Best Thread Forming Taps. Reviews September, 2020

5 Piece NPT Thread Forming Taps, Pipe taps are designed to clean or re-thread damaged or Jam Pipe threads, size: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt

Search only WMAZtool brand name
5 Piece NPT Thread Forming Taps, Pipe taps are designed to clean or re-thread damaged or Jam Pipe threads, size: 1/8

Current price: 26.99 USD


Check price and availability


  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads

More Info

Morse Cutting Tools 36452 Thread Forming Taps, High-Speed Steel, Bright Finish, Bottom Style, D7 Pitch Diameter Limit, M5 x 0.80 Size

Search only Morse Cutting Tools brand name
Morse Cutting Tools 36452 Thread Forming Taps, High-Speed Steel, Bright Finish, Bottom Style, D7 Pitch Diameter Limit, M5 x 0.80 Size

Current price: 15.3 USD


Check price and availability


  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105

More Info

uxcell Thread Forming Tap M2 Thread 0.4 Pitch H2 HSS Titanium Coated

Search only uxcell brand name
uxcell Thread Forming Tap M2 Thread 0.4 Pitch H2 HSS Titanium Coated

Current price: 9.09 USD


Check price and availability


  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Thread Length: 11mm / 0.43 inch; Total Length: 43mm / 1.7 inch
  • Thread Size: M2; Pitch: 0.4; Shank Side Width: 2.2mm / 0.1 inch

More Info

Thread Forming Tap, Mbot, Co, S/O, 2-56, H2

Search only Osg brand name
Thread Forming Tap, Mbot, Co, S/O, 2-56, H2

Current price: 28.91 USD


Check price and availability


Weight: 0.000625 Pounds

  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Thread Length: 11mm / 0.43 inch; Total Length: 43mm / 1.7 inch
  • Thread Size: M2; Pitch: 0.4; Shank Side Width: 2.2mm / 0.1 inch
  • Steam-oxide finish prevents tools from welding
  • Cobalt steel provides extended tool life compared to high-speed steel taps
  • Modified bottoming tap can reach to the bottom of a blind hole to cut threads

More Info

uxcell Metric Machine Tap M20 Thread 2.5 Pitch 4 Straight Flutes High Speed Steel

Search only uxcell brand name
uxcell Metric Machine Tap M20 Thread 2.5 Pitch 4 Straight Flutes High Speed Steel

Current price: 16.19 USD


Check price and availability


  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Thread Length: 11mm / 0.43 inch; Total Length: 43mm / 1.7 inch
  • Thread Size: M2; Pitch: 0.4; Shank Side Width: 2.2mm / 0.1 inch
  • Steam-oxide finish prevents tools from welding
  • Cobalt steel provides extended tool life compared to high-speed steel taps
  • Modified bottoming tap can reach to the bottom of a blind hole to cut threads
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 113mm
  • Shank Side Width: 11mm; Thread Length: 38mm
  • Metric Thread Size: M20 x 2.5

More Info

Union Butterfield 16415/16X18H5 Thread Forming Taps, TIN Coating, Full Bottoming, UNC5/16, Full Length 2.23/32", Flute Length 11/16", Shank Diameter 0.318"

Search only Union Butterfield brand name
Union Butterfield 16415/16X18H5 Thread Forming Taps, TIN Coating, Full Bottoming, UNC5/16, Full Length 2.23/32

Current price: 52.73 USD


Check price and availability


  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Thread Length: 11mm / 0.43 inch; Total Length: 43mm / 1.7 inch
  • Thread Size: M2; Pitch: 0.4; Shank Side Width: 2.2mm / 0.1 inch
  • Steam-oxide finish prevents tools from welding
  • Cobalt steel provides extended tool life compared to high-speed steel taps
  • Modified bottoming tap can reach to the bottom of a blind hole to cut threads
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 113mm
  • Shank Side Width: 11mm; Thread Length: 38mm
  • Metric Thread Size: M20 x 2.5
  • Hss-pm material
  • Right direction
  • TiN coating

More Info

Kodiak Cutting Tools KCT210439 USA Made Roll/Thread Forming Tap, H5 Limit, Plug Style, High Speed Steel, TiN Coated, 5/16-18 Size

Search only Kodiak Cutting Tools brand name
Kodiak Cutting Tools KCT210439 USA Made Roll/Thread Forming Tap, H5 Limit, Plug Style, High Speed Steel, TiN Coated, 5/16-18 Size

Current price: 17.8 USD


Check price and availability


  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Thread Length: 11mm / 0.43 inch; Total Length: 43mm / 1.7 inch
  • Thread Size: M2; Pitch: 0.4; Shank Side Width: 2.2mm / 0.1 inch
  • Steam-oxide finish prevents tools from welding
  • Cobalt steel provides extended tool life compared to high-speed steel taps
  • Modified bottoming tap can reach to the bottom of a blind hole to cut threads
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 113mm
  • Shank Side Width: 11mm; Thread Length: 38mm
  • Metric Thread Size: M20 x 2.5
  • Hss-pm material
  • Right direction
  • TiN coating
  • H5 LIMIT
  • 2-23/32 Overall Length
  • 1-1/8 THREAD LENGTH
  • .318 SHK DIA
  • Made In the USA

More Info

IRWIN Tools 1840234 Performance Threading System Plug Tap Set -Machine Screw/Fractional/Metric, 41-Piece

