Best Thermal Air Temperature Control Valves. Reviews September, 2020

Trounistro 6 Pack BPV-31 Bullet Piercing Valve Line Tap Valve Kits Adjustable Valve for Air Conditioners HVAC 1/4", 5/16", 3/8" Tubing

Search only trounistro brand name
Trounistro 6 Pack BPV-31 Bullet Piercing Valve Line Tap Valve Kits Adjustable Valve for Air Conditioners HVAC 1/4

Current price: 22.98 USD


Check price and availability


  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use

More Info

Genuine Honda 79710-SDA-A01 Water Valve Assembly

Search only Honda brand name
Genuine Honda 79710-SDA-A01 Water Valve Assembly

Current price: 23.8 USD

Saving: $3.35 (12%)


Check price and availability


Warranty: 1 Year Warranty, Please Contact Us For An Easy No Hassle Warranty Replacement

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part

More Info

Camco 10471/10473 3/4" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe

Search only Unknown brand name
Camco 10471/10473 3/4

Current price: 13.15 USD

Saving: $5.11 (28%)


Check price and availability


Height: 11.38 Inches

Length: 1.5 Inches

Width: 3.63 Inches

Weight: 0.45 Pounds

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Listed to ANSI Z21.22
  • Brass body with stainless spring
  • 4" probe
  • Factory set at 150 PSI and 210F
  • 3/4" NPT connection

More Info

ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor

Search only ARB brand name
ARB CKMTA12 '12V' On-Board Twin High Performance Air Compressor

Current price: 542.23 USD

Saving: $67.76 (11%)


Check price and availability


Height: 4.72 Inches

Length: 19.69 Inches

Width: 10.24 Inches

Weight: 0.1 Pounds

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Listed to ANSI Z21.22
  • Brass body with stainless spring
  • 4" probe
  • Factory set at 150 PSI and 210F
  • 3/4" NPT connection
  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.

More Info

Genuine GM 89018365 A/C Temperature Valve Actuator

Search only GM brand name
Genuine GM 89018365 A/C Temperature Valve Actuator

Current price: 152.42 USD


Check price and availability


Height: 4 Inches

Length: 6 Inches

Width: 4 Inches

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Listed to ANSI Z21.22
  • Brass body with stainless spring
  • 4" probe
  • Factory set at 150 PSI and 210F
  • 3/4" NPT connection
  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • GM
  • 89018365
  • Fan Air Vent Blend Door Actuator
  • OEM NEW Fan Air Vent Blend Door Actuator Heat Hear AC A/C Genuine 89018365

More Info

Genuine Honda 79710-S0X-A01 Water Valve Assembly

Search only Honda brand name
Genuine Honda 79710-S0X-A01 Water Valve Assembly

Current price: 22.2 USD


Check price and availability


Height: 3 Inches

Length: 10 Inches

Width: 9 Inches

Warranty: 1 Year Warranty, Please Contact Us For An Easy No Hassle Warranty Replacement

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Listed to ANSI Z21.22
  • Brass body with stainless spring
  • 4" probe
  • Factory set at 150 PSI and 210F
  • 3/4" NPT connection
  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • GM
  • 89018365
  • Fan Air Vent Blend Door Actuator
  • OEM NEW Fan Air Vent Blend Door Actuator Heat Hear AC A/C Genuine 89018365
  • Honda Control Valve fits 1999 to 2004 Odyssey and 2003 to 2004 Pilot
  • Made in China
  • Package Dimensions: 12.953 L x 5.08 H x 15.24 W (centimeters)

More Info

Dorman 216-5403CD Center Dashboard Air Vent for Select Kenworth Trucks

Search only Dorman brand name
Dorman 216-5403CD Center Dashboard Air Vent for Select Kenworth Trucks

Current price: 24.41 USD


Check price and availability


Height: 8.25 Inches

Length: 1.8 Inches

Width: 3.469 Inches

Warranty: Limited Lifetime

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Listed to ANSI Z21.22
  • Brass body with stainless spring
  • 4" probe
  • Factory set at 150 PSI and 210F
  • 3/4" NPT connection
  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • GM
  • 89018365
  • Fan Air Vent Blend Door Actuator
  • OEM NEW Fan Air Vent Blend Door Actuator Heat Hear AC A/C Genuine 89018365
  • Honda Control Valve fits 1999 to 2004 Odyssey and 2003 to 2004 Pilot
  • Made in China
  • Package Dimensions: 12.953 L x 5.08 H x 15.24 W (centimeters)
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
  • No special tools necessary
  • Direct replacement for a proper fit
  • High-quality plastic construction for lasting durability
  • A necessary replacement item for a comfortable ride. Dorman Dashboard Air Vents stand up to daily wear and tear, ensuring continuous control over air flow direction. On certain applications, multiple vent options (such as left, right and center) are available.

