Best Thread Forming . Reviews September, 2020

Small Parts 25C150T6FDQ/F 1/4-20 X 1 1/2" 6 Lobe (T-30) Type F Head Thread Cutting floorboard Screw Phos & Oil, Steel, 1/4"-20, Flat, Black (Pack of 100)

Search only Small Parts brand name
Small Parts 25C150T6FDQ/F 1/4-20 X 1 1/2

Current price: 12.69 USD


Check price and availability


Length: 1.5 Inches

  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw

More Info

410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #10-14 Thread Size, 1/2" Length (Pack of 50)

Search only Small Parts brand name
410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #10-14 Thread Size, 1/2

Current price: 7.94 USD


Check price and availability


Length: 0.5 Inches

Weight: 0.26 Pounds

  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic

More Info

Union Butterfield 16415/16X18H5 Thread Forming Taps, TIN Coating, Full Bottoming, UNC5/16, Full Length 2.23/32", Flute Length 11/16", Shank Diameter 0.318"

Search only Union Butterfield brand name
Union Butterfield 16415/16X18H5 Thread Forming Taps, TIN Coating, Full Bottoming, UNC5/16, Full Length 2.23/32

Current price: 52.73 USD


Check price and availability


  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic
  • Hss-pm material
  • Right direction
  • TiN coating

More Info

Union Butterfield 1580(UNC) High-Speed Steel Thread Forming Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, H4 Tolerance, 1/4"-20 Thread Size

Search only Union Butterfield brand name
Union Butterfield 1580(UNC) High-Speed Steel Thread Forming Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, H4 Tolerance, 1/4

Current price: 18.24 USD


Check price and availability


Weight: 0.000625 Pounds

  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic
  • Hss-pm material
  • Right direction
  • TiN coating
  • Round shank with square end helps to minimize rotation in the tool holder
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications
  • High-speed steel for compatibility with a variety of materials
  • Spiral forming lobe pattern for reducing tapping torque
  • Cold-forms threads in through holes and blind holes without producing chips

More Info

M1.6 X 3.2mm Plastic Thread Forming Screw Stainless Steel Black Zinc Flat Head Phillips Drive (100 Pcs) - M16-32-P-BSS-FH

Search only brand name
M1.6 X 3.2mm Plastic Thread Forming Screw Stainless Steel Black Zinc Flat Head Phillips Drive (100 Pcs) - M16-32-P-BSS-FH

Current price: 60 USD


Check price and availability


  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic
  • Hss-pm material
  • Right direction
  • TiN coating
  • Round shank with square end helps to minimize rotation in the tool holder
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications
  • High-speed steel for compatibility with a variety of materials
  • Spiral forming lobe pattern for reducing tapping torque
  • Cold-forms threads in through holes and blind holes without producing chips
  • Head: 90deg Flat Head Phillips Drive
  • Material: Stainless Steel with Black Zinc Plate
  • Threaded Length: 3.2mm
  • Thread Pitch: 0.64
  • Thread Size: M1.6

More Info

(100pk) 5/16-18 X 2-1/2 Flat Torx Trailer Floorboard Screws Tri-Point Black Phosphate Thread Forming T40

Search only JWYN brand name
(100pk) 5/16-18 X 2-1/2 Flat Torx Trailer Floorboard Screws Tri-Point Black Phosphate Thread Forming T40

Current price: 18.99 USD


Check price and availability


  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic
  • Hss-pm material
  • Right direction
  • TiN coating
  • Round shank with square end helps to minimize rotation in the tool holder
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications
  • High-speed steel for compatibility with a variety of materials
  • Spiral forming lobe pattern for reducing tapping torque
  • Cold-forms threads in through holes and blind holes without producing chips
  • Head: 90deg Flat Head Phillips Drive
  • Material: Stainless Steel with Black Zinc Plate
  • Threaded Length: 3.2mm
  • Thread Pitch: 0.64
  • Thread Size: M1.6
  • 2-1/2 Inches long
  • Tri-Point with 5/16-18 Threads
  • Flat Torx Head
  • Black Phosphate Hardened Steel
  • Thread Forming Screws

More Info

410 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 1/4"-20 Thread Size, 3/4" Length (Pack of 10)

Search only Small Parts brand name
410 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Slotted Drive, Type F, 1/4

Current price: 6.1 USD

Saving: $0.63 (9%)


Check price and availability


Length: 0.75 Inches

Weight: 0.02 Pounds

  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic
  • Hss-pm material
  • Right direction
  • TiN coating
  • Round shank with square end helps to minimize rotation in the tool holder
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications
  • High-speed steel for compatibility with a variety of materials
  • Spiral forming lobe pattern for reducing tapping torque
  • Cold-forms threads in through holes and blind holes without producing chips
  • Head: 90deg Flat Head Phillips Drive
  • Material: Stainless Steel with Black Zinc Plate
  • Threaded Length: 3.2mm
  • Thread Pitch: 0.64
  • Thread Size: M1.6
  • 2-1/2 Inches long
  • Tri-Point with 5/16-18 Threads
  • Flat Torx Head
  • Black Phosphate Hardened Steel
  • Thread Forming Screws
  • Slotted drive has a linear slot for use with a flat-blade driver
  • Hex washer head has a flange for additional grip with the mating surface
  • Plain surface has no finish or coating
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic

