Best Water Pipes. Reviews March, 2020

OYI Industrial Steampunk Wall Sconce, 5 Lights Vintage Metal Water Pipe Style Wall Light Lamp Rustic Wall Mount Light Fixture in Copper Finish

Search only OYI brand name
OYI Industrial Steampunk Wall Sconce, 5 Lights Vintage Metal Water Pipe Style Wall Light Lamp Rustic Wall Mount Light Fixture in Copper Finish

Current price: 99.99 USD


Check price and availability


Height: 43 Centimeters

Width: 92 Centimeters

Weight: 5.7 Kilograms

  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.

More Info

SharkBite U870W500 PEX Pipe 3/4 Inch, White, Flexible Water Pipe Tubing, Potable Water, Push-to-Connect Plumbing Fittings, 500 Feet Coil of Piping

Search only SharkBite brand name
SharkBite U870W500 PEX Pipe 3/4 Inch, White, Flexible Water Pipe Tubing, Potable Water, Push-to-Connect Plumbing Fittings, 500 Feet Coil of Piping

Current price: 219.44 USD


Check price and availability


Height: 33 Inches

Length: 11 Inches

Width: 33 Inches

Warranty: Limited 25 Year

  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI

More Info

EFIELD PEX Pipe/Tubing (NSF Certified) BLUE&RED 3/4 inch 2X 300ft Rolls 600FT Length For Potable Water with Free Pipe Cutter

Search only Efield brand name
EFIELD PEX Pipe/Tubing (NSF Certified) BLUE&RED 3/4 inch 2X 300ft Rolls 600FT Length For Potable Water with Free Pipe Cutter

Current price: 199.99 USD


Check price and availability


  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI
  • CHEMICAL RESISTANT - PEX Pipe Resist AGAINST Chlorine
  • PEX-B Combo - 3/4" 300ft Blue Pex + 300ft Red PEX 600 ft in Total With Pipe Cutter
  • Efield Pex Pipe is NSF Certified
  • EFIELD PEX-B Tubing for Potable Water and Hot Water Applications
  • EFIELD PEX-B Pipe Directly From the Real Famous Pex Factory with NSF Approval

More Info

HEATIT JHSF 18-feet 120V Self Regulting Pre-assembled Pipe Cable

Search only HEATIT brand name
HEATIT JHSF 18-feet 120V Self Regulting Pre-assembled Pipe Cable

Current price: 25.99 USD

Saving: $58.26 (69%)


Check price and availability


Height: 3 Inches

Length: 21 Inches

Width: 4 Inches

Weight: 0.77 Pounds

  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI
  • CHEMICAL RESISTANT - PEX Pipe Resist AGAINST Chlorine
  • PEX-B Combo - 3/4" 300ft Blue Pex + 300ft Red PEX 600 ft in Total With Pipe Cutter
  • Efield Pex Pipe is NSF Certified
  • EFIELD PEX-B Tubing for Potable Water and Hot Water Applications
  • EFIELD PEX-B Pipe Directly From the Real Famous Pex Factory with NSF Approval
  • Testing the cable before the instalation. Uncoil the cable, plug in the heting cable and then put the therstat part of the cable into an ice bucket for few minutes. When the temperure is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Indstrial grade heat shrinkage tube for conntion.The lowest instalation tempature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low tempature) as out jacket. Ingress Prottion 65. Durable
  • Pre-assembled, easy to install. Including groded plug with light, built in theostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitble for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost proction etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the abient tempeture is below 37F/3 degree C. Please test the cable in a cold envinment. HEATIT is regisred Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).

More Info

HEATIT HISD 6-feet Pipe Heating Cable with with Built-in Thermostat, Black

Search only HEATIT brand name
HEATIT HISD 6-feet Pipe Heating Cable with with Built-in Thermostat, Black

Current price: 17.99 USD

Saving: $42.00 (70%)


