramics, pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc.
  • ♦ Easy Operation: Only one key operation needed for this digital temperature controller, Auto-tuning PID/ Fuzzy PID control. It is simple to operate with reliable performance.
  • ♦ Dual Output: 7 different Dual Output combinations with 1 relayed output and 1 SSR control voltage output.
  • ♦ PID Control: Individually programmable PID control parameters, P, I, d, controlling period, digital filter coefficient, and more… (for control theory experts only)
  • ♦ Dual Display: This PID temperature controller has dual display for Fahrenheit (F) and Celsius(C). The AGPtEK temperature controller supports reading with Centigrade or Fahrenheit unit.

More Info

LM YN DC 12V Digital Thermostat Module -58℉ to + 257℉ Fahrenheit Temp Display Temperature Controller Board With 20A Relay Waterproof Sensor Probe Dual LED Display Red & Blue

Search only LM YN brand name
LM YN DC 12V Digital Thermostat Module -58℉ to + 257℉ Fahrenheit Temp Display Temperature Controller Board With 20A Relay Waterproof Sensor Probe Dual LED Display Red & Blue

Current price: 10.99 USD


Check price and availability


  • Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
  • Can display in Centigrade or Fahrenheit.
  • Easily calibrated.
  • Be able to connect with refrigeration and heating equipment at the same time.
  • Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • [Multifunction Usage] This thermostat can be widely utilized in home brewing, greenhouse, accelerating germination, fermentation, greenhouse plants, kombucha, sous-vide, terrarium, aquarium and incubation
  • [Simple Design and Easy Operation] Just plug the thermostat in the wall socket and then plug the appliance into the thermostat. Afterwards the thermostat will track the surrounding temperature where you put the probe and convey the orders to the appliance
  • [Two Installation Methods] Two installation methods are offered, of which one is pasting by traceless glue which means perforation free in the wall; the other one is fixing by expansion valve and nail. Both of them will fix the thermostat firmly attached onto the wall
  • [Dual Display Window] Necessary parameters and information will be shown either in PV or SV display window. Besides, reading with Centigrade or Fahrenheit unit is supported
  • [Powerful Function] Temperature controller used for heating and cooling. Provided with 2 outputs that it is able to connect with refrigeration and heating equipment. Separately Work1 output is for heating and Work 2 output is for cooling
  • 👍【Widely Use】: Brewing, breeding, greenhouse, household appliances, etc.
  • 👍【Temperature Unit】: Supports Centigrade or Fahrenheit.
  • 👍【Dual Modes】: Freely switch between heating and cooling modes.
  • 👍【Large LED Display】: Be able to show measured temperature and set temperature at the same time.
  • 👍【Convenience Design】: Plug and play, easy to use.
  • 👍👍【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
  • 👍👍【Dual Relay Output】Be able to connect with refrigeration and heating equipment at the same time.
  • 👍👍【Safe】Maximum output load: 1100W(110V).
  • 👍👍【Reading Mode】Support reading with Centigrade or Fahrenheit unit.
  • 👍👍【Convenient Design】Plug and play, easy to use.
  • In stock - Ships FAST!
  • The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
  • Replaces the popular A419 Johnson Control model with upgraded technology.
  • Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
  • Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
  • Be more user friendly than the STC-1000
  • Highly accurate and reliable temperature controller
  • Has an alarm to indicate sensor failure or high temperature
  • Can control both heating and cooling output
  • It does indeed read in deg F.
  • 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
  • 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
  • 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
  • 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
  • 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
  • ♦ Wide Application: This pid controller ssr is widely used in auto system in line of light industry, chemistry, machine, metallurgy, ceramics, pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc.
  • ♦ Easy Operation: Only one key operation needed for this digital temperature controller, Auto-tuning PID/ Fuzzy PID control. It is simple to operate with reliable performance.
  • ♦ Dual Output: 7 different Dual Output combinations with 1 relayed output and 1 SSR control voltage output.
  • ♦ PID Control: Individually programmable PID control parameters, P, I, d, controlling period, digital filter coefficient, and more… (for control theory experts only)
  • ♦ Dual Display: This PID temperature controller has dual display for Fahrenheit (F) and Celsius(C). The AGPtEK temperature controller supports reading with Centigrade or Fahrenheit unit.
  • LM YN Digital Thermostat Module User Manual Download Link: https://www.amazon.com/clouddrive/share/2erQJUA07h19hgz1mIik6kOeJZWPSZkNSfBaZtjWFaJ
  • Measuring input: 1 meter NTC (10K 0.5%) waterproof metal sensors. Relay Load: DC 14V 20A / AC 125V 20A.
  • Temperature measurement accuracy: 1 ℉. Backlash accuracy: 0.1 ℉. Refresh rate: about 0.5S. Input Power: DC 12V.
  • Temperature range:-58℉ to + 257℉ ; Resolution: temperature range -3.9℉ ~ 99.9 ℉ is 0.1℉, other temperature ranges 1 ℉.
  • Upgrade Models. Digital display is modified to Fahrenheit temperature display (old section is Celsius display). Dual LED display, Red + Blue, Precise temperature control, high sensitivity, suitable for any occasion required temperature.

More Info

1    2    3    4    5    6    7    8    9    10