Best Water Pipe Heat Cables. Reviews March, 2020

Frost King HC30A Heating Cables, 30 Feet, Black

Search only Frost King brand name
Frost King HC30A Heating Cables, 30 Feet, Black

Current price: 25.97 USD


Check price and availability


Height: 1.5 Inches

Length: 9.5 Inches

Width: 8.5 Inches

Weight: 1.5 Pounds

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes

More Info

Thermwell Products HC18 Pipe Heat Cable 18 ft.

Search only Frost King brand name
Thermwell Products HC18 Pipe Heat Cable 18 ft.

Current price: 20.95 USD


Check price and availability


Height: 1.4 Inches

Length: 9.5 Inches

Width: 8.5 Inches

Weight: 1 Pounds

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.

More Info

EasyHeat 2102 Freeze Free Heating Cable - 100'

Search only Easy Heat brand name
EasyHeat 2102 Freeze Free Heating Cable - 100'

Current price: 130.82 USD


Check price and availability


Height: 2.8 Inches

Length: 8.9 Inches

Width: 8.6 Inches

Weight: 4 Pounds

Warranty: N/A

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system

More Info

Heat Tape for Water Pipes Premium Pipe Freeze Protection Cable with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 6 feet, 120 volt

Search only Radiant Solutions Company brand name
Heat Tape for Water Pipes Premium Pipe Freeze Protection Cable with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 6 feet, 120 volt

Current price: 45.1 USD


Check price and availability


  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Email us at [email protected]
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.

More Info

HEATIT JHSF 120-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

Search only HEATIT brand name
HEATIT JHSF 120-feet 120V Self Regulating Pre-assembled Pipe Heating Cable

Current price: 118.99 USD


Check price and availability


Height: 4 Inches

Length: 12 Inches

Width: 4 Inches

Weight: 2.6 Pounds

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Email us at [email protected]
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).

More Info

Wrap-On Pipe Heating Cable - 3-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31003

Search only Wrap-On brand name
Wrap-On Pipe Heating Cable - 3-Feet, 120 Volt, Built-in Thermostat, Low Wattage - 31003

Current price: 22.99 USD


Check price and availability


Height: 0.5 Inches

Length: 36 Inches

Width: 2 Inches

Weight: 0.4 Pounds

Warranty: 2 year manufacturer

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Email us at [email protected]
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.

More Info

HEATIT HISD 6-feet Pipe Heating Cable with with Built-in Thermostat, Black

Search only HEATIT brand name
HEATIT HISD 6-feet Pipe Heating Cable with with Built-in Thermostat, Black

Current price: 17.99 USD

Saving: $42.00 (70%)


Check price and availability


Height: 28 Inches

Length: 5 Inches

Width: 19 Inches

Weight: 0.37 Pounds

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Email us at [email protected]
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.

More Info

HEATIT Mobile Home 100-feet HEATIT HTM Braid Self Regulating heating cable Water Line Freeze Protection

Search only HEATIT brand name
HEATIT Mobile Home 100-feet HEATIT HTM Braid Self Regulating heating cable Water Line Freeze Protection

Current price: 111.99 USD


Check price and availability


Weight: 2.6 Pounds

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Email us at [email protected]
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.Three year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • HEATIT is registered Trademark by zhukeshi (We didn't authorize other sellers in Amazon.com). HTM self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.

More Info

PHOENIX CABLES USA Pro Cold Weather Valve and Water Pipe Heating Cable/Multi-use for rigid plastic or metal pipes, preventing RV hose freezing or down a gutter downspout (3 Feet)

Search only PHOENIX CABLES USA brand name
PHOENIX CABLES USA Pro Cold Weather Valve and Water Pipe Heating Cable/Multi-use for rigid plastic or metal pipes, preventing RV hose freezing or down a gutter downspout (3 Feet)