Check price and availability


Height: 28 Inches

Length: 5 Inches

Width: 19 Inches

Weight: 0.37 Pounds

  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI
  • CHEMICAL RESISTANT - PEX Pipe Resist AGAINST Chlorine
  • PEX-B Combo - 3/4" 300ft Blue Pex + 300ft Red PEX 600 ft in Total With Pipe Cutter
  • Efield Pex Pipe is NSF Certified
  • EFIELD PEX-B Tubing for Potable Water and Hot Water Applications
  • EFIELD PEX-B Pipe Directly From the Real Famous Pex Factory with NSF Approval
  • Testing the cable before the instalation. Uncoil the cable, plug in the heting cable and then put the therstat part of the cable into an ice bucket for few minutes. When the temperure is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Indstrial grade heat shrinkage tube for conntion.The lowest instalation tempature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low tempature) as out jacket. Ingress Prottion 65. Durable
  • Pre-assembled, easy to install. Including groded plug with light, built in theostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitble for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost proction etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the abient tempeture is below 37F/3 degree C. Please test the cable in a cold envinment. HEATIT is regisred Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.

More Info

SHURFLO (255-313) 1/2" Twist-On Pipe Strainer

Search only SHURFLO brand name
SHURFLO (255-313) 1/2

Current price: 7.5 USD

Saving: $6.10 (45%)


Check price and availability


Height: 6.25 Inches

Length: 2.25 Inches

Width: 4.75 Inches

Weight: 0.2 Pounds

Warranty: N/A

  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI
  • CHEMICAL RESISTANT - PEX Pipe Resist AGAINST Chlorine
  • PEX-B Combo - 3/4" 300ft Blue Pex + 300ft Red PEX 600 ft in Total With Pipe Cutter
  • Efield Pex Pipe is NSF Certified
  • EFIELD PEX-B Tubing for Potable Water and Hot Water Applications
  • EFIELD PEX-B Pipe Directly From the Real Famous Pex Factory with NSF Approval
  • Testing the cable before the instalation. Uncoil the cable, plug in the heting cable and then put the therstat part of the cable into an ice bucket for few minutes. When the temperure is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Indstrial grade heat shrinkage tube for conntion.The lowest instalation tempature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low tempature) as out jacket. Ingress Prottion 65. Durable
  • Pre-assembled, easy to install. Including groded plug with light, built in theostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitble for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost proction etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the abient tempeture is below 37F/3 degree C. Please test the cable in a cold envinment. HEATIT is regisred Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Easy Assembly, Keeps Debris Out of Pump, Easy to See When Strainer Needs Cleaning, 50 Mesh Stainless Steel Screen, Twist-On Water Strainer, 1/2 inch NPSM Inlet, 1/2 inch NPSM Outlet
  • Easy disassembly, cleaning and reassembly
  • Transparent design shows when it is time to clean the bowl
  • Screws directly onto the pump head
  • SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump

More Info

Rinnai RUC98iN Ultra Series Indoor Natural Gas Tankless Water Heater, Twin Pipe

Search only Rinnai brand name
Rinnai RUC98iN Ultra Series Indoor Natural Gas Tankless Water Heater, Twin Pipe

Current price: 1504.99 USD


Check price and availability


Height: 26 Inches

Length: 10 Inches

Width: 18.5 Inches

Weight: 82 Pounds

Warranty: Residential: Limited 12-year on heat exchanger, 5-year on parts, 1-year on labor (5-year optional on labor)
Commercial: Limited 5-year on heat exchanger, 5-year on parts, 1-year on labor (2-year optional on labor)

  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI
  • CHEMICAL RESISTANT - PEX Pipe Resist AGAINST Chlorine
  • PEX-B Combo - 3/4" 300ft Blue Pex + 300ft Red PEX 600 ft in Total With Pipe Cutter
  • Efield Pex Pipe is NSF Certified
  • EFIELD PEX-B Tubing for Potable Water and Hot Water Applications
  • EFIELD PEX-B Pipe Directly From the Real Famous Pex Factory with NSF Approval
  • Testing the cable before the instalation. Uncoil the cable, plug in the heting cable and then put the therstat part of the cable into an ice bucket for few minutes. When the temperure is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Indstrial grade heat shrinkage tube for conntion.The lowest instalation tempature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low tempature) as out jacket. Ingress Prottion 65. Durable
  • Pre-assembled, easy to install. Including groded plug with light, built in theostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitble for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost proction etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the abient tempeture is below 37F/3 degree C. Please test the cable in a cold envinment. HEATIT is regisred Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Easy Assembly, Keeps Debris Out of Pump, Easy to See When Strainer Needs Cleaning, 50 Mesh Stainless Steel Screen, Twist-On Water Strainer, 1/2 inch NPSM Inlet, 1/2 inch NPSM Outlet
  • Easy disassembly, cleaning and reassembly
  • Transparent design shows when it is time to clean the bowl
  • Screws directly onto the pump head
  • SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump
  • 199,000 max BTU
  • Ultra low NOx emissions
  • The space-saving design allows Indoor Installation type
  • Up to 0.96 Energy Factor/Up to 0.92 Uniform Energy Factor
  • Concentric or PVC venting option
  • INDOOR installation only. Fuel Type: NATURAL GAS.