Search only IRWIN brand name
IRWIN Tools 1840234 Performance Threading System Plug Tap Set -Machine Screw/Fractional/Metric, 41-Piece

Current price: 144.08 USD


Check price and availability


Height: 2.15 Inches

Length: 14.125 Inches

Width: 10 Inches

Weight: 4 Pounds

  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Thread Length: 11mm / 0.43 inch; Total Length: 43mm / 1.7 inch
  • Thread Size: M2; Pitch: 0.4; Shank Side Width: 2.2mm / 0.1 inch
  • Steam-oxide finish prevents tools from welding
  • Cobalt steel provides extended tool life compared to high-speed steel taps
  • Modified bottoming tap can reach to the bottom of a blind hole to cut threads
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 113mm
  • Shank Side Width: 11mm; Thread Length: 38mm
  • Metric Thread Size: M20 x 2.5
  • Hss-pm material
  • Right direction
  • TiN coating
  • H5 LIMIT
  • 2-23/32 Overall Length
  • 1-1/8 THREAD LENGTH
  • .318 SHK DIA
  • Made In the USA
  • Tap set includes Performance Threading System drive tools and machine screw, fractional and metric plug taps
  • Drive with die stock, 3-inch ratchet or included T-handle and drive with an adjustable jaw
  • Accommodates standard 1-inch hex dies
  • Ergonomic handles offer more control and comfort when threading
  • This tap set helps eliminate the need for a set-screw; simply twist to insert and remove die

More Info

uxcell Machine Tap 4-40UNC Thread Pitch 2B Class 3 Flutes High Speed Steel with Protective Box 2pcs

Search only uxcell brand name
uxcell Machine Tap 4-40UNC Thread Pitch 2B Class 3 Flutes High Speed Steel with Protective Box 2pcs

Current price: 10.19 USD


Check price and availability


  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Thread Length: 11mm / 0.43 inch; Total Length: 43mm / 1.7 inch
  • Thread Size: M2; Pitch: 0.4; Shank Side Width: 2.2mm / 0.1 inch
  • Steam-oxide finish prevents tools from welding
  • Cobalt steel provides extended tool life compared to high-speed steel taps
  • Modified bottoming tap can reach to the bottom of a blind hole to cut threads
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 113mm
  • Shank Side Width: 11mm; Thread Length: 38mm
  • Metric Thread Size: M20 x 2.5
  • Hss-pm material
  • Right direction
  • TiN coating
  • H5 LIMIT
  • 2-23/32 Overall Length
  • 1-1/8 THREAD LENGTH
  • .318 SHK DIA
  • Made In the USA
  • Tap set includes Performance Threading System drive tools and machine screw, fractional and metric plug taps
  • Drive with die stock, 3-inch ratchet or included T-handle and drive with an adjustable jaw
  • Accommodates standard 1-inch hex dies
  • Ergonomic handles offer more control and comfort when threading
  • This tap set helps eliminate the need for a set-screw; simply twist to insert and remove die
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 3 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 52mm / 2 inch
  • Shank Side Width: 2.4mm / 0.1 inch; Thread Length: 17mm / 0.67 inch
  • Thread Size: 4-40 UNC; Class: 2B

More Info

Titan TT82810 High Speed Steel Thread Forming Bottom Tap, Uncoated, 2" - 56", H3 Limit, 0.141" Shank Diameter, 7/16" Thread Length, 1-3/4" Overall Length

Search only Titan brand name
Titan TT82810 High Speed Steel Thread Forming Bottom Tap, Uncoated, 2

Current price: 26.96 USD


Check price and availability


  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Nominal size of the tap is that of the pipe fitting being tapped
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt
  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads
  • Package Weight : 0.023 kilograms
  • Thread Form Tap
  • 4 Lube Grooves
  • List No. 2105
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Thread Length: 11mm / 0.43 inch; Total Length: 43mm / 1.7 inch
  • Thread Size: M2; Pitch: 0.4; Shank Side Width: 2.2mm / 0.1 inch
  • Steam-oxide finish prevents tools from welding
  • Cobalt steel provides extended tool life compared to high-speed steel taps
  • Modified bottoming tap can reach to the bottom of a blind hole to cut threads
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 113mm
  • Shank Side Width: 11mm; Thread Length: 38mm
  • Metric Thread Size: M20 x 2.5
  • Hss-pm material
  • Right direction
  • TiN coating
  • H5 LIMIT
  • 2-23/32 Overall Length
  • 1-1/8 THREAD LENGTH
  • .318 SHK DIA
  • Made In the USA
  • Tap set includes Performance Threading System drive tools and machine screw, fractional and metric plug taps
  • Drive with die stock, 3-inch ratchet or included T-handle and drive with an adjustable jaw
  • Accommodates standard 1-inch hex dies
  • Ergonomic handles offer more control and comfort when threading
  • This tap set helps eliminate the need for a set-screw; simply twist to insert and remove die
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • Straight 3 flutes are ground to provide rapid chip removal for efficient threading.
  • Material: HSS (High Speed Steel); Total Length: 52mm / 2 inch
  • Shank Side Width: 2.4mm / 0.1 inch; Thread Length: 17mm / 0.67 inch
  • Thread Size: 4-40 UNC; Class: 2B
  • High Speed Steel
  • Thread Forming Roll Tap
  • Made in USA

More Info

1    2    3    4    5    6    7    8    9    10