Current price: 16.99 USD


Check price and availability


Height: 1 Inches

Length: 1 Inches

Width: 1 Inches

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Email us at [email protected]
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.Three year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • HEATIT is registered Trademark by zhukeshi (We didn't authorize other sellers in Amazon.com). HTM self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
  • UL APPROVED, CSA CERTIFIED – Made of superior industrial grade heat shrinkage tube for connection, our cable is considered to be the safest per industry standards. Set up includes: cable, grounded plug, built-in automatic thermostat and easy to understand instructions. Our cables plug into a standard 150 VAC outlet.
  • SAFETY TESTED FOR ALL SEASONS – Compromise elsewhere when it comes to the safety of your home. Get peace of mind with our safety rated cables constructed with a continuous ground braid with a tough and durable polyurethane inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Approved for water filled plastic (including PEX) and metal pipes only.
  • SAVE MONEY ON ENERGY AND – 120 Volt, 7 watts/ft. and only use 5 amps or less of electricity making our cables for a low economical footprint. Saves you money by using less energy by powering the cable only when needed by automatically turning on below 28° F (3° C) and off above 85° F (7 ° C).
  • SAVE THOUSANDS ON COSTLY REPAIRS – Don’t wait before it’s too late and get stuck paying thousands of dollars on unexpected repairs that could be avoided. Our high-grade cables are tough and durable enough for rigid plastic and metal pipes up to 2. 5” (58mm) in diameter. With our trace cables you’ll always stay prepared for the unexpected.
  • QUICK AND EASY INSTALL – No more confusing instructions! Set it up and forget it with confidence the first time around with our easy to understand BONUS eBook. Our heat for water pipes install effortlessly for constant water flowing down to -40° F (-40° C) without monitoring thanks to the built-in thermostat. Rest assured as the indicator light let’s you know your Phoenix cable is ready to take on the harshest seasons.

More Info

HEATIT JHSF 24-feet 120V Regulating Pre-assembled Pipe Cable

Search only HEATIT brand name
HEATIT JHSF 24-feet 120V Regulating Pre-assembled Pipe Cable

Current price: 27.99 USD


Check price and availability


Height: 3 Inches

Length: 21 Inches

Width: 4 Inches

Weight: 1.11 Pounds

  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • For metal and plastic pipes
  • Keeps water flowing down to -40 degrees F.
  • 120V, 7 watts per ft.
  • 18 ft. Length.
  • Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
  • Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
  • Reduces power consumption when the pipe does not require freeze protection
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Self-regulating pipe heating system
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Email us at [email protected]
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • MADE IN THE USA
  • USE ON ALL RIGID PIPES - PVC, CPVC, copper and metal pipes.
  • ENERGY EFFICIENT - Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
  • PRESS-TO-TEST BUTTON - Exclusive feature to test cable before or after installation.
  • BUILT-IN THERMOSTAT - Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F - Simply wrap on, insulate and plug in. Insulation sold separately.
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water.Three year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape.
  • ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • HEATIT is registered Trademark by zhukeshi (We didn't authorize other sellers in Amazon.com). HTM self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection.
  • UL APPROVED, CSA CERTIFIED – Made of superior industrial grade heat shrinkage tube for connection, our cable is considered to be the safest per industry standards. Set up includes: cable, grounded plug, built-in automatic thermostat and easy to understand instructions. Our cables plug into a standard 150 VAC outlet.
  • SAFETY TESTED FOR ALL SEASONS – Compromise elsewhere when it comes to the safety of your home. Get peace of mind with our safety rated cables constructed with a continuous ground braid with a tough and durable polyurethane inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Approved for water filled plastic (including PEX) and metal pipes only.
  • SAVE MONEY ON ENERGY AND – 120 Volt, 7 watts/ft. and only use 5 amps or less of electricity making our cables for a low economical footprint. Saves you money by using less energy by powering the cable only when needed by automatically turning on below 28° F (3° C) and off above 85° F (7 ° C).
  • SAVE THOUSANDS ON COSTLY REPAIRS – Don’t wait before it’s too late and get stuck paying thousands of dollars on unexpected repairs that could be avoided. Our high-grade cables are tough and durable enough for rigid plastic and metal pipes up to 2. 5” (58mm) in diameter. With our trace cables you’ll always stay prepared for the unexpected.
  • QUICK AND EASY INSTALL – No more confusing instructions! Set it up and forget it with confidence the first time around with our easy to understand BONUS eBook. Our heat for water pipes install effortlessly for constant water flowing down to -40° F (-40° C) without monitoring thanks to the built-in thermostat. Rest assured as the indicator light let’s you know your Phoenix cable is ready to take on the harshest seasons.
  • Testing the cable before the instaation. Uncoil the cable, plug in the heating cable and then put the therstat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrkage tube for conction.The lowest insllation temature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
  • Pre-asmbled, easy to install. Including grounded plug with light, built in thermtat(turn the cable 37F on 50F off), and instrtions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulang heting cable output will adjust autotically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the ambent tempeture is below 37F/3 degree C. Please test the cable in a cold envinment. HEATIT is registed Traemark by zhushi(We didn't authorize other sellers in Amazon.com).

More Info

1    2    3    4    5    6    7    8    9    10