More Info

Frost King HC30A Heating Cables, 30 Feet, Black

Search only Frost King brand name
Frost King HC30A Heating Cables, 30 Feet, Black

Current price: 25.97 USD


Check price and availability


Height: 1.5 Inches

Length: 9.5 Inches

Width: 8.5 Inches

Weight: 1.5 Pounds

  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI
  • CHEMICAL RESISTANT - PEX Pipe Resist AGAINST Chlorine
  • PEX-B Combo - 3/4" 300ft Blue Pex + 300ft Red PEX 600 ft in Total With Pipe Cutter
  • Efield Pex Pipe is NSF Certified
  • EFIELD PEX-B Tubing for Potable Water and Hot Water Applications
  • EFIELD PEX-B Pipe Directly From the Real Famous Pex Factory with NSF Approval
  • Testing the cable before the instalation. Uncoil the cable, plug in the heting cable and then put the therstat part of the cable into an ice bucket for few minutes. When the temperure is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Indstrial grade heat shrinkage tube for conntion.The lowest instalation tempature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low tempature) as out jacket. Ingress Prottion 65. Durable
  • Pre-assembled, easy to install. Including groded plug with light, built in theostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitble for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost proction etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the abient tempeture is below 37F/3 degree C. Please test the cable in a cold envinment. HEATIT is regisred Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Easy Assembly, Keeps Debris Out of Pump, Easy to See When Strainer Needs Cleaning, 50 Mesh Stainless Steel Screen, Twist-On Water Strainer, 1/2 inch NPSM Inlet, 1/2 inch NPSM Outlet
  • Easy disassembly, cleaning and reassembly
  • Transparent design shows when it is time to clean the bowl
  • Screws directly onto the pump head
  • SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump
  • 199,000 max BTU
  • Ultra low NOx emissions
  • The space-saving design allows Indoor Installation type
  • Up to 0.96 Energy Factor/Up to 0.92 Uniform Energy Factor
  • Concentric or PVC venting option
  • INDOOR installation only. Fuel Type: NATURAL GAS.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes

More Info

Device Handmade Hammer 5 Inch Gray and Clear

Search only Unknown brand name
Device Handmade Hammer 5 Inch Gray and Clear

Current price: 15.49 USD

Saving: $6.51 (30%)


Check price and availability


  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI
  • CHEMICAL RESISTANT - PEX Pipe Resist AGAINST Chlorine
  • PEX-B Combo - 3/4" 300ft Blue Pex + 300ft Red PEX 600 ft in Total With Pipe Cutter
  • Efield Pex Pipe is NSF Certified
  • EFIELD PEX-B Tubing for Potable Water and Hot Water Applications
  • EFIELD PEX-B Pipe Directly From the Real Famous Pex Factory with NSF Approval
  • Testing the cable before the instalation. Uncoil the cable, plug in the heting cable and then put the therstat part of the cable into an ice bucket for few minutes. When the temperure is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Indstrial grade heat shrinkage tube for conntion.The lowest instalation tempature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low tempature) as out jacket. Ingress Prottion 65. Durable
  • Pre-assembled, easy to install. Including groded plug with light, built in theostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitble for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost proction etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the abient tempeture is below 37F/3 degree C. Please test the cable in a cold envinment. HEATIT is regisred Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Easy Assembly, Keeps Debris Out of Pump, Easy to See When Strainer Needs Cleaning, 50 Mesh Stainless Steel Screen, Twist-On Water Strainer, 1/2 inch NPSM Inlet, 1/2 inch NPSM Outlet
  • Easy disassembly, cleaning and reassembly
  • Transparent design shows when it is time to clean the bowl
  • Screws directly onto the pump head
  • SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump
  • 199,000 max BTU
  • Ultra low NOx emissions
  • The space-saving design allows Indoor Installation type
  • Up to 0.96 Energy Factor/Up to 0.92 Uniform Energy Factor
  • Concentric or PVC venting option
  • INDOOR installation only. Fuel Type: NATURAL GAS.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Use with water
  • Fast and Free shipping
  • Size 5 inch
  • Premium quality
  • Portable