More Info

Genuine GM 89018681 A/C Temperature Valve Actuator

Search only Genuine GM brand name
Genuine GM 89018681 A/C Temperature Valve Actuator

Current price: 61.03 USD


Check price and availability


Height: 7 Inches

Length: 11 Inches

Width: 3 Inches

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Listed to ANSI Z21.22
  • Brass body with stainless spring
  • 4" probe
  • Factory set at 150 PSI and 210F
  • 3/4" NPT connection
  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • GM
  • 89018365
  • Fan Air Vent Blend Door Actuator
  • OEM NEW Fan Air Vent Blend Door Actuator Heat Hear AC A/C Genuine 89018365
  • Honda Control Valve fits 1999 to 2004 Odyssey and 2003 to 2004 Pilot
  • Made in China
  • Package Dimensions: 12.953 L x 5.08 H x 15.24 W (centimeters)
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
  • No special tools necessary
  • Direct replacement for a proper fit
  • High-quality plastic construction for lasting durability
  • A necessary replacement item for a comfortable ride. Dorman Dashboard Air Vents stand up to daily wear and tear, ensuring continuous control over air flow direction. On certain applications, multiple vent options (such as left, right and center) are available.
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part

More Info

Dorman 216-5402CD Passenger Side Dashboard Air Vent for Select Kenworth Trucks

Search only Dorman brand name
Dorman 216-5402CD Passenger Side Dashboard Air Vent for Select Kenworth Trucks

Current price: 24.09 USD


Check price and availability


Height: 8.25 Inches

Length: 2.3 Inches

Width: 5.5 Inches

Warranty: Limited Lifetime

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Listed to ANSI Z21.22
  • Brass body with stainless spring
  • 4" probe
  • Factory set at 150 PSI and 210F
  • 3/4" NPT connection
  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • GM
  • 89018365
  • Fan Air Vent Blend Door Actuator
  • OEM NEW Fan Air Vent Blend Door Actuator Heat Hear AC A/C Genuine 89018365
  • Honda Control Valve fits 1999 to 2004 Odyssey and 2003 to 2004 Pilot
  • Made in China
  • Package Dimensions: 12.953 L x 5.08 H x 15.24 W (centimeters)
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
  • No special tools necessary
  • Direct replacement for a proper fit
  • High-quality plastic construction for lasting durability
  • A necessary replacement item for a comfortable ride. Dorman Dashboard Air Vents stand up to daily wear and tear, ensuring continuous control over air flow direction. On certain applications, multiple vent options (such as left, right and center) are available.
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
  • No special tools necessary
  • Direct replacement for a proper fit
  • High-quality plastic construction for lasting durability
  • A necessary replacement item for a comfortable ride. Dorman Dashboard Air Vents stand up to daily wear and tear, ensuring continuous control over air flow direction. On certain applications, multiple vent options (such as left, right and center) are available.

More Info

Genuine GM 52474810 A/C Temperature Valve Actuator

Search only Genuine GM brand name
Genuine GM 52474810 A/C Temperature Valve Actuator

Current price: 76.61 USD


Check price and availability


Height: 4.2 Inches

Length: 4.3 Inches

Width: 2.1 Inches

Weight: 0.35 Pounds

  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing, replace part No. AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits; Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough quantity for your use
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Listed to ANSI Z21.22
  • Brass body with stainless spring
  • 4" probe
  • Factory set at 150 PSI and 210F
  • 3/4" NPT connection
  • 5- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
  • 4- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • 3- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
  • 2- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
  • 1- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • GM
  • 89018365
  • Fan Air Vent Blend Door Actuator
  • OEM NEW Fan Air Vent Blend Door Actuator Heat Hear AC A/C Genuine 89018365
  • Honda Control Valve fits 1999 to 2004 Odyssey and 2003 to 2004 Pilot
  • Made in China
  • Package Dimensions: 12.953 L x 5.08 H x 15.24 W (centimeters)
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
  • No special tools necessary
  • Direct replacement for a proper fit
  • High-quality plastic construction for lasting durability
  • A necessary replacement item for a comfortable ride. Dorman Dashboard Air Vents stand up to daily wear and tear, ensuring continuous control over air flow direction. On certain applications, multiple vent options (such as left, right and center) are available.
  • OEM
  • this is not an aftermarket part
  • best in quality
  • durable
  • exact fit
  • genuine oem factory part
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
  • No special tools necessary
  • Direct replacement for a proper fit
  • High-quality plastic construction for lasting durability
  • A necessary replacement item for a comfortable ride. Dorman Dashboard Air Vents stand up to daily wear and tear, ensuring continuous control over air flow direction. On certain applications, multiple vent options (such as left, right and center) are available.
  • Country of Origin : China
  • Package Dimensions: 10.5 H x 5.1 L x 10.4 W (centimetres)
  • Package Weight: 0.174 kilograms

More Info

1    2    3    4    5    6    7    8    9    10