More Info

5 Piece NPT Thread Forming Taps, Pipe taps are designed to clean or re-thread damaged or Jam Pipe threads, size: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt

Search only WMAZtool brand name
5 Piece NPT Thread Forming Taps, Pipe taps are designed to clean or re-thread damaged or Jam Pipe threads, size: 1/8

Current price: 26.99 USD


Check price and availability


  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic
  • Hss-pm material
  • Right direction
  • TiN coating
  • Round shank with square end helps to minimize rotation in the tool holder
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications
  • High-speed steel for compatibility with a variety of materials
  • Spiral forming lobe pattern for reducing tapping torque
  • Cold-forms threads in through holes and blind holes without producing chips
  • Head: 90deg Flat Head Phillips Drive
  • Material: Stainless Steel with Black Zinc Plate
  • Threaded Length: 3.2mm
  • Thread Pitch: 0.64
  • Thread Size: M1.6
  • 2-1/2 Inches long
  • Tri-Point with 5/16-18 Threads
  • Flat Torx Head
  • Black Phosphate Hardened Steel
  • Thread Forming Screws
  • Slotted drive has a linear slot for use with a flat-blade driver
  • Hex washer head has a flange for additional grip with the mating surface
  • Plain surface has no finish or coating
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads

More Info

Mxfans HSS 1/2 inch NPT Thread Forming Taps Round Shank with Square End

Search only Mxfans brand name
Mxfans HSS 1/2 inch NPT Thread Forming Taps Round Shank with Square End

Current price: 10.7 USD


Check price and availability


  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic
  • Hss-pm material
  • Right direction
  • TiN coating
  • Round shank with square end helps to minimize rotation in the tool holder
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications
  • High-speed steel for compatibility with a variety of materials
  • Spiral forming lobe pattern for reducing tapping torque
  • Cold-forms threads in through holes and blind holes without producing chips
  • Head: 90deg Flat Head Phillips Drive
  • Material: Stainless Steel with Black Zinc Plate
  • Threaded Length: 3.2mm
  • Thread Pitch: 0.64
  • Thread Size: M1.6
  • 2-1/2 Inches long
  • Tri-Point with 5/16-18 Threads
  • Flat Torx Head
  • Black Phosphate Hardened Steel
  • Thread Forming Screws
  • Slotted drive has a linear slot for use with a flat-blade driver
  • Hex washer head has a flange for additional grip with the mating surface
  • Plain surface has no finish or coating
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • If you have any questions about product, please feel free to contact us.
  • Round shank with square end, square end size: 0.55 x 0.55in
  • 1/2" NPT pipe taps Used to clean and chase rusted threads.
  • Made of HSS(High Speed Steel) Material.
  • Please read the dimensions carefully before buying this product.

More Info

uxcell Machine Tap 4-40UNC Thread Pitch 2B Class 3 Flutes High Speed Steel with Protective Box 2pcs

Search only uxcell brand name
uxcell Machine Tap 4-40UNC Thread Pitch 2B Class 3 Flutes High Speed Steel with Protective Box 2pcs

Current price: 10.19 USD


Check price and availability


  • Flat Head
  • 6 lobe drive T-30 drive
  • Phos & Oil Finish
  • Type F thread cutting floorboard screw
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Passivated finish enhances the natural corrosion resistance of stainless steel
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread rolling screw recommended for use in plastic
  • Hss-pm material
  • Right direction
  • TiN coating
  • Round shank with square end helps to minimize rotation in the tool holder
  • Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications
  • High-speed steel for compatibility with a variety of materials
  • Spiral forming lobe pattern for reducing tapping torque
  • Cold-forms threads in through holes and blind holes without producing chips
  • Head: 90deg Flat Head Phillips Drive
  • Material: Stainless Steel with Black Zinc Plate
  • Threaded Length: 3.2mm
  • Thread Pitch: 0.64
  • Thread Size: M1.6
  • 2-1/2 Inches long
  • Tri-Point with 5/16-18 Threads
  • Flat Torx Head
  • Black Phosphate Hardened Steel
  • Thread Forming Screws
  • Slotted drive has a linear slot for use with a flat-blade driver
  • Hex washer head has a flange for additional grip with the mating surface
  • Plain surface has no finish or coating
  • 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
  • Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • If you have any questions about product, please feel free to contact us.
  • Round shank with square end, square end size: 0.55 x 0.55in
  • 1/2" NPT pipe taps Used to clean and chase rusted threads.
  • Made of HSS(High Speed Steel) Material.
  • Please read the dimensions carefully before buying this product.
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 3 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 52mm / 2 inch
  • Shank Side Width: 2.4mm / 0.1 inch; Thread Length: 17mm / 0.67 inch
  • Thread Size: 4-40 UNC; Class: 2B

More Info

1    2    3    4    5    6    7    8    9    10