More Info

Heat Cable for Pipe Freeze Protection, 100 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt

Search only Radiant Solutions Company brand name
Heat Cable for Pipe Freeze Protection, 100 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt

Current price: 159.95 USD


Check price and availability


  • ★ If any missing part or any other unexpected issue, free replacement will be shipped immediately. Please shop with confidence.
  • ★ Wide used in indoor lighting including Living Room, Dining Room, Hallway, Foyer, Corridor, Loft, Basement, Restaurant, Cafe, Bar, Club and so on.
  • ★ Requires 5 bulbs(★Bulb NOT included), 40W Max. each. Bulb types can use Edison Bulb, LED, CFL, Incandescent. E26 bulb base with UL LISTED.
  • ★ Fixture Width: 36.22inch, Fixture Height: 15.75inch. Made of premium metal. Easy installation.
  • ★ Industrial steampunk wall Sconce rustic metal water pipe style wall light, unique antique look adds more personality to your home decor.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications; PEX hose is great for repairs, and easy to cut with SharkBite shears
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant
  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems; chlorine and UV resistant; minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI
  • CHEMICAL RESISTANT - PEX Pipe Resist AGAINST Chlorine
  • PEX-B Combo - 3/4" 300ft Blue Pex + 300ft Red PEX 600 ft in Total With Pipe Cutter
  • Efield Pex Pipe is NSF Certified
  • EFIELD PEX-B Tubing for Potable Water and Hot Water Applications
  • EFIELD PEX-B Pipe Directly From the Real Famous Pex Factory with NSF Approval
  • Testing the cable before the instalation. Uncoil the cable, plug in the heting cable and then put the therstat part of the cable into an ice bucket for few minutes. When the temperure is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
  • ETL approved. 2 ft 18/3 cold lead with plug. Indstrial grade heat shrinkage tube for conntion.The lowest instalation tempature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low tempature) as out jacket. Ingress Prottion 65. Durable
  • Pre-assembled, easy to install. Including groded plug with light, built in theostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
  • Suitble for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost proction etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
  • JHSF doesn't work unless the abient tempeture is below 37F/3 degree C. Please test the cable in a cold envinment. HEATIT is regisred Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • Copper
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don't plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight.
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 68F on39F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don't hesitate to contact our customer service in any time, we'll try our best to solve your issues.
  • Easy Assembly, Keeps Debris Out of Pump, Easy to See When Strainer Needs Cleaning, 50 Mesh Stainless Steel Screen, Twist-On Water Strainer, 1/2 inch NPSM Inlet, 1/2 inch NPSM Outlet
  • Easy disassembly, cleaning and reassembly
  • Transparent design shows when it is time to clean the bowl
  • Screws directly onto the pump head
  • SHURFLO CLASSIC SERIES STRAINER - Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump
  • 199,000 max BTU
  • Ultra low NOx emissions
  • The space-saving design allows Indoor Installation type
  • Up to 0.96 Energy Factor/Up to 0.92 Uniform Energy Factor
  • Concentric or PVC venting option
  • INDOOR installation only. Fuel Type: NATURAL GAS.
  • Easy to install
  • For metal and plastic water pipes
  • Keeps water flowing down to (-40) degrees F
  • For metal and plastic residential water pipes
  • Use with water
  • Fast and Free shipping
  • Size 5 inch
  • Premium quality
  • Portable
  • USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
  • HEAVY DUTY: Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24” unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.
  • TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
  • AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions. Phone: 877-387-4218, or email us at [email protected]
  • THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. We’ve received a couple bad reviews from people testing the cables in their living rooms. Please don’t be that guy.

More Info

1    2    3    4    5    6    7    8    9    10